============================ Please join our channel to get access to perks: ============================= th-cam.com/channels/J09nVMgevA6uPkKK_VZmzQ.htmljoin ============================ Please connect with us: ============================= facebook.com/SavingBlueSteel instagram.com/mv_blue_steel/ ============================ Fancying More? ============================= You can find other ways to connect with us here: linktr.ee/savingbluesteel =========================== If you'd like to support us: ============================= www.patreon.com/c/SavingBlueSteel Our Amazon Wishlist: amzn.to/3B2YtES Ko-Fi: ko-fi.com/savingbluesteel All Affilate Links: amzn.to/418qqpE PayPal Donations: paypal.me/SavingBlueSteel Our Tees: amzn.to/3Ve77Y5 Our Merch: saving-blue-steel.myspreadshop.co.uk/all
Yes, it can seem quite overwhelming at times. To be honest the support from everyone really gives us a boost when we need it so thank you for following 🙏🏻👍
I'm currently 15 months into the rebuild of my 43ft steel boat and it's never ending...i would be inclined to get the hull done asap and superstructure sorted first job ... to stop leaks and halt further corrosion there is some serious new plating required on this boat .. unless you can get this sorted there is no point doing all the small stuff ... i really hope you have deep pockets for this job... i wish you all the best and i'll be watching good luck 👍
Great video tour. Clearly alot of work to be done and having to do a six hour drive makes it all the more challenging. I eagerly look forward to your next video. Cheers
Good tour of upcoming jobs Shaun, those Penta’s are first class power units, reliable and with a lot of grunt, they love clean oil and filter changes regularly, Rachel has done a grand job. So lots of patching and welding to do but as you say, summer will see more productivity, thanks for taking the time to share progress, good luck!
I wondered if the Welsh bad weather had been the reason for no posts. You certainly do have great determination, I doff my non-existent cap to you looking at the massive project. Really enjoy, but I'm watching this from a blistering 34°c day here in Joburg.
We love the warm weather and flirted with the idea of moving to SA at one stage. We have a few friends that way. The short days and the long drive are slowing us down for the winter, and we can’t plan any outdoor jobs until spring. Plenty to do inside for now - including internal hull prep. Thanks for watching - have a cold beer for us 👍😉🤣
I really admire your enthusiam to undertake such a big project with lots of unknowns. Make sure you check the engines over for any water ingress into places where it shouldn't be before you hit the start button. Cheers ian
Please check the teak for leaks, we had plywood backed teak decking on corten steel decks. If water penetrates and soakes into the ply the steel will be corroding underneath. Would also suggest an isolation transformer early on for safety reasons, all steel yachts should have one fitted for stray currents. Keep the good work up.
Thank you for the advice. Indeed, it was the lack of isolation that caused much of the corrosion and we will attend to this. We will be inspecting the steel under the decks very closely.
Been watching you from the beginning. There's a lot of work to do but you both seem undaunted. Keep nibbling away an you'll get there. Hopefully your channel will continue to go. I know from watching similar TH-cam channels there's lots of people like me out there. Thanks for sharing.
hello, I use google translate. What a huge project you have brought upon yourself. We had a similar ship, a 45 ft superfalcon from 1992. We also carried out a major refit on that. Good luck with your refit, it will ultimately be a beautiful ship with a very nice line.
I mean, I saw the first video and you've made a LOT of progress. No longer seems like a complete lost cause (not to be mean, or anything), so it's quite impressive what you've done so far, but obviously still a way to go. I'm quite impressed so far tbh!
Thank you for the kind words. Yes, we've been woking n her a bit at a time and we're seeing progress. Rachelle's cleaning skills have also worked wonders.
I never realise how bad rust can get. Until I joined the merch. We had rust that was like sheets of plated steel. It was one ship I was one, the foc’ cle head was non existence after we chipped away at it. . Hats off to you both 👍👍. Get a tarpaulin over the whole boat. Then there’s no worries about the Welsh sunny weather 😂
This is a large undertaking. I hope you can get it done and enjoy it. I am sorry to say it looks like it's going to take you a long time to get it done. My rough guess is 18 months of 50 hr per week min. and if you are only working on it part time, I feel it's going to take you 10-15 yrs... I am hoping I am wrong... good luck, I am sure I am not the only that will be prying for you guys..
We daren't estimate either the cost or the time. We do what we can when we can, and try to enjoy the journey as well as the destination. I think we'll have a better idea in 6 months time. Thanks for watching
Hi, I'm enjoying the progress, can I ask, it seems the traveling to WW is so time consuming and costly that wouldn't it pay to have the boat transported to a local farmers land or similar? Would it not pay for itself in the long run and free up so much travel time?
Thank you for watching. The boat is too big to be transported by road. It could be transported by sea but the cost would be extortionate. We have a plan to increase the time spent with the boat. We'll update everyone as this unfolds.
Are you going to rip out everything like they’ve done in these other videos. Or are you trying to keep as much of the furniture there. It does look in pretty good shape 👍👍
We’re going to try to keep as much as possible, but we might have to remove furniture we don’t want to. We’ll need to remove all corrosion one way or another. We may need to get creative
What I don’t understand. If it’s 4mm steel which seems thin to start with. How can the reading be more than 4mm? I would’ve thought 10mm would be the norm for a hull 👍👍
@@taffythegreat1986 10mm is the kind of steel you find on a freshwater barge that never gets lifted. It likely measures greater than 4mm in areas as it’s a single frequency ultrasound so can’t easily differentiate between paint and debris on the internal surface. 4mm is not uncommon for year and length in a pleasure vessel though Van Der Valk tell me they now use 5mm. If the concern is that it has corroded down to 4mm from a greater thickness, this is why I cut some good sections out so I could measure the initial thickness of the good steel.
============================
Please join our channel to get access to perks:
=============================
th-cam.com/channels/J09nVMgevA6uPkKK_VZmzQ.htmljoin
============================
Please connect with us:
=============================
facebook.com/SavingBlueSteel
instagram.com/mv_blue_steel/
============================
Fancying More?
=============================
You can find other ways to connect with us here:
linktr.ee/savingbluesteel
===========================
If you'd like to support us:
=============================
www.patreon.com/c/SavingBlueSteel
Our Amazon Wishlist: amzn.to/3B2YtES
Ko-Fi: ko-fi.com/savingbluesteel
All Affilate Links: amzn.to/418qqpE
PayPal Donations: paypal.me/SavingBlueSteel
Our Tees: amzn.to/3Ve77Y5
Our Merch: saving-blue-steel.myspreadshop.co.uk/all
I have been watching since day one, this is a massive undertaking and I am watching with interest, lots of luck with the project.
Yes, it can seem quite overwhelming at times. To be honest the support from everyone really gives us a boost when we need it so thank you for following 🙏🏻👍
I'm currently 15 months into the rebuild of my 43ft steel boat and it's never ending...i would be inclined to get the hull done asap and superstructure sorted first job ... to stop leaks and halt further corrosion there is some serious new plating required on this boat .. unless you can get this sorted there is no point doing all the small stuff ... i really hope you have deep pockets for this job... i wish you all the best and i'll be watching good luck 👍
Very true words.. maybe better to withdraw all your cash and then set fire to it :(
Thanks for watching. The hull is the major work, we hope to make more significant progress on it very soon.
Great video tour. Clearly alot of work to be done and having to do a six hour drive makes it all the more challenging.
I eagerly look forward to your next video.
Cheers
The drive is a challenge, but we’re hatching a cunning plan we’ll share soon if goes the way we hope😉
Keep going Shaun don't get disheartened its worth it in the end 😎😎🤘🤘
Thank you - the winter slows us down but we keep progressing. 👍
I admire your courage voor al that work you have to do I keep follow your progress keep going 👍👍
Thank you for your encouragement
Good tour of upcoming jobs Shaun, those Penta’s are first class power units, reliable and with a lot of grunt, they love clean oil and filter changes regularly, Rachel has done a grand job. So lots of patching and welding to do but as you say, summer will see more productivity, thanks for taking the time to share progress, good luck!
Thank you for watching - we look forward to prepping the engines for starting 🤞
I wondered if the Welsh bad weather had been the reason for no posts. You certainly do have great determination, I doff my non-existent cap to you looking at the massive project. Really enjoy, but I'm watching this from a blistering 34°c day here in Joburg.
We love the warm weather and flirted with the idea of moving to SA at one stage. We have a few friends that way. The short days and the long drive are slowing us down for the winter, and we can’t plan any outdoor jobs until spring. Plenty to do inside for now - including internal hull prep. Thanks for watching - have a cold beer for us 👍😉🤣
Love the new project. Thanks for making the videos.
Glad you like them! - thanks for watching 👍❤️
Nice tour, its time to get cracking with a grinder and a welder now ..
I really admire your enthusiam to undertake such a big project with lots of unknowns. Make sure you check the engines over for any water ingress into places where it shouldn't be before you hit the start button. Cheers ian
Thanks for the advice Ian - we'll definitely make sure we do that.
Please check the teak for leaks, we had plywood backed teak decking on corten steel decks. If water penetrates and soakes into the ply the steel will be corroding underneath. Would also suggest an isolation transformer early on for safety reasons, all steel yachts should have one fitted for stray currents. Keep the good work up.
Thank you for the advice. Indeed, it was the lack of isolation that caused much of the corrosion and we will attend to this. We will be inspecting the steel under the decks very closely.
Been watching you from the beginning. There's a lot of work to do but you both seem undaunted. Keep nibbling away an you'll get there. Hopefully your channel will continue to go. I know from watching similar TH-cam channels there's lots of people like me out there. Thanks for sharing.
Thanks for watching from the beginning. Nibbling away is exactly what we do and it's surprising how it all starts to add up.
Never thought I would see a place with worse weather than Pittsburgh.
😆
hello, I use google translate. What a huge project you have brought upon yourself. We had a similar ship, a 45 ft superfalcon from 1992. We also carried out a major refit on that. Good luck with your refit, it will ultimately be a beautiful ship with a very nice line.
Thank you 🙏
Nice to see around the boat again. Really looking forward to some steel fabrication/repair.
Me too - I’ll really feel we’re progressing once we start getting stuck into the steel 👍
Lovely engines ,
I mean, I saw the first video and you've made a LOT of progress. No longer seems like a complete lost cause (not to be mean, or anything), so it's quite impressive what you've done so far, but obviously still a way to go. I'm quite impressed so far tbh!
Thank you for the kind words. Yes, we've been woking n her a bit at a time and we're seeing progress. Rachelle's cleaning skills have also worked wonders.
I never realise how bad rust can get. Until I joined the merch. We had rust that was like sheets of plated steel. It was one ship I was one, the foc’ cle head was non existence after we chipped away at it. . Hats off to you both 👍👍. Get a tarpaulin over the whole boat. Then there’s no worries about the Welsh sunny weather 😂
Same here. Some area that just look like a patch of rust become holes when hit with the needle gun.
Have you considered using rust inhibitor chemical to reduce and eliminate future rust and on spots you have already worked on?
We've been using Jenolite to temporarily halt some of the corrosion, and we'll be using it to prep for paint in some areas too.
This is a large undertaking. I hope you can get it done and enjoy it. I am sorry to say it looks like it's going to take you a long time to get it done. My rough guess is 18 months of 50 hr per week min. and if you are only working on it part time, I feel it's going to take you 10-15 yrs... I am hoping I am wrong... good luck, I am sure I am not the only that will be prying for you guys..
Thank you for your prayers. Hopefully we can find more time to work on her in the new year.
Great stuff
Thank you
Stay positive and keep going 🎉🎉🎉
Thank you, and we will!
Lot of work on your hands there fella
You're right there!
Looks like a hell of a lot of work and money before it's back on the water , How long do you think ut would take to get it (ship shape)
We daren't estimate either the cost or the time. We do what we can when we can, and try to enjoy the journey as well as the destination. I think we'll have a better idea in 6 months time. Thanks for watching
Hi, I'm enjoying the progress, can I ask, it seems the traveling to WW is so time consuming and costly that wouldn't it pay to have the boat transported to a local farmers land or similar? Would it not pay for itself in the long run and free up so much travel time?
Thank you for watching. The boat is too big to be transported by road. It could be transported by sea but the cost would be extortionate. We have a plan to increase the time spent with the boat. We'll update everyone as this unfolds.
You've certainly got your work cut out there good luck
We have indeed - thank you, and thanks for watching.
Are you going to rip out everything like they’ve done in these other videos. Or are you trying to keep as much of the furniture there. It does look in pretty good shape 👍👍
We’re going to try to keep as much as possible, but we might have to remove furniture we don’t want to. We’ll need to remove all corrosion one way or another. We may need to get creative
@ that’ll be fun. 😂. Good luck with that 👍👍👍👍
What I don’t understand. If it’s 4mm steel which seems thin to start with. How can the reading be more than 4mm? I would’ve thought 10mm would be the norm for a hull 👍👍
@@taffythegreat1986 10mm is the kind of steel you find on a freshwater barge that never gets lifted. It likely measures greater than 4mm in areas as it’s a single frequency ultrasound so can’t easily differentiate between paint and debris on the internal surface. 4mm is not uncommon for year and length in a pleasure vessel though Van Der Valk tell me they now use 5mm. If the concern is that it has corroded down to 4mm from a greater thickness, this is why I cut some good sections out so I could measure the initial thickness of the good steel.
@
When you look a a tape measure, 5mm looks bugger all, especially 4mm. Yet these steel boats looks really solid. 👍👍
Hats off for all the work. These boats are poorly built. I would build a tent around them out of shrink wrap.
Following! What a project wow. No offense but please more of the boat and less close ups of you lol. Really it’s about the boat!
Thanks for following - my Mum says she'd like to see more close ups of me. I don't know who to listen to now! 😀😉
@@SavingBlueSteel haha! I think you know the answer
Never mind I commented to early in the video.😅
A perfect project to waste tons of money‼️😂
You're not wrong!