These are beautiful kits.I've just built the 1/48 Hetzer,and it was a dream to build...No weights,the entire lower hull is metal. Top job on this Sherman 👍
@@ModellingWeekly I have this kit and it's larger 1/35 cousin. Once I have the funds I will purchase the 1/16 m-4 from andys hobby . Your weathering techniques can be applied to each one. That's a big help. Thanks.
Using your video as a guide whilst I make my 1/48 M4A3E8 for the PPP group build. How exactly did you make the mix for the cast texture? Is there a particular ratio? Thanks!!
No particular ratio! Just until it's roughly the consistency of a sort of primer, however you can adjust it until it looks perfect to you 👍 you can also sand it down a bit afterwards if it's too rough
This awesome. I just got back into modeling. I built hundreds as a kid, but never had the patience or money to do them right. I just built two planes and am starting to develop a few basic skills. Being a huge Sherman tank buff, bought this kit. I found your video and really feel more confident that I can at least make a pathetic version of this (but far better than it would have been had I not seen the video)! Thank you!
Looking forward to seeing your build. Pretty sure I have this same kit in stash, along with bunch of Value Gear stowage to put on it. 👍 Best part will be driving back during work for the premier, will be getting paid to enjoy it, win-win
Another enjoyable build from you, MW and a darn good job to boot. Terrific paint scheme contrasting colours, excellent weathering (not too little or too much) resulting in a great reveal. You have come a very long way since starting and a channel to definitely watch.
I'm very glad you're enjoying, and thanks so much for your kind words and overall support :) it genuinely means the world 😊 I look forward to sharing future builds with you!
Thanks for sharing the building skills. After using a air brush to spray the AK paint, what cleaner do you use to clean the air brush? Alcohol? Because the AK cleaner is very expensive in Taiwan, I am looking for other cheaper solution. Thanks
sadly its not flawess. Step3 C5 is junk and broke, had to redrill hole and cut sprew to shape into new glue post. Step 8 bogie assembly would not hold stationary while drying, after 5 hours sitting they fell off, had to use superglue, they wont fall off now 😁 I also wish the front hatches were parts and not just plastic impressions. I wish they allowed front hatches to be open or closed.
It's not a glayseus plate,its said glasius plate,its spelt glacius plate,the metal moulds,ie texture is awful, don't forget those tracks need replacing with metal ones,its such a shame,as this kit is overpriced,you would need to spend another 40 or 50 to make it half decent
I'm not sure what language you're referring to, but it's spelt Glacis, you can check the Oxford English dictionary if you'd like to confirm that. As for the mould texture, what would you do to improve it? Constructive criticism is preferable :) Also, calling a kit "half-decent" is far into the realm of subjectivity. I don't think it's bad at all, especially for a quick mojo build that only stayed on my workbench for 5 days
Yes its spelt glacis plate,my typo,your take on it with the texture is great,as the kit is poor in regard to its price, love your channel bud,look forward to more of your blogs,always clear and well presented
I really hope you enjoy this one guys!
These are beautiful kits.I've just built the 1/48 Hetzer,and it was a dream to build...No weights,the entire lower hull is metal. Top job on this Sherman 👍
They are incredibly well manufactured, for sure. Glad you liked the build!
I paint warhammer 40k and I'm going to start painting their tanks, this channel will help me a lot.
I'm glad you find it helpful mate, means a lot :) Have fun with your future projects!
I dont build very many Armour kits but I will say this is one of the best Armour weathing videos I've ever watched.
That is a huge compliment, thanks so much! I really appreciate it :))
@@ModellingWeekly I have this kit and it's larger 1/35 cousin. Once I have the funds I will purchase the 1/16 m-4 from andys hobby . Your weathering techniques can be applied to each one. That's a big help. Thanks.
@@danwilliams1686 sounds excellent my friend! I'm so glad the weathering tips could help out :)
Came together very well with your painting and weathering choices.
Thanks! Glad you like the result 😊
Using your video as a guide whilst I make my 1/48 M4A3E8 for the PPP group build. How exactly did you make the mix for the cast texture? Is there a particular ratio? Thanks!!
No particular ratio! Just until it's roughly the consistency of a sort of primer, however you can adjust it until it looks perfect to you 👍 you can also sand it down a bit afterwards if it's too rough
Great looking Sherman, thanks for the upload.
Glad you like it! Thanks for watching 😃
Beautiful work on this
This awesome. I just got back into modeling. I built hundreds as a kid, but never had the patience or money to do them right. I just built two planes and am starting to develop a few basic skills. Being a huge Sherman tank buff, bought this kit. I found your video and really feel more confident that I can at least make a pathetic version of this (but far better than it would have been had I not seen the video)! Thank you!
No worries, and thanks for your compliments! I'm sure you'll have a fantastic time building your kit, enjoy! 😄
beautiful build my brother
Thanks very much mate! :D
Fantastic job, loved the tips and entire video. The music was jammin.
Thank you so much!
I finished one of these last year, perhaps one of the most enjoyable builds ever. This fitment is phenomenal
The kit is indeed incredible, I'd agree!
Looking forward to seeing your build. Pretty sure I have this same kit in stash, along with bunch of Value Gear stowage to put on it. 👍
Best part will be driving back during work for the premier, will be getting paid to enjoy it, win-win
Glad you're excited! It's a great kit, I'd definitely break it out if you have one 👍 viewing plans sound good! :D
I have those kit 80 % done your build will encourage me to finish mine
Very glad! Thanks very much for your kind words!
Paint "Fury" on the left side of the main tube. That is a pretty wild movie 🎥
Love the film! One day .. 😉
Another enjoyable build from you, MW and a darn good job to boot. Terrific paint scheme contrasting colours, excellent weathering (not too little or too much) resulting in a great reveal. You have come a very long way since starting and a channel to definitely watch.
I'm very glad you're enjoying, and thanks so much for your kind words and overall support :) it genuinely means the world 😊 I look forward to sharing future builds with you!
@@ModellingWeekly and, I look forward to seeing that notification bell too!
Awesome build. Really inspirational to build my Tamiya 1/48 M10. Nice job as always MW
Thanks! Glad it boosted the inspiration factor for the M10 :)
Nice work and video! And I always think that you have a really nice voice for narrations!
Aw I'm glad youre a fan of the narrations! Really appreciate it mate. And thanks for your kind words :)
Lovely Sherman 👍
Thanks mate! 😃
Thanks for sharing the building skills.
After using a air brush to spray the AK paint, what cleaner do you use to clean the air brush? Alcohol?
Because the AK cleaner is very expensive in Taiwan, I am looking for other cheaper solution.
Thanks
@@changchienchi7220 hi! Any lacquer based cleaner for airbrushes is fine with AK RC :)
Just found your channel the Sherman looks really good I have the king tiger to do nice build well done 👍
I'm glad you're a fan of the build :)) many thanks! Good luck with your tiger 👍👍
Do you have a video with multiple of these on display on the shelf together?
I do have a cabinet where I display all my models, yeah - unfortunately this isn't in a video! I'll work on this for the future 👍
Thanks. I'm looking to get into it and I need to see that final goal and how good does it look. @@ModellingWeekly
Question, can the hatches open and close? Or do they obligatory stay shut in? Because I'm thinking of adding Bolt Action minis to my tank
I believe the commanders hatch can be opened, not sure about the others however
sadly its not flawess. Step3 C5 is junk and broke, had to redrill hole and cut sprew to shape into new glue post. Step 8 bogie assembly would not hold stationary while drying, after 5 hours sitting they fell off, had to use superglue, they wont fall off now 😁 I also wish the front hatches were parts and not just plastic impressions. I wish they allowed front hatches to be open or closed.
Much better!!!
Thanks haha
I'm not keen on the exaggerated paint chipping, especially in this scale. These vehicles were finished with good quality primers and paints.
It's not a glayseus plate,its said glasius plate,its spelt glacius plate,the metal moulds,ie texture is awful, don't forget those tracks need replacing with metal ones,its such a shame,as this kit is overpriced,you would need to spend another 40 or 50 to make it half decent
I'm not sure what language you're referring to, but it's spelt Glacis, you can check the Oxford English dictionary if you'd like to confirm that. As for the mould texture, what would you do to improve it? Constructive criticism is preferable :) Also, calling a kit "half-decent" is far into the realm of subjectivity. I don't think it's bad at all, especially for a quick mojo build that only stayed on my workbench for 5 days
Yes its spelt glacis plate,my typo,your take on it with the texture is great,as the kit is poor in regard to its price, love your channel bud,look forward to more of your blogs,always clear and well presented
@@felipfelop8220 ah, misunderstood what you meant :) my bad. Thanks very much mate