Dude - I have seen a lot of these videos. And in the first minute of your video - you got shiz I have no idea what it even is or was. Haha. Oustanding. Good work.
Thank you... It should be a good head to head... they're both upgraded about as much as possible. But even now they are similar in some ways they are very different RCs
Beautiful Rig my friend….truly nice….. As an E-Revo 2.0 owner for a couple of years now I’ll just tell you that like you I did the aluminum skid plates and servo guards etc and it turned out to be a waste of money…. If you do any off road bashing etc these expensive parts will bend after any type of impact…. There is no flex in these parts and the way they transfer energy you’ll wind up stripping out where the parts attach to the chassis…. Other than the steering….. I went back to Traxxas factory parts ……. Aluminum hop-up are truly awesome but I’d rather replace a skid plate that costs a few dollars than replace that same part and spend $30…. Just my opinion…… thanks for sharing ☮️~~~>Out! 😎👍🏻👍🏻
I definitely agree sometimes plastic is better... I didn't have to high of expectations for the skids although they're holding up im sure at some point they will give. I have another Erevo that's mostly stock and it does pritty good the way it is but I wanted another one with all the upgrades also... thank you for taking the time to comment my friend
Sick only difference in mine to yours is I out the Maxx lights on mine and I have the updated blue push rods everything else is spot on. I need the front strapped like my rear tho... Never seen the front done!! Way sick!!
@@fxrc3086 yea lmk how that esc motor is because I have the stockers. once those blow I'll definitely look into hobby wing. Space is limited that's the kicker.
Get motor heatsink and fans. Use one servo, get rpm bumpers, ditch those fancy rods, bc the will break on you, the 2nd version gray rods are GOOD Aluminum shock mounts will break not bend like plastic! At least you have the best tires.
I saw ur other comment under notifications but it wouldn't let me reply to it... I just got it a couple of months ago... but I got it as a brand new slider so im not sure when it was manufactured👍👍
@@fxrc3086 any reasons to use XT90s rather than the traxxas connectors? I’m going to an XLX2 esc and I want to solder my new traxxas connectors so I don’t have to change batteries and chargers
So I just got the E Revo 2.0 Saturday drove it twice on the beginner setting and a gear broke and the car no longer moves is this a normal thing with these cars?
That is not normal... Traxxas has one of the best warranties in RC and will replace it quickly at no cost to you. But it still sucks having ur expensive RC brake so easily. If it was setup right at the factory it shouldn't have happened but u never no, sometimes RCs just break. The Erevo is a great rig but it has some flaws (as do all of them) but the gears are usually not that brittle and should hold up to way more abuse then just that little run...👍👍 dont let it discourage you from this Amazing hobby.
Have you done much running with this set up? It sure looks fantastic- I really love what you have done with this rig. I have never upgraded mine to any aluminum because I was afraid other things would break around it. But your set up looks so good. Thanks for the walk through here.
Thank you... I have done some runnings and its a beast... aluminum upgrades aren't always the best idea for bashing but if u put it in the right places it definitely helps... as far as upgrading, its just what I do, I cant help it.
@@fxrc3086 I agree- the right places matter for sure, and I feel where you decided to place your upgrades is really smart. I’m very curious to see how it holds up. If it works out, I think I’m going to follow your example.
I have a summit and erevo 2.0. I'm building a new ervo 2.0. only parts that fit erevo 2.0 is battery door, battery ventilation. body tower , center diffs but erevo 2 is longer. arms but revo2 are bigger, heavy duty.
Dang I couldn't cross my straps in front like you did... But I ran them straight.. so do you have an email by chance I wanted to show you e revo stuff I did to mine.
When I made this video I hadn't driven yet... I like to build it up and make the first videos when its new and shiny...I have since driven it a few times and its awsome.
Solid rig man, can't wait for videos of you sending it!
Thank you my friend... A running video will be coming soon👍👍
Probably don't even use it
Very nice E Revo 2.0
Thank you...👍👍
Looks incredible.
Thank you👍👍
Dude - I have seen a lot of these videos. And in the first minute of your video - you got shiz I have no idea what it even is or was. Haha. Oustanding. Good work.
Thank you 👍👍
Sick a** e-revo 2.0 👍🏾👍🏾🔥🔥
Awesome bro... thank you
Gotta get a set of those wheels and tires for the eventual replacement of my stock ones. The max6 combo looks great as well.
The tires are working out nice and with this power setup its a beast...thank you 👍👍
Wow pretty sweet rig you got there, looking clean. Kraton vs E Revo is the review to do. Subbed and watching
Thank you... It should be a good head to head... they're both upgraded about as much as possible. But even now they are similar in some ways they are very different RCs
Good job 🦇
Thank you
nice r-revo. more videos please
Thanks... its SPRING time now so I'll be doing a lot of bashing soon my friend
Men I would love to see a part list of the upgrades🙏
gah dang that is a super nice Revo
Thank you my friend...its still a work in progress... lots more upgrades going on and a new video soon.👍👍
@@fxrc3086 Awesome man i subbed and look forward to future updates
Beautiful Rig my friend….truly nice….. As an E-Revo 2.0 owner for a couple of years now I’ll just tell you that like you I did the aluminum skid plates and servo guards etc and it turned out to be a waste of money…. If you do any off road bashing etc these expensive parts will bend after any type of impact…. There is no flex in these parts and the way they transfer energy you’ll wind up stripping out where the parts attach to the chassis…. Other than the steering….. I went back to Traxxas factory parts ……. Aluminum hop-up are truly awesome but I’d rather replace a skid plate that costs a few dollars than replace that same part and spend $30…. Just my opinion…… thanks for sharing
☮️~~~>Out! 😎👍🏻👍🏻
I definitely agree sometimes plastic is better... I didn't have to high of expectations for the skids although they're holding up im sure at some point they will give. I have another Erevo that's mostly stock and it does pritty good the way it is but I wanted another one with all the upgrades also... thank you for taking the time to comment my friend
Great video, would have been even great if as you said provided the links for all parts in discription
Sick only difference in mine to yours is I out the Maxx lights on mine and I have the updated blue push rods everything else is spot on. I need the front strapped like my rear tho... Never seen the front done!! Way sick!!
Thank you... thats killer...its a cool truck... I thought about doing the push rods but the stock rod Ends on it look really rugged...
@@fxrc3086 for sure I guess I was 97 bucks deep and I just went another 50 lol the stock grey ones are ample for sure lol 🤘
@@fxrc3086 yea lmk how that esc motor is because I have the stockers. once those blow I'll definitely look into hobby wing. Space is limited that's the kicker.
@@never-stock-rc2968 I will... I've got a lot of maxx 6s and there awesome...I bet also a castle mamba 8s would fit if the maxx 6 fit
I know people find it useless to upgrade the braces where body latches on to but if u happen to crash it under a vehicle it will save you😂🙏🏽
Get motor heatsink and fans.
Use one servo, get rpm bumpers, ditch those fancy rods, bc the will break on you, the 2nd version gray rods are GOOD
Aluminum shock mounts will break not bend like plastic!
At least you have the best tires.
I think the Kraton is the best comparison to go head to head with. Drives more similar to the ERevo.
I do also... im so glad you checked out my RCs... thank you... both my kratons 8th scale are so upgraded that they weigh a bit more then my Erevo.
Sick ride ! Those tires hook up , I have them on my maxx.
Thank you.. perfect tire for the maxx... I went with the 3.8 trencher LP for my Maxx but Ive thought about switching them with these tires👍👍
You did change the ESC right after you bought that truck? What was the reason for that in the first place?
That is one nice revo! It’s too pretty to bash it now though.
Thank you... and I was kinda thinking the same thing... still going to give it hell though...
Hows the arms , pushrods and links holding up?
Haha love it Fox. So much for a stock build A? Looks amazing man I dig it.
Thank you my friend... its definitely turned out nice, im hopeful it will be a very rugged RC when im done...
What length are the front limiting straps? Never seen them used up front that’s pretty badass
They're 90mm but an 85mm would probably be better for the front
I saw ur other comment under notifications but it wouldn't let me reply to it... I just got it a couple of months ago... but I got it as a brand new slider so im not sure when it was manufactured👍👍
After running it What do you prefer duel servos or would you suggest just putting one powerful servo on the E Revo ?
The 2 servos haven't given me any trouble yet but I think with a strong enough servo one would be fine it just won't look as nice
I have a single 70 kg brushless servo on mine and it's great
Awesome Revo! What battery connectors are you using on your Esc wires? XT90 ?
Thank you... they're just black XT90s
@@fxrc3086 any reasons to use XT90s rather than the traxxas connectors? I’m going to an XLX2 esc and I want to solder my new traxxas connectors so I don’t have to change batteries and chargers
@@ctbcrf50 you can use traxxas connectors on an xlx2 👍👍
So I just got the E Revo 2.0 Saturday drove it twice on the beginner setting and a gear broke and the car no longer moves is this a normal thing with these cars?
That is not normal... Traxxas has one of the best warranties in RC and will replace it quickly at no cost to you. But it still sucks having ur expensive RC brake so easily. If it was setup right at the factory it shouldn't have happened but u never no, sometimes RCs just break. The Erevo is a great rig but it has some flaws (as do all of them) but the gears are usually not that brittle and should hold up to way more abuse then just that little run...👍👍 dont let it discourage you from this Amazing hobby.
Would love to know where u got all the upgrades from?!? Awesome truck
Mostly Ebay... I got all the part #s at the end of the video... thank you 👍👍
Have you done much running with this set up? It sure looks fantastic- I really love what you have done with this rig. I have never upgraded mine to any aluminum because I was afraid other things would break around it. But your set up looks so good. Thanks for the walk through here.
Thank you... I have done some runnings and its a beast... aluminum upgrades aren't always the best idea for bashing but if u put it in the right places it definitely helps... as far as upgrading, its just what I do, I cant help it.
@@fxrc3086 I agree- the right places matter for sure, and I feel where you decided to place your upgrades is really smart. I’m very curious to see how it holds up. If it works out, I think I’m going to follow your example.
@@RCsBigAir well thank you... if there's anything I can help you with let me know... I love talking RCs
@@fxrc3086 Stay tuned cause I know I will have questions ha ha.
@@RCsBigAir any time my friend
I have a summit and erevo 2.0. I'm building a new ervo 2.0. only parts that fit erevo 2.0 is battery door, battery ventilation. body tower , center diffs but erevo 2 is longer. arms but revo2 are bigger, heavy duty.
Ive wanted to do a summit build for a wile... really awesome looking rigs
How you get it to sit up like that?..I don't want mine all low and shit lol
It's just from the preload on the shocks. Its the only way to kinda adjust the ride hight on the revo
@FX RC Cool appreciate it..Just got one so I'm trying to figure it all out ..Good shit dude👍🏻
@@rickroberts7611 no problem... and thank you 👍👍
Dang I couldn't cross my straps in front like you did... But I ran them straight.. so do you have an email by chance I wanted to show you e revo stuff I did to mine.
I only crossed them because they were a little to long ... fauxnine9@gmail.com
What wheel and tires combo is that?
Its the proline 3.8 badlands on raid black weels with removable hex. Not the 3.8 badlands MX or HP just 3.8 badlands pt# 1178-10
@@fxrc3086 thanks so much killer build
@@joshr7434 any time my friend and thank you its an amazing rig👍👍
Thanks for telling I love those tires and how they are kinda slimmer compared to others 😁💯
Can you add a link to each upgrade
There's a clip at the End of the video with all the part #s... Most of it I got on EBay... good luck my friend👍👍
@@fxrc3086 thank you very much
@@jjhoulton7028 any time my friend... 👍👍
It looks like you've never driven it
When I made this video I hadn't driven yet... I like to build it up and make the first videos when its new and shiny...I have since driven it a few times and its awsome.
2 small of a tire on that rc..it dosent even look right😅