Chisel box build with hidden magnetic latch
ฝัง
- เผยแพร่เมื่อ 5 ก.ย. 2024
- The chisel box has been done for a while now but I finally got the video complete! The box is made of figured maple featuring a floating cedar floor with wenge plugs and accents. The hinges are solid brass. Neodymium magnets have been embedded under both wenge accents to create an invisible magnetic latch. Magnets have also been embedded (from the under side) in each chisel slot that holds each chisel in its place. The finish is three coats of clear shellac and one coat of buffed out wax.
Music has been used by license at: audiojungle.ne...
Subscribe!
/ @dwcwestphal3990
Thanks for watching!
The music aside, the work you do is nothing short of perfection. I truly enjoyed watching you build this absolutely gorgeous box. I see that you have not posted anymore videos since this one. Now, I just found your channel and fell in love with your craftsmanship right away. I go to check all your other stuff in hopes of getting more of a good thing just to find the cupboard was bare. I really really hope that all the negative feedback in regards to the audio selection on your last video didn't sour you on sharing more of your beautiful craftsmanship with us. I think when it comes to the canned B.S. music that is on offer at present, it's sometimes better to just have the natural shop noises playing. The work will speak for its self. I really do hope we see more of your talents very soon. Take care and I will be watching for you to post new content soon. Thank you again for such nice work.
“The music aside”…. 😂😂😂
Great project. Music drove me crazy though.
thanks! yeah, I learned my lesson... The next video will have better audio, I promise! haha
@@dwcwestphal3990 Reduce the volume
No need for music - For me, the sounds of woodworking I think is much better. I watched this wonderful project with sound off. Really amazing work - so good!
The edge on that chisel..... 🤤
Chisels are the jewelry of tools and the most important hand tool you can have... Awesome job!
Lovely build, wonderful craftsmanship. I've had something similar in mind. Think I might do a dovetail box and make the chisel tray so that it is either removable so it can be brought to my bench or rotate with perhaps a wooden hinge around the bottom so that the tray stands up at an angle.
Really inspiring work (I too found the music a distraction, but from reading the comments you've had plenty of that feedback!).
Thanks for uploading & look forward to the next one.
Great work!!!!
Nice box. Lots of inspiration.
Wish the music was complimentary as well. The entire song had 9 infinitely repeating notes
Love the box thank you 🙏. I’m sure you’ll refine your recording techniques as you progress.
Nice box for an expensive set of chisels.
Thanks.
Great work and to those who carry on about the music, just turn it down or off instead of complaining.I'm over the crap with people who miss the point or are just jealous.
One of the most beautiful and joyful .
Yacov Kashi , Israel
Wonderful design ideas. Love the use of Wenge on the flame maple as accents and reinforcers for the joints. The magnets hidden under the Wenge pieces is also very clever. Thanks for the inspiration.
Many years ago my shop teacher was adamant that anyone using the shop should remove all jewellry from their hands and either roll up their sleeves or have short sleeve shirts on. Still makes sense. Very nice project, its timely since I want to make tool boxes. Be safe.
Astonishing craftmanship!!!
Very pretty box and thoroughly enjoyed the quick tour of your chisel handling skill!
I love the tightly fit panel in the lid, and grain direction of the rails to compensate for wood movement. Well done.
You are a true craftman, very impressed by your meticulous attention to detail. Very artistic eye. Please keep sharing your knowledge. Thank you.
Thank you! The next project will have zebrawood and steam bending! It's started now.
Half the time I watch videos like this I just think "oh... that's a cool 200k$ workshop" while this video I thought "wow that is designed really well". Thanks for sharing :)
Nice workmanship
Great looking project. Its got a Greene & Greene vibe to it. Looking forward to seeing more
Haha I like how you have the chisels in the box as your doing the finish work to it
Yes. You can be proud of that beauty! And those veritas pm-v11 chisels are my favorite. Great job 👏🏻
Brilliant. As a beginner, this was really interesting to watch and learn from.
Wow, didn't use a router plane once, All chisel work. I like it a lot.
Your tool storage looks better than anything I have ever built.
Awesome design and build! You are a perfectionist and the music wasn't annoying... I was paying attention to the work on hand not the music :D
Beautiful work, all the attention to details, should have a passion to do like this. thank you for sharring.
A big G'day from Australia mate! What a joy watching this! As a beginner, I lap up these short inspirational pieces. I dare to aspire! lol! 15 to 20 minutes is a good length of time for an episode. Have subscribed and can't wait to see more! Cheerz!
nice looking box. You must like your chisels.
Thanks! I do like my chisels, I plan on keeping them for a lifetime!
Old school carpentry (Rennie Mackintosh (?) ). Contemporary magnets. Love it !
Wow!!! That's one of the most beautiful builds I've seen in quite awhile! Very nicely done.
Thank you very much!
Beautiful work, a pleasure to watch ... The music wasn't my favorite, but that's strictly a subjective thing, the video quality, editing and camera angles were all first rate.
I like every thing you did each step! Very nice, the box is a treasure it's selfish! Thank you.
I do not remember pressing a subscribe button so fast, ever before. Fantastic video! Thank you.
atttrojan thank you! I will be making more videos, as well as some shorter quick videos too.
Beautiful design. True master workmanship
Beautiful box
Worthy of Pride
Well done
Awesome piece.
Thanks for the inspiration. I've been looking for a chisel box design as a basic guide. Got some 1/4 sawn maple boards just waiting for this - (centre stock remnants of baseball bat blanks that I came across) & may work in some roasted maple & walnut rather than wenge. Want to use only hand tools but should be a most satisfying project. Many thanks again for your great video & stunning craftsmanship. Keep 'em coming!
B.
Love the box and the chisels
Oh wow. Absolutely beautiful, PS I didn't mind the music at all. Thank you
Very nice. I also appreciate the Diresta ice pick cameo when you were inserting the magnets.
Very nice box! I think I will watch more of your videos! Thank you.
Great build! Just got some new chisels and added this to my “to build” playlist. Thanks for the video.
Well done.
Well done. Pleasure to watch.
You did such a great job. I'm not in wood working and I enjoyed watching.
Beautiful work and truly artistic use of wood patterns!
A very well planned and executed project. Nice Job.
The hands and mind of a true craftsman! Well done
YES
Wow bro!! That really looks amazing. I love that the chisels helped to make their new home. Fantastic
Very nice work.
Really great job !!!! Perfect!!! I think, you love what you're doing. Best wishes from Germany
Hey!!! A fellow Westphal!! Thank you!
Beautiful craftsmanship and superb videography. I did hit the mute button after a few minutes of that music. It was still delightful to watch.
Beautiful work and workmanship Thank you fir sharing
Beautiful.
I'm inspired to do something about my chisel box now 👍
Do it!! I'd love to see pictures. ...or a video!
Great work!
great job, more inspiration for my chisel box...
Wow. Great build. You have excellent chisel skills.
Hazem Bata thanks!
"extraordinary and genius ability"
Beautiful! You can't take that into the shop now... You scuff it.
Nicely done.
your skills are insane , well done
Sunny sunny Sunny thank you very much!
very nice thanks for sharing the video
Hahaha...love them sad and happy faces at 0:32...good job mate!!!
Beautiful, practical, neat!
Beautiful work, man. Well done.
Thank you!
Nicely done. Beautiful box. I would recommend to get rid of magnets holding the chisels. When you start sharpen them you will know what I’m talking about. Chisels and magnets do not mix well.
Very nice!
Thomas O'Brien thanks! More videos to come!
Great craftsmanship.
U outdid ur self DWC, I like.
We want more!!!
super job. Love the design and the contrasting woods. A pleasure to learn and watch you work. Thanks for sharing. Best wishes
WOW that is a very pretty box !!!!
Beautiful work, Thanks for sharing.
Absolutely gorgeous build. Love the style and creativity that went into this. Just got a set of imperial Narex chisels for Xmas, something similar to this is on my build radar now, thanks and keep up the excellent work!
Красивая работа,красивое видео!
Thank you.
WOW, beautiful box, almost to good for a workshop, thanks foer the video.
Great Job!!!!
very nice work thank you for sharing
a beautiful box and great skill
Beautiful work and amazing craftsmanship. I'd love to see more of your work.
Beautiful little box. I'm sure you are very proud of it. It looks great and I love the small details. Well done. :)
Wow, incredible work. Love the format of the video, too.
That's beautiful work man very impressive
Beautiful
Very Nice Build !!!
wow that looks very nice good job
very nice box. live the wood work too !!!
Just beautiful job ¡
Beautiful work
Really really nice
Querido, sos un Genio!! Hermoso trabajo. Saludos desde Ushuaia, Patagonia Argentina :-)
Nice job!!
Very nice job. Muito bonito trabalho
Thanks for sharing, great work, great details, great finish, all is superb! despite music, you have my like. long life and prosper 🖖
Wow. Beautiful work
Beautiful work!
Gorgeous Box!
I liked it. Music too!
Gorgeous! Inspiring, frustrating, 3,500 miles from my workshop!