I'm sold. Was looking for a controller that will allow me to have a switch to bypass the sub. thank you :) (I had the Mackie passive big knob and went through the same issues with the switches)
Connect your soundcard master/main stereo outputs to one of the stereo inputs of the controller, taking into consideration the type of output (balanced or unbalanced) you have on your soundcard and its nominal output level. I suggest you also read the user manual for Behringer Control2USB studio controller, to have a full understanding of its features and functionality.
Get a test tone (easiest way). Make sure it's hitting 0 on the audio interface meter. Then make sure the signal going to the Control 2 is also hitting 0.
Hi! I'm owner of usb 2 control, everything is good. I have a question about headphones amplifiers : is it enough power for headphones with 250 - 300 Ohms impedance ? Thanks.
It should be. Just make sure you're sending enough signal to it from your audio interface. There are sensitivity buttons on the back of the Control. Just make sure you have that set to the right setting. Which ever setting gives you the best result.
Yess i use the mono feature to listen often like a plugin to check ! this controller is awesome i use it from 2 years !
I'm sold. Was looking for a controller that will allow me to have a switch to bypass the sub. thank you :) (I had the Mackie passive big knob and went through the same issues with the switches)
Is there a video that explains in detail how the Recording out/Studio out and DAW input/outputs work.?
Hi We are working on a deeper dive video that will address this. Stay tuned
How can i connect sound card to this controller or where do I connect the microphone?
Please help
Connect your soundcard master/main stereo outputs to one of the stereo inputs of the controller, taking into consideration the type of output (balanced or unbalanced) you have on your soundcard and its nominal output level.
I suggest you also read the user manual for Behringer Control2USB studio controller, to have a full understanding of its features and functionality.
You cannot connect a microphone to the Control 2. Im not sure what exactly you're trying to accomplish, so maybe can elaborate so I can help you?
How can I download driver?
Hi how may I set de 0db between interface and control
Get a test tone (easiest way). Make sure it's hitting 0 on the audio interface meter. Then make sure the signal going to the Control 2 is also hitting 0.
Hi! I'm owner of usb 2 control, everything is good. I have a question about headphones amplifiers : is it enough power for headphones with 250 - 300 Ohms impedance ? Thanks.
It should be. Just make sure you're sending enough signal to it from your audio interface. There are sensitivity buttons on the back of the Control. Just make sure you have that set to the right setting. Which ever setting gives you the best result.
@@soundchecktek Thank you!