Symptoms & Diagnosis of a Failing VANOS Solenoid!
ฝัง
- เผยแพร่เมื่อ 30 มิ.ย. 2024
- Experiencing issues with VANOS Solenoids? In today’s video, Jake covers a complete guide to understanding the VANOS system, specifically focusing on the crucial role of the VANOS solenoids. He explores the symptoms of a failing VANOS solenoid, how to diagnose these issues, and the best replacement options available. Whether you're a seasoned BMW owner or new to the world of luxury vehicles, understanding the health of your VANOS system is crucial for maintaining your car's performance and longevity. This video aims to empower you with the knowledge to identify, diagnose, and address VANOS solenoid issues.
If you are looking to replace your VANOS solenoid(s): bmwsparkplugs.com/collections...
Here is the code reader we recommend everyone to have handy to self-diagnose car problems: MotoPower OBD Scanner: amzn.to/3OaSiCC
If you would like to read more about BMW’s VANOS system, we have an article on our BMW Tuning website: bmwtuning.co/diagnosing-a-fai...
Tools we recommend having for your vehicle at all times:
Air compressor: amzn.to/48gnZ3W
Battery charger/jumper: amzn.to/4bN2jQe
Electric ratchet wrench: amzn.to/3wfG2u1
Digital multimeter: amzn.to/3UFyA5I
Dewalt flashlights: amzn.to/42G6edd
Flex-head ratchet wrenches: amzn.to/3SydrHM
Grease monkey disposable gloves: amzn.to/3wghbX7
Magnetic pick up tools: amzn.to/3uwT0D4
Rollet seat: amzn.to/3up8QzN
8020 Media Website:
8020media.co/
Check Out Our Portfolio:
Tuning Pro - tuningpro.co/
BMW Tuning - bmwtuning.co/
Diesel IQ - dieseliq.com/
Chevy Trucks - chevytrucks.org/
Volkswagen Tuning - vwtuning.co/
Porsche Mania - porsche-mania.com/
Muscle Car Club - musclecarclub.com/
New Videos Every Week. Subscribe so you don't miss a video!
►Subscribe Here: bit.ly/3xtNUph
---------------------------------------------------------------------
What is 8020 Media?
8020 Media owns and operates a portfolio of content websites and eCommerce stores in the Automotive industry. We provide over a million monthly readers with high-quality automotive content, focused predominantly on technical and performance modification guides.
---------------------------------------------------------------------
00:49 - BMW Engines That Use VANOS Solenoids
01:16 - What is VANOS & How Does it Work?
02:30 - How VANOS Solenoids Fail
03:05 - Symptoms of a Failing VANOS Solenoid
03:49 - How to Diagnose a Failing VANOS Solenoid
03:57 - Specific VANOS Solenoid Engine Codes
04:10 - Possible VANOS Solenoid Engine Codes
05:25 - VANOS Solenoid Replacement Options
07:08 - Signs & Symptoms of VANOS Solenoid Failure Outro - ยานยนต์และพาหนะ
Explained everything very thoroughly. Thanks for the insight and your time for making this video.
R - Thanks for the feedback! We hope it was helpful.
Great video many thanks.
P - Thanks for the feedback! We hope it was helpful.
thank you for the brief explanation much love from State of Kuwait
A - Thanks for the feedback! We hope it helped.
Thank you for your help in explaining the symptoms of this trouble. Well done video! A couple of things to note. The S54 doesn't use those solenoids. As well BMW doesn't Use "P" codes. Generic readers use them and they are fine except when we're using the actual BMW reader we won't know what you're codes mean as we don't get them.
F - True. Thanks for the feedback and sharing this insight!
but if you are using a BMW specific scanner, wouldn't it define the codes for you anyway?
Thankyou for your knowledge and help 🙏💜☮️
Eye - Thanks for the feedback! We hope it helps.
Eye - Thanks for the feedback! We hope it helps.
Hey man thanks so much for this video , have a e92 n54 , car just randomly threw up 2A82 , 3100 boost deactivation today , had alittle bit of white smoke for afew seconds from both exhaust , car instantly went into limp mode
M - Sounds like a Vanos issue. Keep us updated.
thanks for this. my n63tu went in for a misfire. need to check one of three things, oil in the solenoids, solenoids and the actuators
F - Thanks for the feedback, we hope it was helpful. Keep us updated!
Thank you for the awesome video! I have a 2009 328i E92 with N52 engine; it runs really well, for 201k miles but, it now, kind of vibrates on idling and I got a 2A87 - "DME: Exhaust VANOS mechanism" code; thanks for the valuable info; I'm sure I need to replace the solenoids
Yepp likely the solenoids giving you trouble! bmwtuning.co/product/bmw-vanos-solenoid-n52-n54/
informative! thanks alotw
S - Thanks for the feedback! We hope it helped.
Seems like adding a cleaning agent to oil before changing to help remove sludge….would be wise just for the solenoids
Thank you, imma clean mine, the buy some maybe a week or 2 later, just need to know what the actual problem off
T - Thanks for the feedback. Keep us updated here!
i had a N54 exhaust camshaft sensor / vanos error code. did a liquimoly oil additive cleaner and oil change, also cleansed the two non-return valve metal filters under the right wheel well. seems to have solved the problem. got new vanos from FCPeuro, but have not installed them yet, as i have not had any further issues. i do my oil changes every 10k km.
I - Thanks for taking the time to share your experience!
THANK YOU SO MUCH FOR THIS VIDEO. I have a question my car has p0015 code. I was looking for symptoms of this vanos sensor and none of the videos mentioned a horrible squeaking noise my car makes. At the same time the noise starts the car loses power and it runs off. will changing this sensor help??
Have you noticed any trends with when the noise starts? Is it completely random or does it start after you do something? Like give it gas, turn the AC on, etc.
Hello , I have a 28a3 code intake Vanos , I have checked my oil filter housing it’s not cracked. I have 2006 n62 , on start up I have a 2 second oil light then it doesn’t come back. Do you think it may be the 6 non return check valves or just a solenoid.
W - We would guess it's the solenoid.
could a failed vanos solenoid cause the engine to stall? i replaced both cam position sensors in my 99 328i but no have no power in low rpms and a stalling issue.
Wizard - Certainly could!
My n52 which clocked 220k km in milleage has weak power deliver, had catalyzer flush by pro shop and cylinder head clearance done a month ago, no fault code.... Scratching my scalp now... Any advice ?
T - We have a video about losing power that we hope can be helpful: th-cam.com/video/ipjYLPJgpq8/w-d-xo.html
Is there a difference between the n54 and n55 solenoids? Apparently the n55 is an updated version but i wonder if they're interchangeable..
They are different (and more expensive for n55) but I've never tried switching them out. Haven't heard of anyone that has but all of the aftermarket manufacturers too have different part #'s for N54 and N55 so that's a pretty good indication that there is something different enough
@@8020Media They are not interchangable
BMW 130E20 CODE, P1338, Intake Camshaft Angle Deviation with respect to crankshaft outside tolerance, what would you suggest for this, my timing chain and everythign was done only 30k miles ago, im confused
Lmk if u fix it, I have the same problem 😐
@@ricardomejia5804 what have your mechanics said?
I'm looking to buy a 2004 525i with an N52 engine which they reckon smokes a bit, could this be a symptom of a VANOS system problem too? TIA
G - It's possible. But could be a wide array of other things.
Can you have this issue on n55 without a code popping up?
B - This is definitely possible, but rare.
Hi. my N52 with 200k kms is weak, high consuptions and jerking at low rotation (form 800 to 1,5k rpm). But no alarm in BC and by diagnosis (no codes you showed), how come?
Punnie - Do you have any codes at all? Have you scanned for them?
@@8020Media i scanned by DeepOBD. I have to try with ISTA?
I think my PCV has some problem because when I open the oil cap I hear a strong suction of air@@8020Media
Due to high blow-by the oil vapors get dirty the NOX sensor and get lean carburetion. The engine is at end of life @@8020Media
Hello, I have a 325i 2010 N53 slows down unstable and shakes when cold, it lasts 1 minute and afterward the car runs very well. When she does that I accelerate slightly and that prevents the shaking and slows it down unstable, do you have any idea, said the vanos? No smoke, no smell of gasoline. New spark plug and coil. I'm French, sorry for the translation.
I have the exactly same issue on my 2010 N53. I have replaced all 6 injectors, spark plugs, coil packs and PCV, still getting the intermittent lumpy idle.
@@Holdeenio Vanos and filter for vanos ? Admission d'air and disa ? How much did you pay for the injectors, did you do the adaptation mode? Before changing your injectors, the exhaust smelled of gasoline, was there smoke?
Definitely change out the vanos solenoids before jumping into anything crazy expensive like fuel injectors. Sounds like it could definitely be the vanos causing those problems.
@@8020Media Thank you very much, yes from the least expensive to the most expensive, continue the videos, I don't know if you talked about the vanos filters, a video on them would be good.
94 - Thanks for the feedback! We will add it to the list.
What about a 28B8 code, would that relate?
D - Yes.
Hello i have a 06 bmw 330i and the rpms have been fluctuating after i replace my ccv system and when i ran it on mycarly my car was pulling throttle valve codes, throttle valve adaptation, vanos code and a cps code as well. I replaced the battery the throttle body and the maf sensor i just recently put in a new camshaft position sensor. I started the car and it was kinda still fluctuating up and down. Ive been trying to figure this out for a few months now i have a vanos solenoid code but i want to know would the solenoids be the reason of why the throttle codes are being pulled.
Astro - Definitely possible. Think the best thing to do would be to clean the VANOS solenoid to see if that alleviates anything. Keep us updated.
I will be im getting the solenoids tomorrow
But ima gonna clean the ones already in there today
Astro - Keep us updated. Hopefully this alleviates your issues.
If the 06 is a M54 engine it doesn't have solenoids
I've got the x5 4.4 50i..and my exhaust solenoid is bad..limp mode
N - Sorry to hear! We hope this video helps you.
How many vanos are on a bmw 2013 750li
4
4
V - Thanks for helping him here.
2 exhaust 2 intake
What about GAITS or VAICO brand?
Vaico had a ton of quality issues - we used to sell a ton of them but ended up having some big quality control issues so wouldn't recommend them anymore. Gates is solid quality
@@8020Media awesome, thanks!
2006 330i n52, idle is jumping little bit, sometimes shakes after start for bit, here is what is done
1. changed spark plugs and ignition coils
2. cleaned throttle body
3. cleaned check valves
4 just changed vanos solenoids as well.
No Vaccum leaks
car runs fine but idle issue not going away, what could be the issue?
Two questions: Do you have a CEL? How many miles?
@@8020Media no CEL, 81k
Same thing’s happening to my 2007 120i. Does your car misfire when stopping then taking off?
Sounds like a rough idle. We have a video dedicated to this that we think will assist: th-cam.com/video/BiYsqRJCLhE/w-d-xo.html
Keep us updated.
Fuel pressure ? Koeo and when accelerated ?
Maybe idle air control valve stuck , leaking intake gaskets ( same as vaccum leak ), throttle position sensor ..plugged egr ...just a couple more things to check@@lisha8724
Don't foget N63
N - Thanks for sharing!