Thanks for the video, very helpful. I've had these recovery points sitting around for over 12 months ready to install on my MN, but have been putting it off as I know lining those nuts up through the chassis will test my patience.
great video with lots of information ( i am a see-and-do guy) not good at following written instructions. I did get told though that you shouldn't drill additional holes in the chassis under any circumstances. like to hear your thoughts on that?
Hi mate apologies this is probably a stupid question. Once you’ve tightened the bolts onto the nuts inside the chassis, do you just snap the long wire bits off and leave it at that? Cheers.
Great video mate it has helped a lot. But on another note, surely they can't be legal because those two long channels in each side of the chassis rails are crush points.These things bolt over these chassis crush points which would make the crush points uncrushable. I bet that some Insurance companies would make your policy Null & Void for that & instantly right off your cover.
Hi mate, i also drilled in my triton's frame. Just wondering if i didn't put any paint on that drilled holes will it start to rust and eat the frame? Or will it just surface rust? Hope you will answer my question. Thank you
If this wasn't youtube, I'm sure you would have substituted "absolute nightmare" with "absolute ...." to properly describe getting that god forsaken nut in ... Thanks again for the videos :)
Hey mate, quick question, I watched your vid on the cane toad snorkel from a few years back. How is it holding up? Would you recommend? It’s 130 bucks and being so cheap scares me lol. Thanks!
Good job mate. Is this an MN is it? Love AEG tools, how's it goin.. Black is boring go for green, why not. Oh except the car colour is good in black, phew.
Hey mate, yes its MN 2010 GLX-R, Love the AEG tools as well! I'm doing well, was a long recovery after a back injury earlier this year. keen to getting back to work and making videos. Cheers
@@ServiceMyRide picked up a couple of cans today to spray accessories i buy. Will be getting these recovery points shortly not looking forward to those nuts though.... one more question did you use a clear coat?
Hi Do you need some great lighting upgrade for free for your car to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 yrs and w're looking for sponsorship!
Really great video. The camera angles really help to explain everything. Very informative. Cheers 👍
Thanks, really appreciate the positive feedback 👍
These look mint i really should upgrade, glad they are compatible for ARB bar. Great vid legend
Thanks for the video, very helpful. I've had these recovery points sitting around for over 12 months ready to install on my MN, but have been putting it off as I know lining those nuts up through the chassis will test my patience.
It will definitely test the patience, just don't work the wire to much and snap the weld off the plate, Things could get messy if that happens.
what does MN mean?
@@oneandonlyTanmodel of the triton
Great video. Wish I’d done more research before buying an Ironman Bullbar for my mn, it doesn’t support recovery points :(
great video with lots of information ( i am a see-and-do guy) not good at following written instructions. I did get told though that you shouldn't drill additional holes in the chassis under any circumstances. like to hear your thoughts on that?
Hi mate apologies this is probably a stupid question. Once you’ve tightened the bolts onto the nuts inside the chassis, do you just snap the long wire bits off and leave it at that? Cheers.
Great video mate it has helped a lot.
But on another note, surely they can't be legal because those two long channels in each side of the chassis rails are crush points.These things bolt over these chassis crush points which would make the crush points uncrushable. I bet that some Insurance companies would make your policy Null & Void for that & instantly right off your cover.
Hey mate, would you trust those tow points for winch recovery if using an equalizer strap/bridle?
cheers
Super helpful as always, keep them coming mate 👍
Awesome channel mate! Really well presented
Cheers for the vid , helped my installation
Hi mate, i also drilled in my triton's frame. Just wondering if i didn't put any paint on that drilled holes will it start to rust and eat the frame? Or will it just surface rust? Hope you will answer my question. Thank you
If this wasn't youtube, I'm sure you would have substituted "absolute nightmare" with "absolute ...." to properly describe getting that god forsaken nut in ... Thanks again for the videos :)
A few choice words may have slipped out that day, Nightmare wasn't one of them.
Great video as always!
Cheers
Looking awsome
Thanks mate
Hey mate, quick question, I watched your vid on the cane toad snorkel from a few years back. How is it holding up? Would you recommend? It’s 130 bucks and being so cheap scares me lol. Thanks!
Your mars performance headlights. How long have you had them and have they fogged up like the stock ones do?
Hey I bought a pair but was worried about drilling holes in the chassis, have you noticed any problems yet?
Hi, How did you strengthen the mounting points for the new plates? cheers
Awesome mate. Great work. Did you sand back your recovery points before repainting?
Yeah I did, just removed the yellow, didnt go back to bare metal all over.
Hey mate, what kind of paint did you use to paint the recovery points? Look mint.
Hi mate, Dupli-color spirited green metallic (Mazda) DSMZ216 from Supercheap Auto.
@@ServiceMyRide legend thanks mate 👍
Gday mate you should do a video on what your exhaust is all about thatd be awesome
How about a walk around of everything done since I bought it.
@@ServiceMyRide Yeah bloody oath mate that'd be awesome..... Up the tritons
When installing an arb bar to an auto mn you have to relocate the trans cooler .
When I installed the ARB bull bar there was no mention to relocate the cooler! was no need to.
Its in their product catalogue
Great video, very helpful now l can do mine a lot easier, look forward to those nuts.
Thanks mate, the passenger side was a little easier, was getting use to bending the wire.
Thanks for the tip.👍
Good job mate. Is this an MN is it? Love AEG tools, how's it goin.. Black is boring go for green, why not. Oh except the car colour is good in black, phew.
Hey mate, yes its MN 2010 GLX-R, Love the AEG tools as well! I'm doing well, was a long recovery after a back injury earlier this year. keen to getting back to work and making videos. Cheers
@@ServiceMyRide Rightio, mine's an MN 2010 too but a manual glx so thanks for sharing your videos.
Saludos desde chile 🤘🤘🤘🤘🤘
Awesome video what paint do you use i love the colour.
Thanks mate, Dupli-color spirited green metallic (Mazda) DSMZ216 from Supercheap Auto.
@@ServiceMyRide picked up a couple of cans today to spray accessories i buy. Will be getting these recovery points shortly not looking forward to those nuts though.... one more question did you use a clear coat?
@@MrBillyr7 Yes I did mate, primer+color+clear, good luck, look forward to seeing the results.
Winch instal next ?
@Jarryd Ross Not yet still looking for one.
does drilling holes in the chassis affect inspections?
@Tan110688 No, the bullbar, mounting position and method is ADR approved.
@@ServiceMyRide decent thank you
Hi Do you need some great lighting upgrade for free for your car to help you better driving, off-road and adventure.We're the pro auto lighting manufacturer for nearly 20 yrs and w're looking for sponsorship!