Up where I live in Michigan a local Amish rolls metal roofing. While getting my roof made he walked through his entire setup and allowed my daughter cut a sheet. Made her day. He has been in busy for 25yrs now. His quality is better than the store roofing and can get it ten times quicker too.
This is a good book. Does provide a step by step introduction to how to build things th-cam.com/users/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 , also does offer some steps. Includes pictures to give you ideas for layouts and such. If you are looking for a guide, this is not exactly what you want. But if you are trying to familiarize yourself with the way that pole barn building and other out buildings, are made, then this will work just as you need it to. A few things in this book are a barn (of course), detached garage, storage building, and coops.
Trim Folder is Variobend USA Slitter Coil Farm is Slinet Awesome products! Variobend USA is made in America and Slinet is made in Germany. Both machines communicate with each other and your pc or tablet. V-Link was awesome. They stole the show. Great Content! Love this video!
Love to see our machines out and about, especially with our friends at Formwright! If you decide you want to do that video about portable rollforming, we can make it happen! -Katie
This is great. I remember my uncle with a big red box truck that was loaded with rolls in the front, and just watching him roll out gutters and flashing was incredible.
I saw that ladder. It is definitely the trick for steep standing seam. I also love their standing seam trim. You are able to trim your whole job before panels are laid.
I've noticed the roofers who can't roll form their own panels are just not competitive in pricing versus those who can. When you're buying per-formed panels from someone else you're paying a mark-up. If you're doing standing seam roofing you have got to get a roll former.
This is true ‘green’ tech.. all the material you shown are actually recyclable and sustainable versus the crazy high tech stuff shown on so many shows.
i did find it was cheaper to buy the machine to have them make it and the delays they did too i am able to make my own panel too i have paid this off in 2 years too
My roof was done by a machine like that on an open trailer, they did my entire roof in hours, it was crazy! I asked him why the job was so expensive when it was so fast? He told me the trailer was over $100K and then he told me what the coils of metal cost - yikes!
In the Netherlands we produce all the material prefab at the workshop and transport it then to the construction site. The machine we use is from schlebach quadro and schectel, i work with them for many many years.
@OfficialRRBuildings Thanks Kyle, The only problem is that telegram does not mean much to me in the Netherlands otherwise it is unknown to me. Continue with these topics and tool topics from time to time because I love that.
Pretty cool technology and I'm a 100% metal roof devotee...once you've installed it or had it installed on your roof(s) it's really the only way to go for many reasons IMHO. That said, trying to compete with 'the big three' like Metal Sales isn't that difficult to do? Or, would this be more toward a more custom niche? Amazing amazing stuff.
Competing with the big three like you said will be nearly impossible. They have shipping contracts and 100s of millions of dollars worth of equipment that make it a lot cheaper to manufacture than you can. Your advantage is that a contractor can come to you with their spec and you can have their order done the next day. People will pay a premium for locality, speed, and relationship.
@@scuph I think you're right:). Yeah, that niche might be really good for some people in some areas and for people who like to 'bend metal' it might be great being ones own boss etc. And, I do think more and more people will move to metal roofing IF the prices can stabilize.
@@leozmaxwelljilliumz3360 While not saying you're wrong - that does surprise me. Typically when they negotiate purchases from the larger companies those companies don't then sell to individuals. I guess you're lucky it is in your area.
So this is a mobile version of Menards from 1972. This is nice but I only do 2-3 metals barns a year. Now if I can have a machine that makes cement siding on demand, that’s something I would invest in.
1/4 of the event attendees are amish or Mennonite. They've kinda took over the post frame labor at least in ks ne Iowa it seems. Nobody wants to build anymore, just sell steel and trim. Lol
Everyone needs a siesta, after that joke I think you’re obligated to get a 5th wheel as Greg’s new nap place. Also, it was sort of funny seeing a fake plant in the trailer, weird marketing choice. Either way, it’s always awesome to see better tools that help us build better faster!
for that trailer how big of a roll can you put in it and how many feet can you get out of that roll? you have to ship the rolls to the site and unload them.
Trim Folder is Variobend USA Slitter Coil Farm is Slinet Awesome products! Variobend USA is made in America and Slinet is made in Germany. Both machines communicate with each other and your pc or tablet. V-Link was awesome. They stole the show.
@@tallswede80 Well first of all it’s a joke but around here the best prices for steel roofing are generally from the Amish. They fabricate it on demand usually within a 24 hour period too. It was a joke only though.
Up where I live in Michigan a local Amish rolls metal roofing. While getting my roof made he walked through his entire setup and allowed my daughter cut a sheet. Made her day. He has been in busy for 25yrs now. His quality is better than the store roofing and can get it ten times quicker too.
That's how we do it here in rural ohio as well. Its nice to put your bottom and top in place and have perfectly cut pieces.
I'm in the metro detroit area, mind sharing who your roofer is?
@@eks007 a local Amish crew did my roof. They stay local.
This is a good book. Does provide a step by step introduction to how to build things th-cam.com/users/postUgkxhgbP-6hUnXu_QRaoHgLztgsI0YF3HqR0 , also does offer some steps. Includes pictures to give you ideas for layouts and such. If you are looking for a guide, this is not exactly what you want. But if you are trying to familiarize yourself with the way that pole barn building and other out buildings, are made, then this will work just as you need it to. A few things in this book are a barn (of course), detached garage, storage building, and coops.
Trim Folder is Variobend USA
Slitter Coil Farm is Slinet
Awesome products!
Variobend USA is made in America and Slinet is made in Germany. Both machines communicate with each other and your pc or tablet. V-Link was awesome. They stole the show. Great Content! Love this video!
Huhuh...he said "slitter"
Love to see our machines out and about, especially with our friends at Formwright! If you decide you want to do that video about portable rollforming, we can make it happen! -Katie
How can i contact you?
this company need for you to have and promote it almost as much as you need it!
This is great. I remember my uncle with a big red box truck that was loaded with rolls in the front, and just watching him roll out gutters and flashing was incredible.
I saw that ladder. It is definitely the trick for steep standing seam. I also love their standing seam trim. You are able to trim your whole job before panels are laid.
I've noticed the roofers who can't roll form their own panels are just not competitive in pricing versus those who can. When you're buying per-formed panels from someone else you're paying a mark-up. If you're doing standing seam roofing you have got to get a roll former.
Kyle and Robert - two guys who obviously take pride in the fruits of their labor. Awesome!
Yeah..holy shit...imagine if everyone was like these guys !? Even half of em...we're doomed
That W valley is awsome (about 8:08.). Two water stop folds on each side in addition to the center ridge.
Wow… Really Efficient
This is true ‘green’ tech.. all the material you shown are actually recyclable and sustainable versus the crazy high tech stuff shown on so many shows.
I am not in any trade and only understood about 10% of all that but its all amazing. In 10 years building a house is going to look so different.
Wow….that Variobend was amazing. The Slinet too!
Absolutely! Great product !
Wow… Is right!
That variobend is freaking awesome!
American Made! USA!
And thank you Kyle for showing us! 👍😁
Best choice I made the machine was expensive but I made it back quick
what an awesome array of tools and setups... cheers Kyle..
i did find it was cheaper to buy the machine to have them make it and the delays they did too
i am able to make my own panel too i have paid this off in 2 years too
Where did you buy from?
My roof was done by a machine like that on an open trailer, they did my entire roof in hours, it was crazy! I asked him why the job was so expensive when it was so fast? He told me the trailer was over $100K and then he told me what the coils of metal cost - yikes!
We use them ridge ladders on almost every roof in Uk, I’ve worked on tiled roofs at 55degrees, there’s no walking up that safely !
I would love to see more machine forming action.
In the Netherlands we produce all the material prefab at the workshop and transport it then to the construction site.
The machine we use is from schlebach quadro and schectel, i work with them for many many years.
@OfficialRRBuildings Is this spam Kyle or serious?
@OfficialRRBuildings Thanks Kyle, The only problem is that telegram does not mean much to me in the Netherlands otherwise it is unknown to me.
Continue with these topics and tool topics from time to time because I love that.
This actually makes a lot of sense and I think us will eventually do that as well. But last mile transportation is expensive.
I wouldn't like to meet Nelson on a bad day :)
Here's a million dollar idea for you. Make custom valley pieces.
Central States out of Jasper Alabama Makes a cool ss valley!
Pretty cool technology and I'm a 100% metal roof devotee...once you've installed it or had it installed on your roof(s) it's really the only way to go for many reasons IMHO. That said, trying to compete with 'the big three' like Metal Sales isn't that difficult to do? Or, would this be more toward a more custom niche? Amazing amazing stuff.
Competing with the big three like you said will be nearly impossible. They have shipping contracts and 100s of millions of dollars worth of equipment that make it a lot cheaper to manufacture than you can. Your advantage is that a contractor can come to you with their spec and you can have their order done the next day. People will pay a premium for locality, speed, and relationship.
@@scuph I think you're right:). Yeah, that niche might be really good for some people in some areas and for people who like to 'bend metal' it might be great being ones own boss etc. And, I do think more and more people will move to metal roofing IF the prices can stabilize.
Lowe and home depot Both buy from a local metal company and resell it in my area. Super funny when you get it 30% cheaper directly from the company
@@leozmaxwelljilliumz3360 While not saying you're wrong - that does surprise me. Typically when they negotiate purchases from the larger companies those companies don't then sell to individuals. I guess you're lucky it is in your area.
So this is a mobile version of Menards from 1972. This is nice but I only do 2-3 metals barns a year. Now if I can have a machine that makes cement siding on demand, that’s something I would invest in.
Wow that's awesome! Robots are talking over
Didn't expect to see the Amish ladies walking around the show.
1/4 of the event attendees are amish or Mennonite. They've kinda took over the post frame labor at least in ks ne Iowa it seems. Nobody wants to build anymore, just sell steel and trim. Lol
Trailer is epic!
Everyone needs a siesta, after that joke I think you’re obligated to get a 5th wheel as Greg’s new nap place.
Also, it was sort of funny seeing a fake plant in the trailer, weird marketing choice. Either way, it’s always awesome to see better tools that help us build better faster!
My supplier still uses single trolleys on rails fixed to the floor and an overhead crane to move the reels......I have to show him your video too😂
Also....the supply chain shortage issue last year really made metal coils tough to get
What's the cost for 1,000' coils? Thanks.
Just an aside, last few videos (for me) the audio is way low, not sure if it is the mic or the production. FYIO
I wanted hemp towels man!
That is really cool. Thanks for ahowing these machines.
Have you looked at the video from Poland of a roll form of a Quonset hut section one meter wide , for a farm building 20 meters wide ?
Does anyone know where you can buy those machines by chance? Would love to start rolling my own sheets for our shops we do
That's an amazing machine
Nice good 👍 job thanks men
Hi brother thank you nice machine but how mach is this.mechine can cost please
Almost there 315 to go
for that trailer how big of a roll can you put in it and how many feet can you get out of that roll? you have to ship the rolls to the site and unload them.
2200 lineal feet is about as big of a coil as you can fit in that machine
Make another video with this trailer on your job site.
Whats the price of this specific model🤔
awesome
I’m in. Who wants to spot me 100k?
Me first
@RR Buildings shit you got it!!! As many building videos and u tube followers, you can pay cash!! Lol
*_I have an idea for aluminum, titanium, and magnesium 3 ply toilet paper.._*
Lately your videos are quite, so I have to turn up volume and still having hard time hearing and then commercials are very loud
Do they make them in trailer for at panels and R panels or do you got a number I can call
What is the name of the machine
Trim Folder is Variobend USA
Slitter Coil Farm is Slinet
Awesome products!
Variobend USA is made in America and Slinet is made in Germany. Both machines communicate with each other and your pc or tablet. V-Link was awesome. They stole the show.
What is the cost
0:57 Houseplants placed for increasing employee productivity.
480V 3phase kind of kills the portability of this, no?
Only the first machine was advertised as portable, the other two shown aren't portable.
Oh I missed that. Thanks!
Website for the roll form trailer setup anyone?
GOOD MORNING
👍
Loo-ville??? 🤷🏻♂️
Getting hard to hear you lately. Your audio is to low
See, I always knew Canelo was pretending not to know English.
Way outta my pay grade. That is call in then pick up, equipment
if you have to ask you can't afford it
2nd
Is this guy a brother of CANELO ALVAREZ ???
You might be getting a visit from the Amish mafia.
the amish mafia. lmao thats so bizarre, its funny AF
what are you talking about? Do they have a corner on the metal roof bending market?
@@tallswede80 Well first of all it’s a joke but around here the best prices for steel roofing are generally from the Amish. They fabricate it on demand usually within a 24 hour period too. It was a joke only though.
Just a little power required....Lol
Nobody wants to work hard and build these days. Just sell metal and trim. These roll forming places are popping up everywhere in the Midwest.
What do you do for a job if you’re using any Power Tools shut the fuck up 😂😂
1st
🦾
It is more cost-effective to build a large volume of repetitive products in Asia and ship it to America.