Willem. Thank You For Producing Another Excellent Video, Which Proves You Don't Need All The Expensive Tools To Create Lures, Just A Great Imagination "Great Work,Well Done" 10/10
Maddd props!!! Those were beautiful lures!! And how that last one swim at the end, flawless! Thank you for the video, very well worth the watch. Appreciate the DIY. Amazing coloring.
Good video, good music, good cat, good man. I love it,. It's so inspirational for me in my fishing since 7 years ago! (sorry for my bad english, i'm from France =D)
1 thing i use for the tails is a Kinda Medium Sized Screw just screw it in a centimeter then cut the head off the screw , and simply twist the tail on ! u should give it a try ! so easy to switch and adjust the tails ! Otherwise Great video !
Good afternoon! I also engaged in manufacturing of baits Jerkov. I would like to note one important detail. In your work, I missed the turn-hydro-insulation !? I have no hydro insulation during fishings tears hydro blow the paint from the bait! I deep fried in sunflower oil harvesting. I wish you success in your work!
Waarom moeten ze eigenlijk zinken??? Is het niet beter dat ze net de oppervlakte raken zodat er meer oppervlakte verstoring komt, wat meer vissen aantrekt. Laat alsjeblieft wat weten hierover, ik ben heel benieuwd. Cool dat hij NL is.
spot on! i have had a go making those buck tail lures are they any good to use for pike? i just used a big hook with a long shank tied coloured feathers from a craft shop onto the hook with coloured cotton then and put some angling glue on they will not get that off . thanks Matt
Hello Willem, congratulations for your work. I make and I Jerkbait also uses EnviroTex, I tested the Epoxy Mr Boat and does not apply well to the lure, if you have good advice I'm interested. Good luck.
Don't know about mr boat epoxy I seen it on Willems channel too. About E-tev I found that soft plastic contact melts the paintwork on the lures and ruins the work
Ik had nog een vraagje als je die epoxy voor het eerst mixt voor de eerste laag wacht je dan een half uur en dan er op smeren en dan een uur wachten en dan er opsmeren gelijk na het mixen
ever have any issues with paint lifting and epoxy cracking after being used a few times. I've made over 500 baits and had this happen and still Bogles my mind how it happen.
A very nice tutorial , most beautiful baits , .....I know about the efforts making such videos , ...thanks a lot for your work and for sharing , ....tight lines , 61diemai
Btw, was just wondering since I was looking into this, what size eye screws are you using? I'm guessing you are using more than one size? Just curious, for this/these lure(s).
You are doing a great job! i would love to see a video on how you made your Epoxy Tumbler. Did you use a microwave motor or some kind? Best regards - Stonza Photography
wow , mooie video en nice pike :) en waar koop je zo een schroefogen en kun je jerkbaits eigelijk ook spuiten zonder zo een airbrush apparaat ? alvast bedankt mvg ilian
jo ziet er echt awesome uit maar :S wat voor hout gebruik je en waar haal je het ? want wil er zelf ook 1 proberen te maken maar wil niet gelijk een hele collectie aan hout hebben
Joww, je kan het best mahonie of merantie hout kopen. Wel moeilijk om aan te komen maar bij een houtfabriek kan je de restjes meestal gratis krijgen. Gr Robin
+Malcolm Phillips Hi Malcolm, there is one guy that is selling them here in the Netherlands. I believe there was a webshop in Germany that also sells them. I am using the 4" Relax twisters.
![ละลาย (LALALYE) - DAOU PITTAYA ต้าห์อู๋ พิทยา [OFFICIAL MV]](http://i.ytimg.com/vi/wo6r9TgausI/mqdefault.jpg)
A real pleasure to watch, thanks
Thanks Paul, good to hear from you!
I guess Im kinda randomly asking but does anybody know of a good website to watch newly released movies online ?
Willem. Thank You For Producing Another Excellent Video, Which Proves You Don't Need All The Expensive Tools To Create Lures, Just A Great Imagination "Great Work,Well Done" 10/10
finally someone with some great music to his great video
Maddd props!!! Those were beautiful lures!! And how that last one swim at the end, flawless! Thank you for the video, very well worth the watch. Appreciate the DIY. Amazing coloring.
i just watched your vid from 2 years ago. Looks like you're getting really good there. Great work man
Nice job my dude! And your Hip hop instrumental choice is gutta yo. I love it!
Amazing Jerkbait...good work WR.
The music just works!! Awesome vid!!!
god i love this hobby, gives you instant results if a good job has been made.
They really are beautiful lures.!
Excellent job.
the sparkle is the make-up stuff,.. wicked painting man u got it down pat
Well done dude. The video was super pro and so are those baits!
Good video, good music, good cat, good man. I love it,. It's so inspirational for me in my fishing since 7 years ago! (sorry for my bad english, i'm from France =D)
Bijzonder knap gedaan Willem...
Meer van dat!
Well done dude!!!
Very nice vid and realy smooth beats bro! Two thumbs up!
Tight lines, krisztián
Awesome work. Well done !!!
Nice video and great work. Greetings from Germany
really well made tutorial!
Very well done indeed,i enjoyed your video.
Very very good!!!! Compliments for construction
Like your stile whit painting and everything👑👑
awesome media/editing skill
Enjoyed watching the video, nice one
Great vid mate and awesome lures
That was awesome! you have a gift my friend.
nice one m8! well done!
1 thing i use for the tails is a Kinda Medium Sized Screw just screw it in a centimeter then cut the head off the screw , and simply twist the tail on ! u should give it a try ! so easy to switch and adjust the tails ! Otherwise Great video !
Ze zijn bijna te mooi om mee te vissen :P
Zeer netjus maat👍🏼👍🏼
Zooo hee! Echt heel goed werk man! Heel professioneel ook!
I catch pike even with a piece of wood ...😊😊...it is about the movement. ...everything what is moving in the water ....the pike will attack. ...
Awesome vid!
Mooi gemaakt!! Moet je perse primer er op doen??
Awesome. Well done. Real pleasure. 👍
enjoyed that vid good down to earth craft
Hele vette video Willem!!
Hi, Nice video thanks a lot.
I have a question, when you check the lead size, do you take care about the varnish weight?
Thanks for answering
toffe video! Lijkt me leuk om me hier eens in te verdiepen.... Vette muziek trouwens
Great Video and Information
What size treble hooks do you use? They look great!
Goede video Willem!
Nice vid :)
Good afternoon! I also engaged in manufacturing of baits Jerkov. I would like to note one important detail. In your work, I missed the turn-hydro-insulation !? I have no hydro insulation during fishings tears hydro blow the paint from the bait! I deep fried in sunflower oil harvesting. I wish you success in your work!
NIce pleasure to look. and is the sound at 8.30 ?
Waarom moeten ze eigenlijk zinken??? Is het niet beter dat ze net de oppervlakte raken zodat er meer oppervlakte verstoring komt, wat meer vissen aantrekt. Laat alsjeblieft wat weten hierover, ik ben heel benieuwd. Cool dat hij NL is.
Artista!
spot on! i have had a go making those buck tail lures are they any good to use for pike? i just used a big hook with a long shank tied coloured feathers from a craft shop onto the hook with coloured cotton then and put some angling glue on they will not get that off .
thanks
Matt
Hello Willem, congratulations for your work.
I make and I Jerkbait also uses EnviroTex, I tested the Epoxy Mr Boat and does not apply well to the lure, if you have good advice I'm interested.
Good luck.
Don't know about mr boat epoxy I seen it on Willems channel too. About E-tev I found that soft plastic contact melts the paintwork on the lures and ruins the work
Awesome :) more please!!!
Ik had nog een vraagje als je die epoxy voor het eerst mixt voor de eerste laag wacht je dan een half uur en dan er op smeren en dan een uur wachten en dan er opsmeren gelijk na het mixen
Джерки очень красиво раскрашены,молодец
Hello. I'm Chinese. To ask you a question? As the bait you weight of front and back with a weight of OK? Tic pole is swimming?
This is what wood?
Super video! Hoe werkt het uitloden nou precies? (plaatsen van de gaten)
Super Nice man! Verkoop je ze ook?
Hoi ik heb een vraag waar haal jij die lange oogjes voor in het kunstaas ik kan namelijk alleen de kortw vinden
Really cool!
Great video! What kind of wood do you use?
Meranti wood
Nice job
Felicidades, lo que haces es genial, aparte de buen pescador que eres, también fabricando señueolos.- abrazos
Leuke video weer tot nu toe
Waar koop je alle spullen die je nodig hebt, zoals die screw in eyes?
ever have any issues with paint lifting and epoxy cracking after being used a few times. I've made over 500 baits and had this happen and still Bogles my mind how it happen.
amazing video what's songs did you use!
A very nice tutorial , most beautiful baits , .....I know about the efforts making such videos , ...thanks a lot for your work and for sharing , ....tight lines , 61diemai
Как понимаю щука поймана на спиннинг. Почему вы не ловите кружками, никак не пойму? Это же здорово интересно.
10:33 i saw the wake and i was ohhhh
Parabens pelo seu trabalho esta isca artificial artesanal ficou muito show 👋👋🐠
Supermooie en leerzame video!
Willem romsijn
Haha mar tove video
Awesomeness ❤
Mooi gemaakt man
Btw, was just wondering since I was looking into this, what size eye screws are you using? I'm guessing you are using more than one size? Just curious, for this/these lure(s).
hee jong kerel! hoe heb je precies die droogmolen voor de epoxy gemaakt? want ik krijg telkens druipers. zou graag ook zo eentje willen maken
Hello, great video, may i ask you what the song you used at 7:40 in your video thanks
Great video
I signed up for your channel
Great job! i can't find screw that you use :(
Can i buy these type of screws online?
thank you so much
Alessio Sabatini here in Holland I buy them at www.lureparts.nl ;)
Omg so nice!
Hoe ontvet je na de paintbrush? Bij mij ontstaan er kraters in de epoxy van mister boat?
You are doing a great job! i would love to see a video on how you made your Epoxy Tumbler. Did you use a microwave motor or some kind? Best regards
- Stonza Photography
Bedankt ik heb net de zelfde epoxy besteld en ga het weekend ook mijn aasje spuiten
Nice pike :D
Can you share your lure templet with us ? Thanks!
Wat doe je in de epoxy om hem te laten glitteren
Cool!
wow , mooie video en nice pike :) en waar koop je zo een schroefogen en kun je jerkbaits eigelijk ook spuiten zonder zo een airbrush apparaat ? alvast bedankt mvg ilian
what is the name of that begin song
thats nice
They look damn Nice
how thick are your lures?
how do you know where to put the weights
Nice. I wont bye this fishing lures. Cen i
?
Wat voor een soort filler mix je met water en die spuitbus is dat vernis
Filler is Kneedbaar hout van Alabastine. Spuitbus is een blanke lak, kost 2 euro bij de action.
Because everything goes better with a cat.
What is the second to last song called ?
Nice vid man! Where did you fish in the video?
Somewhere in Holland ;-)
jo ziet er echt awesome uit maar :S wat voor hout gebruik je en waar haal je het ? want wil er zelf ook 1 proberen te maken maar wil niet gelijk een hele collectie aan hout hebben
Joww,
je kan het best mahonie of merantie hout kopen.
Wel moeilijk om aan te komen maar bij een houtfabriek kan je de restjes meestal gratis krijgen.
Gr
Robin
a oke XD weet je misschien dan ook een fabriek in zuid holland ?
nope kom uit zeeuws-vlaanderen, maar msschn effe googlen?
what type wood do you use
Awesome!!!
Where do you get your screw eyes
Hi Willem, where do you get the tails from?
Malc UK :)
+Malcolm Phillips Hi Malcolm, there is one guy that is selling them here in the Netherlands. I believe there was a webshop in Germany that also sells them. I am using the 4" Relax twisters.
+Malcolm Phillips I get them from discountbait.com they are called something like "magnum tail" and I think are made by Kalin.
Kerry, I Clicked On Your Link Buddy But! Only Got The Purchase Option Of The Domain Name? Can You Advise
Netjes 👍