Man I been messing around with my 584 for 3 or 4 years trying to get the 3 point to work right, doing pretty much the same as yours it would move full range with the draft but maybe just a 1/4 the way with the lift leaver, I've had a couple filter changes an O rings here and there . I hooked to the plow this spring and it quite lifting all together, so I'm going to rip the covers off and follow your lead . Thanks for the help I thought I was the only one with hyd oil dripping in my ear and not gaining on the problem. Up in western Pennsylvania woods. Thanks again
Hi there, nice videos, one can learn a lot... I've an IH784, had some troubles with the hitch, changed oil, changed filters several times. Now it is working fine. I feel like it won't go to the topmost position. How close to the gas tank should it go?
If you pull the draft control lever all the way up it should reach its top most position. If the lift lever is lower than that you need the tractor service manual so you can adjust the linkage inside the housing. It's a big job to make the adjustment.
Hopefully I can hear from you soon. I have a case international 495 and my 3 point does not work properly it only goes half way up. What do you think it could be ? Thanks for the videos they really help.
Your auxiliary lines coming out the back pull the lever up and hold it for 10 seconds, You're just giving it all the pressure available. It sounds like the internal linkage needs adjustment. Adjustment is not simple or easy. You need a copy of the procedure from a service manual, and you have to remove the top cover of the differential to do it. My tractor isn't exactly right either. For normal use I use the position control lever. When I need the extra height I use the draft control.
Thank you for the thorough videos
Man I been messing around with my 584 for 3 or 4 years trying to get the 3 point to work right, doing pretty much the same as yours it would move full range with the draft but maybe just a 1/4 the way with the lift leaver, I've had a couple filter changes an O rings here and there . I hooked to the plow this spring and it quite lifting all together, so I'm going to rip the covers off and follow your lead . Thanks for the help I thought I was the only one with hyd oil dripping in my ear and not gaining on the problem. Up in western Pennsylvania woods. Thanks again
You're very welcome
Great video! I think I have the same problem. Thanks!
Good day Glad you got it working. Now do you think there are more like that. Mine lifts pretty good. Thanks Anymore 484 vids.
There are several. It makes regular appearances.
Hi there, nice videos, one can learn a lot...
I've an IH784, had some troubles with the hitch, changed oil, changed filters several times. Now it is working fine.
I feel like it won't go to the topmost position. How close to the gas tank should it go?
If you pull the draft control lever all the way up it should reach its top most position. If the lift lever is lower than that you need the tractor service manual so you can adjust the linkage inside the housing. It's a big job to make the adjustment.
Hopefully I can hear from you soon. I have a case international 495 and my 3 point does not work properly it only goes half way up. What do you think it could be ? Thanks for the videos they really help.
2 questions. Does it lift higher when you move the draft control all the way to light? And does it raise higher when you deadhead the remote?
@@rivervalleyfarm482 yes it does go higher when I move the draft control to light
And i apologize what do you mean by deadhead the remote ?
Your auxiliary lines coming out the back pull the lever up and hold it for 10 seconds, You're just giving it all the pressure available. It sounds like the internal linkage needs adjustment. Adjustment is not simple or easy. You need a copy of the procedure from a service manual, and you have to remove the top cover of the differential to do it. My tractor isn't exactly right either. For normal use I use the position control lever. When I need the extra height I use the draft control.
My 684 will move up and down fine unloaded but loaded it won’t go down? Any suggestions?
@isaacjones3198 that's an odd one. Move the draft lever up and down see what happens. It might require internal adjustments.