FIVE TECHNIQUES WITH LATHES THAT ARE NOT TEACHED IN SCHOOL
ฝัง
- เผยแพร่เมื่อ 5 ก.พ. 2025
- This video shows several lathe techniques that are not taught in school, the reason it is not taught is because this method has been forgotten with the advent of milling machines.
Keren parah sih ini ilmu nya , pekerjaan yg seharusnya di kerjakan dengan mesin miling di garap abis di mesin bubut .
Terimakasih saudaraku ❣️
Pelajaran di sekolah kejuruan mengenai pengerjaan di mesin bubut biasanya hanya standar saja, untuk hal out of the box dialami jika sudah masuk kedalam dunia kerja atau dunia usaha 😊😊
Everyone needs to understand that this is just machining and NOT Precision Machining. Engineering happens with Precision machining. But credit where its due. The guy has great ideas.
Once in our formula student team, an axle in our lathe broke. I used the milling machine to turn a new axle. It worked very well and the tool was very stable, giving great surface finish.
Yeah, like welding current possibly passing through the spindle bearings. I especially enjoyed the weld tacks left on the chuck jaws. Good video for innovative methods to destroy machinery! This is a shop where nothing matters but getting the job out the door; never mind the machines may not work for the next job. I got "teached" a lot!
لذت بخش هست کارهای شما🙌 انشاالله سلامت وپایدارباشید🤲🙏❤️❤️❤️🌹
Terimakasih banyak saudaraku ♥️
Vamos arriba hermano Messin excelente como siempre lo tuyo y te envío un fuerte Abrazo para ti y todos los hermanos Indoneses José desde Florida Uruguay ❤❤
Terimakasih banyak saudaraku Uruguay ♥️
@@Yantoo ❤❤
Do you know which country this is? I was thinking the Philippines. 😊
Indonesia
I have never thought of doing this, thank you so much.....cheers from the US, Paul
Thanks Paul 💝
Lo que no te enseñaron en la escuela ,es que no hay que soldar arriba del torno !!
Тем более что второй провод подсоединн не к детали а к станку,ток проходит через подшипники а это ОЧЕНЬ ПЛОХО.
الحل تلحم بوربرين على محور الشغله ثم نوصيل السلك الثاني
@@mihailnavorodckij правильно сказано а противопожарную безопасность и технику безопасности при работе на станках
A pleasure to watch your skills at work 👍🇬🇧
Thanks brother ♥️
Luar biasa. Mantap..
Maturnuwun mas e
Mantap kerja semangat ceedas 💪
Excellent job!
Thanks brother 🙏 💙 ❤️
Teacher Yanto. 🤗
Best regards 🙋♂️🇩🇪
😁😁🙏🙏
Assisti até a solda no torno, isso acaba com os rolamentos e respingos no barramento.
Mesin multifungsi apa kreatif nya yg tinggi, salut ❤
How do you guys drill without spot drilling or center drilling first is beyond me. You're even doing it on a round piece. I would do the same even on a mill and a square piece, the drill wanders like crazy if I don't spot drill first.
maybe they are using a split point bit to do the first hole, I will have to go back and look close...
watched the second hole start, looks like a split point that has been resharpened, but they do not show for long....cheers from Florida, Paul
👍 nice work my friend!
He is quite the master machinist. His techniques are very interesting to watch and learn!
Hes teaching dangerous shit. Not everyone know how to properly weld some dummy is gonna kill himself
Sukses selalu mas Yanto
Aamiin mas e
Ngakal ngulik ngakel ya mas Yanto 👍
Cool work thanks 👍
♥️♥️🙏
Brother Yanto, you never fail to make my day. Watching you manipulate that lathe like it is an extension of your hands. The milling segments alone are worth their weight in gold. Many of us have a lathe but don't have a mill. You regularly demonstrate that milling on the lathe is far more than a concept.
All is not perfect though.. In my mind when welding on the lathe I would do everything and anything possible to avoid connecting the ground electrode to my spindle. Seriously, there were other, more direct options than connecting it to the rear end of your spindle. I would do anything possible to avoid having welding currents passing through or getting near my spindle bearings.
My other, knit-picky complaint is the segment at the cutoff wheel. You just finished machining a hydraulic fitting on the lathe. You then took it over to your abrasive cutoff wheel to separate the waste end. Problem is, the cut off section was the hydraulic fitting that you just machined. When the wheel cut through the waste the finished part fell to the concrete below. Yanto, come on buddy, there should have been a wood or other soft surface below that cutoff.......... Capice?
I still love ya!
Wakodahatchee Chris
El mérito que es joven y no se le ve limitaciones corta suelda tornea de varias formas, pero si. El uso de la técnica yenis sin protección, saludos
Electricity always takes path of least resistance, the bar connected to chuck will have real good contact so as long as arc is struck on round bar and not flat bar in tool-post there won't be any problems (contact between tool-post and bar may not be as good?)
I would probably make some sort of plug to get better contact on lathe spindle though if I were to ever contemplate welding parts like that, 'throwing' ground lead into spindle will almost certainly cause arcing inside spindle bore
@1crazypj "*Electricity always takes path of least resistance*" This is possibly the most misquoted or misunderstood Electrical Law on the planet. Ohm's and Kirchhoff's circuit laws are much more specific and far more precise. I'm not here to debate this but.... If I have stock to be welded being held in my Lathe chuck, I would rather Earth Clamp to one of the chuck's easily replaceable jaws instead of the back end of my beloved spindle. ..Capice?
Great job
😊Very good show treat-ment a mechanic cutting😊😊😊
He is the best person on a 4 jaw chuck that I've ever seen !!
wery fast and good treecs 🤗🤗👌👌👍👍 i am turner
Great job mate
Thanks brother ♥️
Respect to you from Bharat.
Nice ur work.👍👍 milling and drill work all include only lathe machine. Depending on ur lathe attachment iam also lathe cnc machine worker. I also some vedeose put some different machine 👍👍
No dude this is damgerous af
Top markotop tehnik nya
Teached = Taught
Keren sekali sih, cuman waktu nya jadi lama
thank you for the video sir
ماشأ الله تبارك الله
مبدع بي ابسط الامكانيات
اهنيك واتمنى لك التوفيق
Aamiin.. terimakasih saudaraku ♥️
Nice video, thank you :)
Гений чувак. Просто гений. Красавец!
Anda memang ahlinya mungkin anda jugabisa bikin bor fris/mesin Milling sendiri 👍👍👍
Kelasszzz abg nyaa 🫡
No dial indicator so its within. 005 nice work
!
Отличная магнитная стойка и индикатор хороший а главное точный,лучше чем мелом проверять радиальное биение
열악한 조건속에서
선반 하나로
밀링
레디얼
슬로터
모든 작업을 하는당신께
경의를 표합니다.
❤❤❤❤❤❤❤❤❤
Kreative tanpa batas mantap
WELDING on a lathe like that is a very good way to kill the bearings in the head stock
FU...nobody likes a smartass...maybe that was their intention!
Why..they are not close to heat ?
Bearings have tolerances, with the ground going through the bearings this will cause arching in the bearings themselves and damage the rollers/races. Heat isn't the direct issue..
You are amazing
Thanks brother ♥️
Excellent!!!
редко использую 4-х кулачковый патрон и каждый раз это мучение выставить деталь)) Приспособление для пробивки шпоночного паза вообще класс!
Такой метод обдирки не сработает, если заготовка была из углеродистой стали и ее отрезали газовым резаком. Можно так сделать только тогда, когда эта сталь - пластилин
Сталь три!
Insert into the drill press to drill accurately and effectively
You are right. I never learnt that in school.😂
Keren bang tekniknya❤❤
Maturnuwun pak Utomo
muantap bang..
There is a reason they don’t teach this in schools.. it’s a GREAT example of what not to do… 43 years in the trade and if you did these in my shop you wouldn’t last long…I’d fire you
Mantap bos
Por favor pra facear peça aproxime mais da placa, cê tá querendo levar peça na cara?😂😂😂
Love the wire indicator,
Boa tarde irmão quanto custa um torno Mecânico deste como faço para comprar um?
Anda bisa memesan di eBay..
You'll be lucky to find a lathe or other machine tool in a school these days! A craft knife is considered dangerous. Even in colleges and universities access to machine tools is restricted. Back in the day...........I was 13 when we were using lathes, mills and shapers. We were also allly casting. Everyone complains about the lack of engineers but it's the manby panty health and safety culture holding everything back. What happened to common sense? Rant over!!!
Spot on. Bloody H&S morons keeping themselves in a shite job because that is all they can do.
It need the skillful hands to ensure the safety😮😮
Catched, caught
Teached, taught
Watched, latched, batched, hatched, patched, matched... OK
Just having fun
😎😎
Thanks brother ♥️
@@Yantoo Syntax can be a quirky thing when applied between languages. Syntax is largely cultural, what is proper with one culture can seem odd when applied to the language of another. However, by listening with an attentive ear, meaning is generally clear. Catched and teached seems to me, should be perfectly acceptable.
Example: "I was sure the locking mechanism was properly catched."
I'd get points taken off in English class for that one.
Be well my friend.
😎😎
Machine Mechanic has some serious machinist's skills.
😎😎
Isso ai ..segurança ?...ahhh depois a gente vê isso ...quer dizer se não perder a visão com essa lixadeira 😂😂😂😂...famoso pé de ferro 😂
Bos mau tanya kalau buat chuck untuk d pasang di mesing jahit habis berapa ya....? Buat custom pancing
Chuck bubut beli bang, nanti setelah chuck bubut beli buatkan poros di bengkel bubut
Tutor struk up askruk bang
Lathe is the mother of all Machine tools.
Ini pekerjaan untuk konten
Kenyaan dalam bengkel bisa.dikerjakan dg.mesin lain
I'm not easily impressed, but this young man has impressed me with what he is working with and quality of work he can achieve. Great job!
Dont be this is extremely dangerous
@@ESP-Collectibles you know, I own a machine shop. Do you?
@@donniceblakely1075 sure do. I know more than you.
@@ESP-Collectibles well , then I suppose the agreement is over. 😆
creo que si tubuera yn taladro-fresador no pasaria este suplicio..
On number 2, why didn’t you just part it off instead of using a cut off saw. Still good though!!!
We have modern cnc machines and we learn how to use them right. We don’t need these tricks
Wow excelente tornero, una máquina para múltiples operaciones, un fuerte abrazo desde Perú y bendiciones de nuestro Señor.
Terimakasih banyak saudaraku Peru ♥️
Братан був би ближче подарував би тобі два індикатора а так привіт з украіни мирного неба і божоі благодаті ти супер
Ничего необычного, токаный станок он в умелых руках весь стоночный парк заменяет.
а зачем так выё..... живатся, может всё таки фрезерный приобрести - будет намного быстрей и проще
Ладно, не спорю , а про 3х кулачковый самоцентрирущийся патрон ни кто не слышал? Нет?
Никто пишется вместе.
патрон то ладно, а вот зачем он ножовкой допиливает или отрезным кру́гом так и не понял
I’ve actually used a 4 jaw self centering chuck but no need for 4 jaw when turning round bar 👍🏴
@@terrybatterton3078сам то хоть понял чё написал
Зачем здесь нужен 3-хкулачковый?
This guy does things that I would NEVER EVER even consider doing. NOt only dangerous, but ruin his lathe. He does these things out of necessity because he does not have a mill. Maybe he should build himself a mill. It is quite possible to build your own mill, it's done all th etime. If he spent the time build a mill, he woujld save far more time in his operations.
Why 4-jaw? This job can be done more simply and accurately with 3-jaw.
Every single one of these techniques are in fact taught in precision machining vocational schools
Edit: oh god. I retract my statement
Hello bro, how can i contact you?
nice
Taught in schools
Ijin tanya. Alamatnya dimana bang. Pengin main
bengkel bubut bang.
@@irwansyahkdw4446 aku purworejo mas.
Не понимаю тех кто большую часть своей жизни крутит кулачки на четырёх кулачковым патроне, чтобы зажать круглую деталь.
Друг, купи трёхкулачковый патрон, больше толку будет.
I just knew i was in for an absolute ride when i saw him weld a fucking plate to his stock and start indicating in a drill. There is absolutely a reason why most of this crap isnt taught. Just use a mill.
😂 right? This is dangerous af some idiot is gonna tack mild steel to carbon and BOOM
Like you.what nationality.🤝
I wish 😪 😢i had been taught this in school 🏫 when 🤔 😩 i wanted to learn about being a machinist, but my teacher was an ass.
я считаю сильно заморочисто, только в редких случаях такое применять, если это колым который стоит того, а так нет смысла.
Evidently this guy is overseas. Has a lathe and other equipment but can’t afford PPE’s that’s personal protection equipment. No face shield, no safety shoes and I bet no ear plugs when grinding and welding. He’s young now. All it will take is one piece of metal flung out of the lathe chuck and bye bye eye sight. With his equipment there is no reason not to afford it.
Yup. This is dangerous af
This comment should be at the top of the others because students are taught as SAFTTY ALWAYS COME FIRST
Whyy do these guys do everything on the floor? Haven't they heard of a workbench?
Teached lol, the word is taught dear boy.
Que pobreza, no tiene una mesa de trabajo ni una perforadora de mesa, tiene que trabajar en el suelo y sin zapatos
Хорошо что этому не учат в школе. Каждому делу свой инструмент.
Что творит босоногий, просто Кулибин с токарным станком, 90% токарей половины не умеют чего он делает :)
@@Сергей-л5з3ъ Когда припрёт и нужно будет сделать - возьмёшь и сделаешь, только 80% нынешних токарей вообще не в курсе, что на токарном можно СДЕЛАТЬ ВСЁ :)
Your material stick out is way to long right from the get go .
They taught us, not teached.
Well clearly someone didn't go to school at all LoL
Ma sha allah ❤️
Зажим массы через весь шпиндель, зачем?
Never seen anyone face off a component like that
Not taught in schools because there are other, better ways of performing these kinds of tasks. The term "tool abuse" comes to mind. Welding on a lathe! Are you bloody mad? The spatter from that arc welding can ruin your lathe bed. Leave those techniques where they belong. Don't abuse the tools.
"Teached" is also not taught in schools .
The first thing he needs to build is a workbench. Then he needs to build some shoes.
Maybe some English grammar it’s taught not teached