Just a suggestion, turn down the music or just get rid of it. I couldn’t hear you sometimes. Looks nice. I just wish more manufacturers made the kubota/takeuchi style door so it’s easy to run open
I will take your feedback into consideration. The reason most companies don't use roll-up doors is due to cab pressurization. The roll up doors do not hold pressurization after a few hundred hours in most cases. Yanmar does give the option for both worlds with this machine. Which is why I like the design. Thank you for watcing.
Roll-up doors are inferior due to long term cabin pressure. The roll-up doors co not do well over the long term. Although, I do agree it is nice to operate with the door up, this machine gives you both options.
Cool looking machine , i like the torsion suspension undercarriage like my 289d but on my 289 that is all greaeable , that windshield washer fluid tank would drive me nuts as i do mostly fine grading with mine
It is all greasable on this machine as well. At first I thought it looked like the washer fluid res was going to be in the way and in view. It is not. But the design allows for the door to be quickly removed.
Nice unit! Would consider it for sure. Let's see it in action! Escape hatch is nice. Ground clearance and tracks ability to clear mud is a huge difference. Overall, I like the build. Dealer support? Lots of questions. I'll find out soon enough.
Yes, impressive machine! I will keep everyone updated on the support. My Yanmar excavator has had excellent support from this dealer (Riverbend Equipment) so far.
@diggindeeperPCG I bought a T66 last year, and I do like it. Wish it had more power and hydraulic flow ( says everyone ). It does exactly what I bought it for and no DEF! However, my wife has decided she would rather have it than the S185 for her horse operation. So I hope to demo one soon. I really don't want to spend 125k, but you know the wife will get her way! Lol, I live near San Antonio, so there is no shortage of equipment dealers.
Looks like a brute of a machine. I work for a yanmar dealer, we’re going to order half a dozen of these and put them to work with the customers and see how they hold up before going full in and selling them.
@@jessiejcupp We are putting this machine through the gauntlet. Take a look at our 2 recent videos. It has incredible power and seems to be holding up just fine!. Our use of this machine is not on a typical construction site. Forestry, mud, snow, heavy loads, etc...
Nice looking machine, wish it had a roll up door. Other than that, it looks like it would get the job done and easier to maintain than any other machine on the market.
I do appreciate the roll up door. I've found the roll up doors don't pressurize, the cab, after a while. The fact this door comes off so easily was a huge selling point for me, because of the times I prefer to run with "the door up". Thank you for watching and commenting. We have another machine we are reviewing and posting, probably today. It is crazy!! Be sure to check back.
Many other changes as well. All of the negatives of the ASV track system have been changed/improved as well. More to come on other machines as well...stay tuned and thank you for watching.
@@diggindeeperPCG no problem I havnt found one that’s perfect I like the controls on asv but its also light in the back for weight just why cant one of the manufacturers get it all perfect
@@Grggeorge That is in fact an interesting question and is technical in nature. This machine, is hopefully just what we needed, due to the fact most machines are too butt heavy for the steep grades we work on. Counterweights are great for increasing the specs on lifting capacity, but make the machine too butt heavy for many applications. I think it is fair to say, more than 1 machine might be needed depending on application...unfortunetly.
I'm not sure what the MSRP is on the unit around the country. But, I will say it will be right in line with the comparable Kubota SVL97-2, depending on your geography. I have a comparison video of the Yanmar vs the Kubota coming out in a few days. There is no comparison, in my opinion. Yanmar put a lot of thought into every little thing.
how much is this machine msrp? we want to get one like this as well but our local dealer is not being transparent about the pricing! Please let me know
I was also concerned about that at first glance. It does not and it is not in the way at all. The design of it on the door is what allows the door to be easily removed as well. Thanks for watching!!
I like the idea of a easily removable door. But I'm still not sure I would ever buy a machine without a roll up door. I can't figure out why a manufacturer would design a machine where the Operator has to look through the door all day. I prefer to have a unhindered vision to the bucket and worksite.
You can tell they merged with ASV. I have a 2023 ASV RT 50 and there’s some things on the inside that look just like it.. I would like to get a hold of that guy about adding a foot throttle to my machine. He seemed very knowledgeable ,It has the Yanmar engine &the guys at ASV are pretty rude, I called ASV in Minnesota direct last week ,he said it couldn’t be done. Seems weird the same horsepower tractor has a foot throttle ,so I should be able to get the pedal and throttle position sensor.
One sitting at CN wood company in woburn Massachusetts for 3 months. They sell komatsu, yanmar equipment. If it was a 75 or 80 would of been sold by now. Smaller properties in my area.
Thats really interesting because I know there are people waiting in line to buy these. They could sell it in a heartbeat if they put in on Machinery Trader. Also, I heard Yanmar will be coming out with a mid sized model but chose to start with the 100. Not sure why, but I may end up with the other one as well 😃. Thanks for watching Ron!!
@@trackhoebucket1317 ok great!! A guy in the comments said his local dealer can't sell the 100 they just got because it's too big for their area. (Mass) Sounds fishy to me, but maybe worth a try on getting a deal?? There is a line waiting for them out here in Colorado. Thanks for watching!
@@trackhoebucket1317 Not sure they want me to say exactly...but, It will be very close to the MSRP of a Kubota 97, in your geography. I would think somewhere right around 100K in your area.
It is comparable in MSRP to the Kubota 97. Comparison video dropping next week. it is 10,800 pounds. Let me check on the ability to add counter weights. Our company does not use counter weights due the grades we traverse. But I will check for you.
Were you able to watch the whole video? The tank does not block visibility and allows the door to be quickly removed. Thank you for watching and commenting!!
Flip up is nice...and with the swing doors offered by Deere, Yanmar and others you can achieve a pressurized cab, which actually works for thousands of hours. The pull up doors lose their pressurization very quickly. Just sharing something I've learned the hard way. 😂
0 seconds ago It is comparable in MSRP to the Kubota 97. Comparison video dropping next week. it is 10,800 pounds. Let me check on the ability to add counter weights. Our company does not use counter weights due the grades we traverse. But I will check for you.
Got it! Depending on the type of work you do, a roll-up door does not keep pressurized in the long term. If you work with dirt and want a quite clean cab all day a door is preferred. Unlike John Deere and others, this model does allow for quick removal if that is preferred. They tried to be the best of both worlds.
I don't have any specifics, but I can tell you a few things. Yamar invented the mini-excavator, John Deere and others are putting Yanmar powerplants in everything that is in their compact categories (mini ex, skids, loaders, etc). They have proven their worthiness to the point other companies have said "screw it" lets just pur Yanmar in our machines. Even if you go with a different company, it has a good chance of being a Yanmar engine. My Yanmar mini ex has had no issues and runs very strong at 1K hours. Hope that helps.
@@diggindeeperPCG You got one thing wrong, they did not invent it. Akio Takeuchi did it in 1971. Takeuchis are also great machines, and they also use Yanmar engines.
I dont think you could stretch your feet forward with the door closed with that washer fluid reservoir at your shins. Im 6'6, id like to get in one and test myself. Does seemlike a well built machine overall.
So every time I need to load or unload something off my truck or trailer with chains, I need to remove the door ahead of time. Otherwise I have no way to exit my machine. Useless to me. Depressing. It was looking so good up to that point. I guess Kubota or Kioti/Hyundai are my only options right now.
@@diggindeeperPCG Nothing great. A PJ 24ft Gooseneck with dovetail ramps and an f350 dually cab and chassis with a 12 foot flatbed. I also have a Miller Trailblazer mounted in a steel cage that I load and unload from time to time. I’m active duty so I work my side business on the weekends. Just trying to make enough to pay for my equipment. Then when I retire I hope to have the expensive stuff paid for. At least for a while so I can really get things happening for me.
@@diggindeeperPCG Where I run into an issue is if need to load or unload a welder, or generator, or any other heavy item. I typically chain those to the Bucket of my backhoe. No issue there since my door is on the side of my backhoe. With a skidsteer and swing out door. Your bucket has to be all the way down or raised above the cab so you can open your door to exit. That makes it impossible when loading/unloading those things from my trailer. Heck, now that I think about it, I couldn’t even move stuff around in my property that’s chained to my bucket either, which I do quite a bit. Most of the time it’s just me so I don’t have anyone outside my skidsteer than can hook or unhook my Chains for me.
@@diggindeeperPCG Actually it's virtually identical to the current ASV VT100, but with a CTL undercarriage and Yanmar paint scheme....engine, dump height, dump angle, pumps, machine length, fuel capacity, etc. any differences are going to be driven by the engineering changes needed to marry up a different U/C.
I've heard that before. We will put it to the test in extreme conditions and see what happens. It does have a 4 yr 4000 hour warranty...so if it breaks, it will be fixed.
So Yanmar is having ASV make their CTLs now instead of Gehl. Well I hope it holds up better than the last piece of junk Yanmar track loader I bought new that blew it's Bosch fuel rail overpressure relief in its first 30 hours of operation. Absolute junk.
Just to clarify the first run of skids and ctls were built by manitou and mustang. T175,t210,220r etc. Yanmar acquired ASV in 2019 and built a brand new manufacturing plant and headquarters in Minnesota. Quite impressive and U.S.A. built equipment with Japanese technology.
First one east side of Mississippi here I’ve had the same machine since December. I’ve had quite a few problems with mine. It’s got 44hrs on it and it’s April 3 today. Let ya know how much it’s been on the job site…not much. Issues with parking brake has got everyone scratching their heads for 3 weeks now…won’t move Mostly tinkering issues like brass grease fittings on undercarriage that have been replaced steel ones that broke off. Loading truck first day on job and was stuck in cab for an hr or so because it threw a code while bucket was dump position over in the bed of a truck. I like the machine …I just should have waited for another year for them to get bugs out.
Just a suggestion, turn down the music or just get rid of it. I couldn’t hear you sometimes. Looks nice. I just wish more manufacturers made the kubota/takeuchi style door so it’s easy to run open
I will take your feedback into consideration. The reason most companies don't use roll-up doors is due to cab pressurization. The roll up doors do not hold pressurization after a few hundred hours in most cases. Yanmar does give the option for both worlds with this machine. Which is why I like the design. Thank you for watcing.
@@diggindeeperPCG the new cats are doing the same as well
That salesman did a great job explaining everything, so glad you have the support;;;;;;;;
Jason at Riverbend is amazing. He is the General Manager of the location for Riverbend Equipment.
I really like the ground clearance. A machine in this class and price range should have a roll up door in my opinion.
Roll-up doors are inferior due to long term cabin pressure. The roll-up doors co not do well over the long term. Although, I do agree it is nice to operate with the door up, this machine gives you both options.
You're video helped me. I've been trying to get my husband to get rid of the cat and go back to asv/yanmar. 🙂
Ha! Glad I could help! Should be putting it to use this next week.
Bad Ass machine brother!
Oh man, that rig looks AWESOME! Great vid man, keep em comin!
Thanks Hunter, we have some seriously good and innovative content coming. Thank you for the support!!
That sure make it easy to keep cleaner
Ride control and self level bucket on right panel
Just curious, did you try out the new John Deere 333P? Looks a lot better for not a substantial difference in price
Cool looking machine , i like the torsion suspension undercarriage like my 289d but on my 289 that is all greaeable , that windshield washer fluid tank would drive me nuts as i do mostly fine grading with mine
It is all greasable on this machine as well. At first I thought it looked like the washer fluid res was going to be in the way and in view. It is not. But the design allows for the door to be quickly removed.
nice review! looking forward to future feedback on it! keep up the good work!
Thank you! Should have reviews out next week on some JD equipment that will come out later this year.
Nice unit! Would consider it for sure. Let's see it in action! Escape hatch is nice. Ground clearance and tracks ability to clear mud is a huge difference. Overall, I like the build. Dealer support? Lots of questions. I'll find out soon enough.
Yes, impressive machine! I will keep everyone updated on the support. My Yanmar excavator has had excellent support from this dealer (Riverbend Equipment) so far.
@diggindeeperPCG I bought a T66 last year, and I do like it. Wish it had more power and hydraulic flow ( says everyone ). It does exactly what I bought it for and no DEF! However, my wife has decided she would rather have it than the S185 for her horse operation. So I hope to demo one soon. I really don't want to spend 125k, but you know the wife will get her way! Lol, I live near San Antonio, so there is no shortage of equipment dealers.
@@Tinfoilhat311 This machine new, should be closer to 100K. For the cost, the foot pounds and horsepower are unbeatable.
SWEET
How to I get the plug out to fill the def?
Bobby’s watching and he’s not making any promises either!! lol
Okay, Bobby the "Dirt Punisher" can be the first to try in Aggressive mode. I'm a little nervous to try anything called Aggressive Mode.
@@diggindeeperPCG 🤣🤣🤣 he says it’ll be alright. lol
Looks like a brute of a machine. I work for a yanmar dealer, we’re going to order half a dozen of these and put them to work with the customers and see how they hold up before going full in and selling them.
Let us know how they like it!
Any update?
@@jessiejcupp We are putting this machine through the gauntlet. Take a look at our 2 recent videos. It has incredible power and seems to be holding up just fine!. Our use of this machine is not on a typical construction site. Forestry, mud, snow, heavy loads, etc...
Nice looking machine, wish it had a roll up door. Other than that, it looks like it would get the job done and easier to maintain than any other machine on the market.
I do appreciate the roll up door. I've found the roll up doors don't pressurize, the cab, after a while. The fact this door comes off so easily was a huge selling point for me, because of the times I prefer to run with "the door up". Thank you for watching and commenting. We have another machine we are reviewing and posting, probably today. It is crazy!! Be sure to check back.
When did Yanmar release these? Got dammm Mandela effect I can’t keep up anymore
They are extremely limited at this time and very recently released. You are not behind. haha!!
ASV skid steer in red with needed improvements that make servicing better.
Many other changes as well. All of the negatives of the ASV track system have been changed/improved as well. More to come on other machines as well...stay tuned and thank you for watching.
Still cheap made steel in rear if you hit something it’s getting a dent or big dent
@@Grggeorge Thanks for watching and commenting!
@@diggindeeperPCG no problem I havnt found one that’s perfect I like the controls on asv but its also light in the back for weight just why cant one of the manufacturers get it all perfect
@@Grggeorge That is in fact an interesting question and is technical in nature. This machine, is hopefully just what we needed, due to the fact most machines are too butt heavy for the steep grades we work on. Counterweights are great for increasing the specs on lifting capacity, but make the machine too butt heavy for many applications. I think it is fair to say, more than 1 machine might be needed depending on application...unfortunetly.
Can’t wait to see it work! How much?
I'm not sure what the MSRP is on the unit around the country. But, I will say it will be right in line with the comparable Kubota SVL97-2, depending on your geography. I have a comparison video of the Yanmar vs the Kubota coming out in a few days. There is no comparison, in my opinion. Yanmar put a lot of thought into every little thing.
@@diggindeeperPCG run the heck out of that thing and let us know how it does
@@laneherrlinger7478 We will, if it will quit snowing!!
No promises on the medium settings...hopefully the machine doesn't narc on us when jason plugs it in for diagnostics! 😂
😂
how much is this machine msrp? we want to get one like this as well but our local dealer is not being transparent about the pricing! Please let me know
I think it should be somewhere around 100-105K.
Yanmar makes some quality equipment I just have the little sub compact tractor but I paid $11k compared to $23k through Deere and holland
Just had the 1000 hour check-up on my Yanmar mini-ex. We operate it in extreme conditions at over 11K ft. It checked out perfectly!!
Move the washer fluid reservoir off the door thats robbing visibility in a crucial part of the window.
It does not rob any part of the view, I was worried as well. The design also allows for the door to be quickly removed and installed.
Does that wiper fluid tank on the door not impair the view of the bucket?
I was also concerned about that at first glance. It does not and it is not in the way at all. The design of it on the door is what allows the door to be easily removed as well. Thanks for watching!!
I like the idea of a easily removable door. But I'm still not sure I would ever buy a machine without a roll up door. I can't figure out why a manufacturer would design a machine where the Operator has to look through the door all day. I prefer to have a unhindered vision to the bucket and worksite.
You can tell they merged with ASV. I have a 2023 ASV RT 50 and there’s some things on the inside that look just like it.. I would like to get a hold of that guy about adding a foot throttle to my machine. He seemed very knowledgeable ,It has the Yanmar engine &the guys at ASV are pretty rude, I called ASV in Minnesota direct last week ,he said it couldn’t be done. Seems weird the same horsepower tractor has a foot throttle ,so I should be able to get the pedal and throttle position sensor.
Why wouldn't these CTL have foot throttles? Huh?? Why leave that off?
@@technicalitems731 not sure, guy at the manufacturer I talked to said their meant to run wide open all the time 🧐
@@technicalitems731does have foot throttle. I guess the ASV does not. That may have been one of the improvements.
correct
One sitting at CN wood company in woburn Massachusetts for 3 months. They sell komatsu, yanmar equipment. If it was a 75 or 80 would of been sold by now. Smaller properties in my area.
Thats really interesting because I know there are people waiting in line to buy these. They could sell it in a heartbeat if they put in on Machinery Trader. Also, I heard Yanmar will be coming out with a mid sized model but chose to start with the 100. Not sure why, but I may end up with the other one as well 😃. Thanks for watching Ron!!
Nice machine, gonna get one!!
Where in the country do you live?
@@diggindeeperPCG Kentucky, Harlan County!
@@trackhoebucket1317 ok great!! A guy in the comments said his local dealer can't sell the 100 they just got because it's too big for their area. (Mass) Sounds fishy to me, but maybe worth a try on getting a deal?? There is a line waiting for them out here in Colorado. Thanks for watching!
@@diggindeeperPCG what was the price of that unit?
@@trackhoebucket1317 Not sure they want me to say exactly...but, It will be very close to the MSRP of a Kubota 97, in your geography. I would think somewhere right around 100K in your area.
What did it cost ? What does it weigh ? can you add extra weights on the back ?
It is comparable in MSRP to the Kubota 97. Comparison video dropping next week. it is 10,800 pounds. Let me check on the ability to add counter weights. Our company does not use counter weights due the grades we traverse. But I will check for you.
No counterweights at this time, per dealer.
The machine looks nice but why put the washer tank on the bottom of the door after telling us about other brands blocking visibility out the door
Were you able to watch the whole video? The tank does not block visibility and allows the door to be quickly removed. Thank you for watching and commenting!!
Would be cool to have a flip up door like an excavator otherwise looks like an awesome machine
Flip up is nice...and with the swing doors offered by Deere, Yanmar and others you can achieve a pressurized cab, which actually works for thousands of hours. The pull up doors lose their pressurization very quickly. Just sharing something I've learned the hard way. 😂
@@diggindeeperPCG you’re definitely right they say the Kubotas with the flip up door are the loudest skid steers on the market
Its basically an ASV with a different track system.
Thanks for watching and commenting
I think the bolts on the undercarriage should be countersunk. I see shit like that get sheered off all the time
Wheres the counter weight?
0 seconds ago
It is comparable in MSRP to the Kubota 97. Comparison video dropping next week. it is 10,800 pounds. Let me check on the ability to add counter weights. Our company does not use counter weights due the grades we traverse. But I will check for you.
Needs a roll up door. Won't buy one without it.
Got it! Depending on the type of work you do, a roll-up door does not keep pressurized in the long term. If you work with dirt and want a quite clean cab all day a door is preferred. Unlike John Deere and others, this model does allow for quick removal if that is preferred. They tried to be the best of both worlds.
Does Yanmar equipment have any issues/failures with the DEF system?
I don't have any specifics, but I can tell you a few things. Yamar invented the mini-excavator, John Deere and others are putting Yanmar powerplants in everything that is in their compact categories (mini ex, skids, loaders, etc). They have proven their worthiness to the point other companies have said "screw it" lets just pur Yanmar in our machines. Even if you go with a different company, it has a good chance of being a Yanmar engine. My Yanmar mini ex has had no issues and runs very strong at 1K hours. Hope that helps.
@@diggindeeperPCG:Thankyou
@@diggindeeperPCG You got one thing wrong, they did not invent it.
Akio Takeuchi did it in 1971.
Takeuchis are also great machines, and they also use Yanmar engines.
@@FPVForLife I'll concede while I conduct more research haha! Thanks for watching!! Appreciate it, a lot!!
@@diggindeeperPCG You're welcome.
I dont think you could stretch your feet forward with the door closed with that washer fluid reservoir at your shins. Im 6'6, id like to get in one and test myself. Does seemlike a well built machine overall.
Did it, done it, most foot/shin room of any skid I would venture to say. Operated the machine yesterday and I'm very impressed.
@@diggindeeperPCG well that's good then, I'll give it a try
@@digginandbuildinwv7012 Let us know what you think.
Nice Machine but I HATE a front door machine dumbest thing ever you cant get out of them unless your loader is all the way down
Whats the cost?
Around 100K
The auxiliary hydraulics need a guard those get damaged all the time and they are expensive parts
The standard are in the arm and take up the space.
What was the price?
around 100K
@@diggindeeperPCG Some one needs to make a model at about 20k. Prices are unaffordable for like 95% of everyone.
@@troyb.4101 Kato is the best I've seen for a new machine that isn't for everyday company abuse. Basic with decent abilities.
Same as asv 100 except the undercarriage
Yes and paint, not a secret
What is the cost, always should be addressed.
The cost is up to the dealers around the country to a certain extent. Dealer handling etc...The machine should be in the range of 100K depending.
So every time I need to load or unload something off my truck or trailer with chains, I need to remove the door ahead of time. Otherwise I have no way to exit my machine. Useless to me. Depressing. It was looking so good up to that point. I guess Kubota or Kioti/Hyundai are my only options right now.
Oh man that stinks! What trailer are you running?
@@diggindeeperPCG Nothing great. A PJ 24 ft gooseneck with dovetail ramps. I also have a 12 ft flatbed dually as well.
@@diggindeeperPCG Nothing great. A PJ 24ft Gooseneck with dovetail ramps and an f350 dually cab and chassis with a 12 foot flatbed. I also have a Miller Trailblazer mounted in a steel cage that I load and unload from time to time. I’m active duty so I work my side business on the weekends. Just trying to make enough to pay for my equipment. Then when I retire I hope to have the expensive stuff paid for. At least for a while so I can really get things happening for me.
@@survivalguyfyi5718 Sounds like a good plan to me!! With a 24 foot trailer, why does the bucket need to be raised for hauling?
@@diggindeeperPCG Where I run into an issue is if need to load or unload a welder, or generator, or any other heavy item. I typically chain those to the Bucket of my backhoe. No issue there since my door is on the side of my backhoe. With a skidsteer and swing out door. Your bucket has to be all the way down or raised above the cab so you can open your door to exit. That makes it impossible when loading/unloading those things from my trailer. Heck, now that I think about it, I couldn’t even move stuff around in my property that’s chained to my bucket either, which I do quite a bit. Most of the time it’s just me so I don’t have anyone outside my skidsteer than can hook or unhook my Chains for me.
I sent you an email about this machine. Let me know if you don't see it :)
thay are a rebadged ASV vt 100
Not quite...Many enhancements since Yanmar bought ASV and moved to MN.
@@diggindeeperPCG Actually it's virtually identical to the current ASV VT100, but with a CTL undercarriage and Yanmar paint scheme....engine, dump height, dump angle, pumps, machine length, fuel capacity, etc. any differences are going to be driven by the engineering changes needed to marry up a different U/C.
@@snorelacks7069 Thank you for watchng and commenting!!
A red ASV with conventional tracks mounted on a flimsey suspension? C'mon man...
I've heard that before. We will put it to the test in extreme conditions and see what happens. It does have a 4 yr 4000 hour warranty...so if it breaks, it will be fixed.
The only thing I, got out the video is Jason saying umm umm the hole time!
I'll be sure to let him know!
So Yanmar is having ASV make their CTLs now instead of Gehl. Well I hope it holds up better than the last piece of junk Yanmar track loader I bought new that blew it's Bosch fuel rail overpressure relief in its first 30 hours of operation. Absolute junk.
Interesting. Thanks for watching!!
Just to clarify the first run of skids and ctls were built by manitou and mustang. T175,t210,220r etc. Yanmar acquired ASV in 2019 and built a brand new manufacturing plant and headquarters in Minnesota. Quite impressive and U.S.A. built equipment with Japanese technology.
Could have not play that stupid so called music
We will change up the style for you on the next video. Thanks for watching Ron!!
LMFAO, people thinking just like I do!
Looks like another piece of junk. You are going to hate that entry door!
Interesting...Thanks for watching
Ho hum , nothing mentioned about the controls guessing they are electric over Hydraulic bloody useless
Yes, this allows for some newer technology that is very helpful for some companies. I do understand not everyone is a fan (including one of my guys).
I also have a Yanmar that has had no issues 1000 hours. Money maker! VIO55
Solid machines!!
First one east side of Mississippi here
I’ve had the same machine since December. I’ve had quite a few problems with mine. It’s got 44hrs on it and it’s April 3 today. Let ya know how much it’s been on the job site…not much. Issues with parking brake has got everyone scratching their heads for 3 weeks now…won’t move Mostly tinkering issues like brass grease fittings on undercarriage that have been replaced steel ones that broke off. Loading truck first day on job and was stuck in cab for an hr or so because it threw a code while bucket was dump position over in the bed of a truck. I like the machine …I just should have waited for another year for them to get bugs out.
@@littleclod Oh boy! I will let you know what we find on ours.