AIT induction - Hot Air plastic repair - Collision Repair Line
ฝัง
- เผยแพร่เมื่อ 19 ก.ย. 2016
- Ideal for repairing and renovation of damaged bumpers in a very easy and fast way.
Product page:
www.ait-induction.com/product...
You can easy repair: car bumpers, plastic parts or interior parts, etc
HOT AIR allows you to carry out plastic welding using a jet of hot air that fuses the plastics strips that get welded and fixed together on the unit. Practical and easy to handle, it is fitted with a flow regulator. In this way, the damaged parts are welded together in a lasting manner, thus avoiding the expensive replacement of the piece.
Design: portable desktop.
This project is very good!
플라스틱 용접 신기합니다.
좋은기술 보여 주셔서 감사합니다.
We have one you use plastic sticks and stick it through a hot tip. Can actually make it look like a stack of dimes with it.
👍👍👍
Nic work
Soldering iron works just as well just prep the surface with some sand paper and use the tip of the iron to push little waves into the plastic about 1mm apart then lay all of them flat to join, i have used this method and its worked 100% every time even joining a motorcycle front mug guard together which was in 2 pieces if needed drill a few holes for some small cable ties to hold both pieces together and filler over them after
I know im asking randomly but does someone know of a trick to get back into an instagram account?
I stupidly forgot the account password. I would love any tricks you can give me
@Keanu Rodrigo i really appreciate your reply. I got to the site thru google and Im waiting for the hacking stuff now.
I see it takes a while so I will reply here later with my results.
@Keanu Rodrigo it did the trick and I now got access to my account again. I'm so happy:D
Thank you so much, you saved my account!
@Ahmed Malakai Happy to help :)
That's what I use, or sometimes a heat gun and flat head screw driver if you're planning on a complete refinish.
I use solder iron tips on hard cracked plastics. Hit it at 450 degree, go one pass deep/to the other end but not through, making a wake on each side. Do another pass folding the wakes down. Do a last pass to smooth out the surface. If you sand it it will look "like new" :-) Has never failed and done it like 10 times. Coolers, just cover parts and other stuff.
Hello. Please tell me where I can buy this material (white plastic).
O well in reaction to all the negative posts i can say this is a great bit of kit
i bought one a year ago, much cheaper than a nitrogen welder for pretty much the same result " a good strong weld"
This model appear to have bespoke design in the welder pistol as it gives of very little smoke in comparison to other welder.s
This is a welder !!
To create a weld one must melt the base material and fuse it with the filler rod, this is how plastic is welded
the same basic procedure as welding metal.
Though in this video a larger V groove, should have been created in my opinion. and the plastic should be cleaned with a pre cleaner to remove any contaminants.
Some plastics polyurethane for example cannot be fusion welded and do following a procedure like brazing
Finally, here is a positive comment. Yeah, this is a really nice technique and easy to use but some idiots just don't understand.
sir, This is hand welding????
It's not a plastic weldel. Plastic welder melts parts to join them together, and this thing, it's close to brazing, but not welding
More like glueing... but nothing like welding
You ever seen a tig welder before?
Anderson B what's the point?
colonel butthurt, i think the point was very clear.
lambbosbread which one?
Sarya stick kahan se milegi
Mucho pes para un pedasito
In india you can get it done from any body mechanic for INR100-INR200
But why do you use than teeny tiny hot air attachment???
Dear Sir,
we want to "focuse" the heating in one specific point; we can regulate the ATM but the size of the "hot air" is standardized.
Machine ka price kya hai
Lets make a cheap and very noisy hot air station, bundle it with some plastic strips and sell it for big money to car body repair shops
Dear Sir,
even if it's not a polite way to describe the tool, I assume that you are not aware of the cost of it. Concerning the noise, we have decided to record a realistic video without any music in order to show to the customers its real capability. I thought you might appreciate. The different kinds of plastic stripe ( PP,ABS, PUR etc ) may be chosen according to the kind of car body that you nned to repair and that's very important.
Info Albatros 300 dollars for a decent and quiet 1000W hot air station.
كام السعر
holy crap you really like the title feature in your editor
Just looks like repurpose solder reflow station. Its not a weld though, your not fully bonding or mixing the filler materials.
Dear Sir,
we use the same "material" of the car body in order to properly fix it.
As an example...if the car body is made of PP, we use stripes of PP, if it's ABS, we use stripes of ABS and so on.
That's the onbly way to get a high standard result and proper repair.
That has really nothing to do with my comment but oooook. o.O
@@nikushim6665 it is certainly welding. It isn't like other weldijg because its the exact same material being bonded by heat. It doesnt need to mix to be welding
How is that unit any different than a electronic hot air station? I would imagine that unit is significantly more than $400, which is the cost of a good quality hot air station capable of reaching temperatures of 500º C.
BTW, your caption should read "without smoke or burning", not "without no smoke and no burning".
Dear Sir, first of all we thank you for your enquiry. We have developed this item to be used with plastic stripes in order to repair the broken plastic car bodies. The unit is able to reach high temperature in order to melt properly the plastic stripes and do a proper job.
We are not yet selling this product in the american market so we can provide to you any info concerning end user price list.
Any suggestion is always welcome.
Thank you for your attention.
If you have any enquiry, feel free to send us an e mail.
Thanks
Albatros Team
Inquiry**
@ Shadowcruise99
I bet you get the same result with an electronic hot air station.
Enquiry
pollymorph?
Dear Sir,
we adopt different kinds of stripes like PP, ABS, PUR according to the car body's material
Nice Asmr video . Haha
how much does this cost? where can i purchase?
Dear Sir,
thanks fro yoru enquiry and interest upon our item.
In order to support you, recommending you a reseller, could you be so kind to provide us more info of yoru location ?
We thank you and await for your kind reply
Albatros Team
I am residing in vancouver canada. What is the unit called?
Dear Sir,
thanks for your quick reply!
Actually we have not yet distributors in your country.
Could you be so kind to send us an e mail ?
info@albatrostrade.com
so it could be easier for us to interact.
I thank you and look forward to write you back soon
Albatros Team
This looks so similar to Chinese hot air soldering stations. Most probably a rebranded chinese
Looks more like hot glue than welding. At no point did the body panel or the glue strip melt into each other. Not saying it won't hold... just that it's not welded.
Dear Sir,
we don't adopt a standard glue to fix it. We adopt specific kind of stripes accoridng to the kind of car body. As an example, we adopt PP stripes if the car body is made of PP. That's the best way to achieve a high performances in terms of resistance and durability. We "dig" a V in order to provide to the stripe more surface to be set in contact with.
made in italy i think its broken
funny how the video ended short after you hear the sound of ripping plastic XD
Dear Sir,
the stripe doesn't rip.
After every repair, in order to be able to properly paint, brush, cut it, we'd better wait at least 5 min.
lmao you start to hear it break then the video cuts off
Dear Sir,
we wanted to show the resistance of it. believe me, it doesn't break and the video hasn't been cut!
its not got enough ur plastic welder.
Dear Sir, in order to understand better your point of view, could you be so kind to xplain us the reasons of your point of view ?
Thanks for yoru attention, we remain at your disposal
Kind regards
Albatros Team
waste of time.. use more zipties
Dear Sir,
by using the zipties, these may break and air may pass through..
By adopting the specific kind of stripe, like ABS, PP , PUR etc, you properly fix it, granting a high performance in terms of resistance and durability.
Info Albatros dude just put some duck tape on that shit and call it a day
Dear Sir,
we are just providing specific infos and answers. I just thought you might appreciate that.
If not, we do apologize but we don't switch our vocabulary neither minimize the will and pleasure to provide worthy reasons for such a tool to other customers.
zipties look way cooler anyways
Zip ties are for rookies, rivets and tin sheet are were its at.
John mounted the piece back into the car and delivered it to Andrew. After a couple of miles the piece broke again and crashed into the front window. Andrew died that same night.
So basically its a gluegun
Glorified hair dryer for numpty!
Dear Sir,
i't not a glue gun. We adopt the right stripe for the specific car body in order to properly repair it. As an example we adopt the PP stripe for car body made of PP and so on. That's the right way to achieve the high performances in terms of resistance and durability.
Tig
Hiiii
Made in Italy? Looks more like the typical "made in china" case+ nozzle... can you open it up and show the inside?
you know I bought my hot glue gun for 3 dollars. I am just saying.
Dear Sir,
the secret of getting a real high quality result is to use the right kind of stripe for the right car body. The "glue" is standard; we have different choices like PP, ABS, PUR according to the customer's needs.
Who would tell someone they put hot glue on there vehicle and brag to someone who does it the correct way?
@@aitinduction-poweredbyalba1207 hot air plastic welding machine how much
Do you even know the definition of welding?
Its the joining of two or more pieces of metal.
@@rossthumann4996 doesnt have to be metal.
hahahahahaha "expert" guys
thats an expensive heat gun
Dear Sir,
we don't believe that it's expensive. You have to evaluate that we adopt different kinds of stripes for the right kind of car body in order to achieve a high performance in terms of resistance and durability.
I fucking hated when you started scraping that plastic.
Dear Sir,
we wanted to record a realistic repair; that's the reason why we have not added any music / sound!
Italy haha
the sound is so cringy
why?
Dear Sir,
we attempted to create it in a realistic way. No music, no photoshop, just a real fix with its sound of tools.
i understand. i just described sound
Contact no dijiye
Aap apna Naam mobile number dena
Bhai mrp Rs kitna hai chahiye hame 7860854221
This looks useless, just melt the plastic together, no scraping no strip.
Dear Sir,
if we don't "dig" a V in order to let the melted stripe flow inside, we don't achieve the same reult in terms of performances and resistance. We adopt the right kind of stripe for the specific car body. As an example PP stripe for the car body made of PP and so on..
lot of over engineering and waste of money for much simpler fixes
lol that was not how u do it :D
waste of time
Araldite is faster better and cheaper!
Dear Sir, Araldite is a special glue and reconnect broken spare parts!
We do supply and melt the plastic stripes to join the broken plastic parts.
Pay attention that we do supply different types of plastic like ABS, PP, PUR etc
That's the main difference
I use a glue gun, much quicker, easier and cheaper!
Dear Ann,
the glue is a standard solution.
We do supply the right kind of stripe for the right kind of car body. As an example the PP stripe for the car body made of PP, the ABS stripes for the carb body made of ABS and so on. Some we use the same material for reparining.
and also 1000x more inferior, you forgot that part
Gee man so much time to do a crappy job, pay me a months wage and my ticket i will come teach you the best way, faster,stronger and also teach you to do small pieces that you cant do with your equipment.
Wtf get the fuck out mate noisy machine ....any electronics repair hot air gun will do better, you just need a bit of some other bumper to cut stripes
👍👍👍👍👍