How To Fix Nexus 6p Bootloop | Stuck on Google Logo 2017
ฝัง
- เผยแพร่เมื่อ 15 ต.ค. 2024
- Install ADB goo.gl/zyMHKo
Download Nexus 6p N2G48B factory image from here goo.gl/7DEkfZ
Download N2G48B_4Cores.img here goo.gl/XX753G
Extra step might get your phone into a permanent bootloop, do it on your own risk
Extras:
Download twpr.img recovery here goo.gl/ScgftS
Download EX4_1_1_4Cores.zip here goo.gl/fEV7k5
Android Flle Transfer www.android.co...
P.S. I saw people who can't even open a Recovery Mode, this probably means your phone is dead for good/needs hardware fix
P.P.S. There’s an Oreo patch available now here drive.google.c..., I haven’t tried it myself and not sure for which versions of Oreo it would work. If you attempt to try it - there’s no need to going through Steps 4 and 5 then. And in Step 6 use the file mentioned above instead. If this patch did work for you - feel free to leave a comment with a version of Oreo you had
P.P.P.S. I DON'T answer to comments anymore. Assisted quite a few people personally in comments and I think you going through the description and full comment list will clear few things up for you
Hi, I'm stuck on the last part of Step 5. I've entered cd Downloads/ cd angler-2ng48b and I'm trying to run flash-all.bat because I'm using Windows but what command do I use before flash-all.bat? The sh won't work. Thanks
Hi, In step 5 you just download that archive and run flash-all.bat, just try to double click flash-all.bat, it should work on Windows
I double-clicked on flash-all.bat and it pops up . Am I supposed to do anything else right now or just wait? Thanks
Your phone should be in a bootloader screen (Step 2) and connected to your computer via USB cable, then run flash-all.bat
Yes I did that but it didn't work. I downloaded that archive and ran flash-all.bat while my phone was in bootloader screen and this is what it showed:
error: cannot load 'bootloader-angler-angler-03.68.img'
rebooting into bootloader...
OKAY [ 0.015s]
finished. total time: 0.016s
error: cannot load 'radio-angler-angler-03.81.img'
rebooting into bootloader...
OKAY [ 0.006s]
finished. total time: 0.007s
W/ (19448): Unable to open 'image-angler-n2g48b.zip': No such file or directory
error: failed to open zip file 'image-angler-n2g48b.zip': I/O Error
Press any key to exit...
Try to move all files from image-angler... directory (there will be files like recovery.img, vendor.img etc, it's inside the archive) to the higher level directory where you have flash-all.bat and run it again
I can't get into the recovery mode, only the bootloader. The recovery mode puts me in another loop.
Hi All. If anyone is still using a Nexus 6P phone, or utilising the device as a secondary/backup type, let the device start and allow it to boot loop. This will be an extended period of time and what you can do (and in this scenario) allow the boot looping to cause the phone's remaining battery charge to drain. The Google logo will keep flashing intermittently. After this time, you will notice the phone unable to boot loop because the phone's battery charge is virtually dead. You can tell this by trying to press the Power button, but the phone's red light icon (in the left-hand corner) flashes to signal that the battery is dead. Make sure the red led light is flashing. So now, you need to plug the phone charger to your power socket and to the device. Don't press the Power button - just plug the charger to the device and let it boot up. You will again see the Google logo and again, it will start the bootloop again. However, after a couple of minutes, the device will actually bypass the bootloop, allowing you to finally again see the Android animation, and you will be able to login into the device as per normally. The first time this took place, the device functioned normally for approximately one week, before suddenly the bootloop yet again returned suddenly. But during this period, the device was drained from all power on a couple of occasions, which it restarted normally. And the device was also recharged several times also without any issues. A second attempt was made to recover the device from suffering another bootloop spell so the battery was yet again drained of its charge - and yet this time, the decision was made to "flash" the device with the factory image (the same as the last firmware update of the device which was in December 2018 which is also the most latest update for Angler 6P) which made all user data deleted. So this time, the phone is entirely as though it came from factory and now the device is being charged back up again like its functioning normally. N.B.: the device is inevitably going to incurable from this hardware issue, so it's honestly best to purchase an entirely new device such as the more recent Pixel 2 XL.
***** For anybody using a OSX-based OS, install ADB and Fastboot together easier by installing HOMEBREW (brew.sh). Once you install it, just go into the Terminal screen and enter: "brew install android-platform-tools" (without the quote marks). This will install the latest ADB and Fastboot together for your Mac. And just let it completely install itself. The whole Homebrew and ADB+FASTBOOT installation is entirely via the Terminal window. Don't close it UNTIL it installs everything which will take 15 minutes or so. *****
there is no Flash-all.bat file in downloaded -> Nexus 6p N2G48B factory image
I got my phone working with the hairdryer heating, unlocked phone, installed the image, patched but still looping. Any help? Why isn't it working for me? Did I miss anything
Im already do that but 3rd step I cannot set that setting because my phone is stuck on logo can’t boot up . So what i need to do?
i am good with ADB it checks out okay but when i give command of fastboot it says no command. kindly walk me through t
Hi. My android version is 8.1.0 (OPM7.181205.001, Dec 2018) . where can i get the 4cores image of it
Me too..need patch image of 4 core for this version.
This isn't working !!! I'm still in bootloop I even loaded up by heating and I saw that I was on the Android that I flashed, but I still can't get rid of bootloop
hi, i downloaded the adb but cant see the operations window. get a message "adb server has started" phone connected and loop is still on. Pls help
bro All ok after doing all steps but mobile running tooo much slow any fix? plz tell
Hello, thanks for the great video! I am having trouble with step 3: the hot air step. I have not been able to get the phone to boot when the heat is applied. I left it under very high temperature conditions for close to a half hour and came back to the device still displaying the google logo. Any tips/ideas about where the temperature sensor is located, or if there is another step that a user will need to preform on the device to get the boot to start?
Hmm I followed all the steps, but Nexus 6P keeps saying "Your device can't be checked for corruption. Please lock the bootloader"
Hi, can you help me? I tried to open my phone by using the hair-dryer like you said but I didn't work. Do you have any other ways or i just use the hair-dryer for hours in hopeless T.T
My nexus 6P doesnt want to go into the bootloader, sometimes it shows the google logo once, then a charging icon, then just a black screen.. Its been in the charger for an hour so I guess it should have some charge.
Sometimes is the start button that is stuck and keeps pressing
i'm stuck verifying my factory image version , coz mi cellphone isn't available to enter on that display
didn't work for some reason. My phone had 8.1 operating system, i have reflashed as per instructions to get it to 7.1, cores are disabled, phone became slow, but still shuts dowb after a while after i take it out of the fridge (( Probably some other problem then, not just the cores, thanks for the tutorial
thanks for this but I've got a problem my phone can't connect to the computer unless i change the settings on my phone..i don't know how I'm gonna go about this.. any help??
i'm stuck on the same thing right now.
Flashed the file but if kept boot looping, tried again and again. after a while it started flashing a red LED when clicking the power button or charging. Won’t even go to recovery anymore
Zayd Khan is OEM unlocked? If so try following the same steps again with same imgs provided in description.
hey man i have serious problem with nexus 6p , cause of that google bootloop plz help me and reply me for the contact i'm in serious tention so plz .... my android version 8.1 oreo
have you tried heating up yout phone with a hair drier while on the bootlopp? it worked for me
@@Queeshandle yeah i did bit it didn't work for me
What about Oreo 8.1.0 update..how to fix boot loop or 4core patch.
The heat up method actually worked! That impressed me. Does that work for every android and has the same issue?
If you are trying to boot by overheating the CPU, another option is to let the battery get as close to dead as possible by letting the bootloop run the battery out. When the battery gets close to dead, it will try to boot. As soon as you see it try to boot, plug the power back in. That will get you booted once, so you can enable debugger mode and OEM unlocking.
Thank you for this suggestion ! I let the phone run the loop. I forgot about it and then I checked the phone and it was really hot. I held power and volume button down and then the phone started normal again. So far so good.
Can this be confirmed and explain a little better to help me out please
Hey, my nexus started with the bootloop in android 8.1! Can you tell me the archive image to download and recovery my phone?? I tried a lot with other archives, but doesn't work! When i go to "fastboot flash boot (name of the archive)" the messenger that appears is "error: Cannot load (name of the archive)".
Have you tried following each step? But make sure not to go for extra one
Yeah, I followed all of it, one by one. But my android is 8.1, so, doesn't have the archive .img yet. I think that my phone is over. If you can help with the archive of 8.1 version, helps me a looooot
But that's why I put a step explaining how to flash to Nougat, so that .img file works
Henrique Machado 8.1 is not working as the image fix is for nougat. Try flashing with N2B48G img.
Hi, I am stuck on the step 5 as well. When I tried to run sh flash-all.sh this is what I get. Can you please help me understand how to get past it.
target reported max download size of 494927872 bytes
sending 'bootloader' (3544 KB)...
OKAY [ 0.094s]
writing 'bootloader'...
OKAY [ 0.208s]
finished. total time: 0.301s
rebooting into bootloader...
OKAY [ 0.022s]
finished. total time: 0.023s
target reported max download size of 494927872 bytes
sending 'radio' (48728 KB)...
OKAY [ 1.078s]
writing 'radio'...
OKAY [ 2.166s]
finished. total time: 3.244s
rebooting into bootloader...
OKAY [ 0.022s]
finished. total time: 0.022s
target reported max download size of 494927872 bytes
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
I have tried this as well.
If it still doesn't work - then do this
1. Navigate in command line terminal to the directory where you have recovery.img, vendor.img etc
2. Run fastboot flash recovery recovery.img
3. Run fastboot flash system system.img
4. Run fastboot flash vendor vendor.img
5. Run fastboot flash boot boot.img
6. Run fastboot reboot-bootloader
This gets my phone into a bootloop where it loads the google android and then a error com.android.phone stopped working appears.
Check my answer to Mona Le where I explain how to flash each file manually. This will solve the issue
I tried that and that loads the google android and then a error com.android.phone stopped working appears and it does that repeatedly.
Hm, you mean commands themselves? Or after completing with installing patch from Step6?
After completing step 6. I flash each file manually and then that happens.
i dont know my android version my device didnt run to recovery mode what to do knowwhich factory image should i upload
I followed all the steps, even the twrp.img as well, now my phone is out of boot loop, but now it stuck at Google Logo with an unlocked icon and not moving further from there, Any idea on what are the possible fixes here, Appreciate your reply.
Praveen Kumar mine was like that for a while then completely bricked, only a red LED flash when charging.
Mine is working absolutely fine, currently replying from my Nexus 6p, follow the steps one more time with same images provided above that should fix it.
in step 4 i put to recovery mode but the cellphone just stay in google logo and restart
Thankyou Its really effective. I just followed step number 3 which is to blower. Promise if it heats up it will open automatically and launch again. Now im using my nexus 6p again after how many weeks of bootloop. Just wait until it heaaaats up. reaaally reaally hot.
Thanks a lot. it worked for me. I have seen my Nexus 6P in ready state approximately after 18 months. Initially I was trying to fix it without disabling 4 Cores but its seems there's NO Fix unless replace its mother board.
fastboot flashing unlock
-bash: fastboot: command not found
any help brother?
I cant even download the ADB program. I follow the link and it tells me to download the sdk tools zip file only which i did. Then it says to start sdk manager. I dont have an sdk manager file in the folder that I downloaded. Im stuck and not sure what to do. Any help would be appreciated.
Inside bin directory there's an sdkmanager executable
I just checked in the bin directory and there is an sdkmanager batch file not an executable. I even tried clicking on it and nothing happens.
If your bat file not opening on double click - check screenshot here superuser.com/a/98541 it should have Run: normal window probably
Ok so I created a shortcut and it does have run : normal window. But still when i double click on it I can see a small window appear for a split second then disappear.
Same thing happens for me
Hi where did you do it ?
5:20
Prompt ?
hi, thanks for the video
i have problem after completing step 6, my device keep rebooting and says "can't load android system. your data maybe corrupt..." is there any solution for this issue? thank you
Hi, I think I had the same issue. First question: did you flash Nougat version? If not - then did you use Oreo patch? Second: can you still open Recovery Mode? Third: if you can get to Recovery Mode - check what Android version you have installed
@@MyHexaville Hi, I've the same issue. And yes, I flashed the Nougat version as shown. Is there a fix for this?
when I type the *fastboot devices* I get the same result as yours, but for the *fastboot flashing unlock* I get a longer result but not "the device is unlocked". how can I solve it ?
What do you get? If it has 'not allowed' there - just take Step 3
I got the same results when I typed *ADP* in the terminal, the result were just a couple of commands but there no 'not allowed'.
but I already enabled the OEM in my phone, but I'm not sure if the phone is connected to the ADP.
Ok, when running fastboot flashing unlock - make sure your phone is in bootloader
hello. my phone is not going to the recovery mode after following the steps.. its going back to bootloop. I tried all steps but bootloop is not changing for me. My phone was on oreo.. so i tried flashing the nougat file u mentioned . still same situation.please help
Did you install a kernel from extra step as well?
That's a bad sign. You need to take it to repairs then
oh no.. Im in Dubai. We dont have any proper service centers for Nexus as it was never launch here officially.
Rythu Jo is it OEM unlocked? And do you unlock icon under Google Logo?
Do you loose your data when doing this?
Hi, I've successfully installed the android studio and set up adb, but running "fastboot" interminal shows no command. How to fix that?
Hi, what about if you run adb command?
The abd command works good
Navigate to /Android/sdk/platform-tools directory, there will be a fastboot file, if it's there - you can run it from there. That's the directory where you installed Android SDK
In your case I think you can just type commands like fastboot --version and it will work, but running just fastboot without command name doesn't do anything.
Although fastboot command in terminal doesn't work, I can still run "fastboot devices" and :fastboot flashing unlock" successfully after writing sdk directory in bash profile.
The new problem is I've already unlocked my nexus from your instructions, but in step 4, my phone can't get into the recovery model and just gets into bootloop again. How is that?
Hi i have a question? what's the cause of this boot loop? Is it because of the cpu problem with 8 core processor of which 4 of them are bad(even though your not rooted or install a custom rom but rather have a fully stock version phone) or is it because of the update(software) pushed by google(phone is good as new. Still get a chance that it may get a boot loop after OTA update?even though processor is good as new?). Hope you'll understand what i'm talking about. Hope for your reply :)
Hi, yes, it's something wrong with this processor. There are many issues with this one on other phones and on few Huawei phones. I don't think it's has to do anything with software updates, my last update was about a month before it went to bootloop. And I tried flashing Marshallow factory, nothing changed
If you have a warranty - I recommend you getting your phone back to the store so they fix it on a hardware . level. I didn't buy a warranty, but it's got some 3 years of factory defect free repairs like this
Thanks for your reply. How is your nexus 6p now or do u no longer have it?Is it still functional even though you've implemented the fix?do u still have the boot loop issue?or is it still working normally with only 4 cores overclocked. Ohh forgot how is the performance with only 4 core overclocked? Hope for your reply and thanks again for your reply :)
So I used it for about a week in 4 cores state. It was so slow, worse than any cheap phone from 2012. Decided to try installing this kernel to speed it up (extra stuff) and just after few minutes, it went to bootloop again. Wouldn't even go to Recovery Mode. Rerunning all the steps from video again didn't help. I guess it just died completely. I gave it to the store were I bought it two weeks ago, waiting for free repair. I'll make a new video about it when I receive it from repair
So I used it for about a week in 4 cores state. It was so slow, worse than any cheap phone from 2012. Decided to try installing this kernel to speed it up (extra stuff) and just after few minutes, it went to bootloop again. Wouldn't even go to Recovery Mode. Rerunning all the steps from video again didn't help. I guess it just died completely. I gave it to the store were I bought it two weeks ago, waiting for free repair. I'll make a new video about it when I receive it from repair
I can access the boot mode, but when i select recover / or any other option (besides power off) it just loops. no access
You mean after going through all the steps?
before starting.
gotcha, not the best sign, but you still can try
hi my nexus 6p showing qualcomm port 9008...and very rarely showing google logo only i cant unlock bootloader(cant acess usb debuging) what should i do???
is there any solution???
You can't even get to bootloader?
My Hexaville no.it only showing qualcomm Qdloader 9008 port
That's probably worse than in my case. If you can't access bootloader - then you won't be able to try this solution. Take it to repair shop or contact the seller
actually im working in huawe authorised care in India and our Tech help suggest for main pcb replace.so im trying to make it alive.coz its SW prob not Hardware.ok bye
C:\Users\Owner>fastboot devices
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\Owner>fastboot flashing unlock
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\Owner>
thats what i get :(
HELP!! i am TOTALLY stuck!!!
step 1 is not the same page look anymore
step 2 - where do i type all this? cmd? it wont work
Yes, terminal (Mac, Lixun), command line (Windows)
C:\Users\Owner>fastboot devices
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\Owner>fastboot flashing unlock
'fastboot' is not recognized as an internal or external command,
operable program or batch file.
C:\Users\Owner>
thats what i get in cmd
Check the conversation with Cecil Ivor below
It worked, but after 1 month it crushed without reason.. no reaction even if I plug it ! Any ideas ?? Thx
Got no idea, dude. I just created this video based on several tutorials, to put everything together. I'm not into mobile repairs.
P.S. if you followed my final step of CPU overclocking, then it's to be expected. Your phone is dead for good then
Thanks ! on the last transfer of the EX4.. I am using a Windows to transfer to my phone so I have just tried to connect the phone to the PC and see if I can just "regularly" transfer the EX4 to my Nexus6p directory (via a regular usb file transfer) BUT I couldnt find the TWRP file! please help me.
So you went through all 6 steps already and phone works? If it does - I really don't recommend installing custom kernel and overclocking CPU as I updated in description. If you still want to install it - the reason you didn't see EX4 file is because data is encripted on the phone and despite multiple attempts of me trying to decript it in TWRP - I couldn't. So your phone should be in TWRP and connected to computer when you're moving EX4 file, then you'll see TWRP folder
Alright! Why do you don't advice me to make this overclocking CPU? how faster it will be and what are the risks? plus- What are the chances for these risks to happen. thanks bro!
The risk I'd say is more than 90% of your phone getting killed for good, so you'll have to go to repair shop. You see, the problem with TH-cam videos is that it's really hard to change the message you send, you either delete the video or just update description haha
I am risking it because if this won't work- I will just buy a new phone (now too slow). So I made the move and made it! How much time till I know if it is safe or not?
my phone wont even boot to fastboot
my nexus 6p still stucks on google logo after I undergone step 3 for 2hrs still it flashing again and again. step 3 does'n work.
help me to fix this.
ayyappan D same and after a while it just started flashing a red led
ayyappan D try with N2B48G image, it should fix.
but my oem is locked.i dint unlock developer option in my 6p, so I cant boot any image file
ayyappan D follow this Video th-cam.com/video/_CsxCdCuZcU/w-d-xo.html, intially my phone is also locked, so I heated my phone with hairdryer for 10-15 mins, later I made it switch off with long hold of power button and restarted, then it booted properly I unlocked and did a restart, try this once
at what temperature?
thank you for your help. just a question. should i update my system to 8.0?. it went into bootloop when the update version was 8.1
Unless you want to install a dedicated patch for that particular Android version
Hi, so after optional OEM unlocking using a hair dryer, my phone turned on and is working just as it used to. I've seen no problem so far. Is it extremely necessary to follow the next steps instead of using it as it is? What might the harm if I don't do so?
It will go to bootloop sooner or later. Sure, try using it like it for as long it works. But enable OEM unclocking anyway, because you don't wanna heat it up again
Hi
Im all stock and not rooted when boot loop happened.. I applied this fix and it worked for 1 week now.. Thanks!
BuT i have question, I received an update for November patch and I'm afraid to install cause I'm thinking it will bootloop again.. is it safe to install update ?
No, don't install it. It will go into a bootloop. I tried. Because 4 cores.img you installed is intended for Nougat. Though when there's an Oreo version of it - you can update to Oreo, install Oreo 4cores.img version and it will work
How's the performance btw?
I was following up with both google and huawei for 2 months. Recorded all the voices. Sent a vakil notice. At last yesterday they called and said they are ready to give free service. All the Best
Congrats!
I was also facing the same problem bro and I went all service centers in India but they suggested me to change the motherboard!!!
after fix can i upgrade to android oreo now?
Thanks for the video, but the thing is that idk which program i shoud use for the last step. I mean, you have mac so you use Android file transfer. But i have Windows 8.1, so i really dont know what to use, when I installed 3 different programs, those programs wouldnt find my device connected (or normally told me that i should "allow access to device data" from my cellphone, but the cellphone would not turn on). Hope can get some help .
That's an extra step. Your phone should be working after completing Step 6 (not guaranteed though)
My Hexaville Yeh... at least it doesnt reboot in a loop, the thing now is that it doesnt even start lol
And yes i stopped in the step 6
Well, at least i tried
Ty for replying
how can i check my android version when i am on team win recovery ?
Try checking in settings, if it's not there - just flash Nougat and follow the steps. Later you can flash Oreo image and install matching patch if you want to
Hey man, thank you for the video, I was following along and after activating OEM mode and going into recovery mode the phone just booted normally, kind of after performing a factory reset, it even redownloaded all the apps I had with Drive's security copy. Do you think the loop will happen again or am I off the hook for now?
Good for you! Hopefully not, I heard only from one person about something like that
Thanks man, unfortunately it did end up going into the bootloop again so I came back to your video and finished the fix haha, it worked perfectly. It works much slower than before but hey, better to have a slow phone than no phone at all right?
For sure, try double pressing the power button to take pics/turn off screen/repeat like this five times - photos won't even get saved, crashing at HDR processing lol
Can you ever get your data back from a phone that has gone into boot loop?
You can, if you heat it up with a hair drier, it will work for few hours. Not 100% that it will launch, but for most people it works
My Hexaville I tried last night for a couple hours last night with no luck. Would heat it up to the point it would shut off as it got so hot.
Then you can't recover data anymore. If you go to repairs - they'll tell the same
Hi, thanks this help me to fix my nexus 6p, one question, could I update again to android 8 after doing this downgrade, I mean if I do, my nexus will do the same?
jairo reyes rosa Not via OTA updates for sure, only manually and it can break the patch. I tell you one thing: you're lucky if you fix it and it's still fast enough to use
even ADB i can't do it !!! try many different steps no working RIP
Thank you man.. u are amazing!!! my nexus 6p is back to life. U r the best
Thank you for the help! For some reason, after installing EX4 successfully it will only boot up to TWRP after the reboot. How can I tell it to boot to the Android OS?
Jonathan Green do it with N2B48G Img it will boot inside.
i am not sure if i enabled oem unlocking and usb debugging can it work still?
No
To check if USB debugging enabled - follow Step 2, there I run 'adb devices' command - if it doesn't print anything while phone is connected - your USB debugging is disabled
To check if OEM unlocked - run 'fastboot flashing unlock' , again from Step 2. If it prints that flashing not allowed - your OEM unlocking is not enabled and you need to heat up your phone (Step 3) to enable it in settings. And don't forget to enable USB debugging it then if it's off
@@MyHexaville then what - throw the phone in the bin?
how to remove frp huawei nexus 6p
Hairdryer trick helped us. Wonder the link between hairdryer and the phone switch on.
It is because the phone shuts some cores down to try and cool down
Nazdarovya! It works!
about the last part, don't you think that if we speedup the processors, eventually they will burn?
Thanks
Hahaha. I left a note in description that I basically don't recommend going through the last step
Yeah, probably its for the best, leave it like that or burn your house down haha... but did you figure out how to enable some of the disabled core after that?
No, I just gave it for repairs at the store where I bought it. Free of charge. Should've done it at the first place. Waited for a whole month to get it back
FYI, i bought it straight from google store, contacted them, they said, because I dont have extended warranty, I should cal Hauawi, and they said, send us the phone and we will replace it, BUT only if you didn't mess with it... It will take them 45 days! to send me a new one.... so.. no better options for me but leave with it for the time being.
Try finding some phone repair shop, new 6p was something like $350 last year, so repair price respectively should be max something like $50 - $75. It's just one part to replace I think. From what I've seen from that guy in NYC who repairs Macs - it's going to be done in 5 minutes and you get it back :)
My device is unlocked. bootloader already unlocked. but i can't get into the recovery to find the android version. in that case what should i do? please reply :(
Just do Step 5 and 6, this will bring your phone to life. But extra step after those with installing EX4_1_1_4Cores is really dangerous, try it only if your phone is way slow to be usable anyway
tried running the batfile
gets an error :
target reported max download size of 494927872 bytes
sending 'bootloader' (3552 KB)...
OKAY [ 0.102s]
writing 'bootloader'...
OKAY [ 0.209s]
finished. total time: 0.313s
rebooting into bootloader...
OKAY [ 0.023s]
finished. total time: 0.024s
target reported max download size of 494927872 bytes
sending 'radio' (48728 KB)...
OKAY [ 1.073s]
writing 'radio'...
OKAY [ 2.179s]
finished. total time: 3.255s
rebooting into bootloader...
OKAY [ 0.022s]
finished. total time: 0.023s
target reported max download size of 494927872 bytes
archive does not contain 'boot.sig'
archive does not contain 'recovery.sig'
Seems like many people get it, check my response to Mona Le (below), I explain how to flash file by file manually
Thankyou Mate, I appreciate your help bringing this video and helping people all over the world.
I would like to ask does this works only on : Nexus 6p N2G48B ?
Because I have downloaded the latest 8.1.0 (OPM1.171019.011, Dec 2017) and tried the steps. but it dont helps. keeps bootlooping
Sure, man. Hopefully your phone gets to life and still is fast. Yes, the patch that I have here in for N2G48B version only. There're Oreo patches came out already though, I haven't tried them. This one is for 8.1 try, tell me if it works - I'll put it in the description then
androidfilehost.com/?fid=745849072291693389
Thanks for the vedio but after finsh all steps one secreen coming and said enter the password after rest!!?
I am looking foe your support
is that a permenant fix !? or is going to loop again ;(
Don't go to extra step - then it's supposed to work fine. Slow though
Hey my Phone isnt going into recovery mode!!
Went through all the steps, I'm up and running again!! Thanks so much!
Thanks so much for this bro. I was able to reboot to recover my photos with the hairdryer before I bin this piece of shit phone. Can't afford to have it flake out on me whenever it feels like.
Indeed
How did you get it to boot using hair dryer?
Open terminal,ehh whatt???,im on windows 10,whats a terminal ???????????????
It is a text interface for your computer. It's called the command prompt on windows. Windows key + r -> "cmd" will open it then you can follow the rest of the instructions!
will this work for OREO OS as well ?
No, this particular fix is for Nougat, that's why I explain how to flash Nougat here as well, prior installing the patch. But you can try installing this patch (skip Step 4 and 5) and use this file instead of what I used in Step 6 drive.google.com/file/d/0B7TP6GXR0wAVWVlvckU5LUtkYkE/view
I haven't tried it though, at that time there was only working Nougat patch. So tell me if it worked for you and what version of Oreo you had
HOLY CRAP THE HAIRDRYER WORKED!!!
Thanks it worked. As you said, it's slow, but at least I can keep it as a backup phone.
will step 2 clear the content of phone?
No, step 5 and 6 do that
Hi there, I used a normal convection oven from the kitchen. Set temp between 75 C and 100 C and wait max 10 min.
I tried with the hair blower and heat gun...This isn't as accurate as the normal kitchen oven and it didn't worked.
The temp stayed to low ( bootloop continues) or heated up to far and everything shuts down.
Don't try the combi magnetron because you need regular heat and a combi oven only has 50 C 75 C 100 C and so on steps..
I used a old plywood piece of wood and sawed a trench so my phone had a stand, use landscape mode.
Are you freaking trolling? An oven LOL
Great video but what if my version of Android is 8.1.0 and stuck in Google logo. You help is much appreciated. Thanks
Thanks, you could either go through all the steps above, you'd end up with Nougat version that you can't update to Oreo (tested by me)
Or there's an Oreo patch available now, I haven't tested it myself and don't know for which version of Oreo it would work. In this case you need to skip Steps 4 and 5 and in Step 6 use this file instead drive.google.com/file/d/0B7TP6GXR0wAVWVlvckU5LUtkYkE/view
Tell me if it worked for you
Thanks, you could either go through all the steps above, you'd end up with Nougat version that you can't update to Oreo (tested by me)
Or there's an Oreo patch available now, I haven't tested it myself and don't know for which version of Oreo it would work. In this case you need to skip Steps 4 and 5 and in Step 6 use this file instead drive.google.com/file/d/0B7TP6GXR0wAVWVlvckU5LUtkYkE/view
Tell me if it worked for you
My Hexaville No it didn't work. I have upgraded to pixel now which is a better phone than 6p. Anyways thanks for your help.
Thanks for the tutorial. It worked but the phone is really really slow like you said. Shame on Google for not fixing it.
I get this message
FAILED (remote: oem unlock is not allowed)
finished. total time: 0.022s
What to do ?
Unlock your freaking bootloader.
you'd have to boot into your phone. Use a hair dryer (on hot mode) to heat up the area between camera and fingerprint scanner, you'll boot into the phone. Then you turn the Developer Options mode on, and in that, turn "OEM Unlocking" to active. Then you use the existing method and you'd be through it without a problem
SHAYAN AHMAD I tried multiple times, not booting.. :(
See, here is how it is going to work: take a blow dryer and heat up the area right below the middle of the camera. Once hot, the phone will automatically boot into the lock screen. From there quickly goto dev options and turn oem unlocking on. It won't be very long before the phone will automatically get back to boot loop. One more thing, it's because of the recent Android security patch this happened. So when you get back to 7.1.2 try flashing the Rom with a custom one and speed it up that way. You'll still be getting 8.0 update in your notification drawer. Simply don't update then. The phone will be a lot slower than usual though. Best of luck.
@lil slav you can't update with an 8.0 with the bootloop. 8.0's security update is the reason the phone runs into bootloop. Thus flashing a 7.1.2 is the wisest way to get around it. Moreover, 7.1.2 with 4 cores is going to enable the phone to run but slowly therefore in order to speed it up you might have to go with a custom such as twrp to make the phone faster. Hope this helps.
I'm stuck on the 'fastboot devices' step. 1:44 I get a message saying 'waiting for any device'
It worked! Thank you. 2019
Julio Castañeda can explain
Worst phone ever by Google.
Not even service centre can repair phones stuck in bootloop as they claim Google did not provided any tools to repair such issues.
Its seems Google is not even bothered.
Google should atleast recall and sort the issues
They did fix my phone at the service center eventually, Sweden
My Hexaville Oh Your Blessed .......... here in Mumbai(India) they straight away suggest to replace the mother board.
how much for that?
My Hexaville 300$
holy smokes
Lol i was stuck on boot loop and i just did recovery and says no command and i turn p
Off and start again it just started normally.
you are the best in this case thank to u
fastboot command gave no results
You mean in step 1?
yes i am getting this
C:\Users\***\Desktop\platform-tools>fastboot
fastboot: usage: no command
Check that directory, is fastboot file there?
yes "fastboot.exe"
Try different variations .fast and press TAB or ./fast and press TAB or fast and press TAB. If autofill doesn't work - follow this tutorial to add platform-tools to path, so that you can run adb and fastboot from anywhere, it could help www.itprotoday.com/management-mobility/how-can-i-add-new-folder-my-system-path
THANK YOU!
How to fix the problem of no service .there's no signal .Nexus 6p
If everything in Mobile network is set to default and it still doesn't work - take it to repair shop. Pretty common problem on phones
You have to heat the phone (hair dryer) while it boot loop 5 ..10 min and then you must to able developer mode and usb debugging. Its soldering chips problem and finally change the rom. Its work perfectly for me 😀
Thank you, BUT this phone isn't worth my time.
new phone soon i guess
try plugging in the charger, worked for me :)
i will try it tomorrow ill let u know what happened
Thank you!!!
Take out your sim card and it will be fine
what will be fine bro
@@kobbyeben9952 bootloop bro
@@sunnahoversociety bullshit
@@shubhammishra2576 work sometimes
holy crap... i hope this dude is never a trainer or instructor anywhere. what a mess of a tutorial.
That's what happens when you buy nexus phone OnePlus all the way
haha, no more flagships for me. Price, performance/life time ratio is way too low
This is some BS. Google should just fix this for us.
You bought it online?
Ya. I bought it soon after it came out from the google online store. It went into bootloop mode a week or 2 after the warranty ended. I remember i called them then but they didnt help at all. Just sent me to Huawii. Just found out about this bootloop fix a few days ago but it seems pretty confusing/technical.
Gotcha, just try going through 6 steps, extra stuff is quite dangerous.Anyway, your phone is a brick now, so you ether find somebody to fix it for you and pay or do it yourself. This phone is pretty good in specs still in 2017 so I think it's worth to fix it. For example, at each step I explain what the expected outcome should be, so I think it's manageable with spending some time
One thing: I saw people who can't even open a Recovery Mode, this probably means your phone it dead for good/needs hardware fix.
btw when I wrote "this is some bs" i meant the situation, not your video. Ill give it a shot soon
huiwai is wack
making people stupid