This is fantastic. I just bought a flipper zero and the wifi dev board and I have absolutely no idea what to do, lol. I just wanted one. Thank you for making these videos.
I 2nd this. Sasquach has been invaulable to me, even though I cant afford a flipper zero i still utilize the web gui and thos channels information to educate myself.
Holy crap I can’t believe I’ve gone this many years not realizing that not all usb cables send data because they only send power. I have had so many unnecessary issues over the years using usb cables and not realizing such an obvious thing. You’ve literally changed the rest of my life in a big way. Thank you
Hey Sasquach, i rarely make comments on yt videos in general and I just wanted to say I appreciate all of your flipper videos as they are super helpful! I love the amount of work and effort you put into your videos and I love the enthusiasm you have while doing it!
I'm getting a flipper zero tomorrow this video is just in time. You are a very good source of information, and an easy and approachable channel. Keep up the good work.
I’m new to this. This was great, but I don’t know what went wrong. I keep getting an authentication error at the GitHub desktop part, however, all the files are on my desktop. What do?
Hi Sasquach. Unable to flash ESPflasher to flipper. No download option. Currently says, "Build Timeout (maybe repository is too large) Any idea what is happening? Alternative flasher recommendations?
@sidyfall5319 ordered from the official website. That's the only place I recommend ordering from to avoid scams, order usually take 2 to 3 weeks for delivery.
Hey great stuff, thank you! I got all the way to 13:41 but when trying to install the silicon labs universal drivers I get an error message "The third-party INF does not contain digital signature information". Plus, my extracted files don't show the suffix, i.e. .inf; so when I right click no option to install.
Is there anyone out there that is having the same problem I am having with going to the ESP flasher app and not seeing quick flash or the two different Firmware's
Hey I am having this issue: Connecting... Connected successfully. Try hard reset. [Object.debug:374] Finished read loop Error: Couldn't sync to ESP. Try resetting. I tried holding boot > plug in end result is still the same I also tried holding boot > plug in > press/release reset > release boot but I still get the same error. What do I need to do?
Trying to flash my wifi board through fzeeflasher and keep getting "Connecting... Connected successfully. Try hard reset. [Object.debug:374] Finished read loop Error: Couldn't sync to ESP. Try resetting." When I plug the board in (holding the boot button) there are 3 choices for the comport connection. Blackmagic ESP32 (Com 3), Blackmagic ESP32 (Com 6) and Communications port (Com 5)
is the devboard plugged into the flipper? I had this issue and it was because I had it plugged into the flipper so I unplugged it and connected just the devboard to my pc and it worked
Love the info but question, you install esp flasher BEFORE you installed rogue master. Does that mean if I follow your video step by step and install esp flasher before rogue master, then do I need to go back to flipc and then reinstall esp flasher with the rogue master firmware chosen?
hello i have a question can you hack other bluethoot boxes with flipper zero e.g. wonderboom you see on the internet? my intention behind it is that i want my peace at the lake and can listen to the birds and the water and not the music of the children is this possible ? can you make wine instructions for it doesn't matter to me if i have to buy amplifiers ;) thanks in advance
I hope to George Clooney himself that my beard game is anywhere near as sleek as yours. Mad respect for the care you put into yourself as well as your subject matters, bud! If you're a sasquatch, we should all aspire to become the missing links!
Why installing Roguemaster before XFW if the latter is already based on the first one? Also, the reason you got the first esp32 installation wrong was the firmware version (you had a RC version of OFW but you selected unofficial.)
I followed everything and it worked perfectly (I flashed Xtreme) but then a day later I wanted to check RM so I flashed that but now when I reflashed Xtreme I no longer see the option the flash either Marauder or Evil Portal I only see one option which is Marauder (has Evil Portal).
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
I wish mine had asked me that. Plus, the firmware updates change so rapidly that these videos no longer work by the time they're uploaded and viewed. He goes into the weeds on the reg instead of first SSSSSSSSSSSLLLLLLLLLLLLLOOOOOOOOOOOOOWWWWWWWWWWWWWIIIIIIIIINNNNNNNNNNNNNNGGGGGGGGGGGGGG DDDDDDDDDDDOOOOOOOOOOOWWWWWWWWWWWWWWWNNNNNNNNNNNNNN and going step by step using ONE METHOD...and not well here's fifty other ways but anyway anyway anyway. Oh you got an error? Good luck noob.
@@thelockpickinglebowski633 Everything worked for me exactly as he showed it and I didn't find any problems following along. Since then I flashed several different FW just to see the difference but I suspect I'll settle for Xtreme in the end though at the moment I'm playing around with a Dev of RM that I downloaded straight from their Discord.
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
I have a problem using the esp flasher... It can not parse the file... I don't work at all so I have to flash my esp with a computer... Any Recomandations ?
When I try to quick flash both Marauder + Evil Portal, flipper says "cannot open file" with a picture of an SD card? Did I do something wrong? Update: I also tried different SD cards and installing both on the WiFi Dev board. Still same error.
i get the same. I thought it may be the Flipper update is newer than the ESP Flasher... which may require an update to ESP Flasher. HOWEVER, this is simply a guess on my part.
Hi man, perfect guide 👍🏻 Thanks a lot. One question please - since I made your update I cannot find Flipper on iOS17 between BT devices .. no more connect with iPhone.
Hey Sasquach, I just got my flipper and I am following this guide after watching a ton of your videos. I just got the repository and now I am on the custom firmware part. I watched a lot of videos on unleashed and extreme (not sure if they are the same thing). At least from a video standpoint I'm not entirely sure what the advantages/ disadvantages are to switching to a custom firmware. I'm assuming the stock and custom still pull from that repository?
I know you just made this video but can u make an updated video plz some stuff isn’t working the the esp flasher and I have a WiFi board that saying I can’t use it unless I updated it. I skipped the esp flasher download at the start because it wouldn’t download with none of the links but I did ad the customer firmware
Your a friggin absolute g and I love your vids and EVERYTHING about them. Your vids have made an idiot like myself into a learning machine ! This stuff was so native and different too me. Your vids really helped.
Just heard you on the HACK'D podcast, dude, your amazing! I had no idea how much fun my flipper could be! I know it's not a hard core hacking tool, but it's definitely me a lot about the hardware side of infosec. Your presentation is awesome as well, great channel, Thanks!!!
I installed Xtreme and then added files to the SD card from GitHub. I was prompted if I wanted to merge files and selected yes, did I pick the right option or should I have overwritten?
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
Downloaded the folder, have the Xtreme firmware. Just select and copy all folders/files and paste on the sd folder? what's happen with the overwriting?
hi i downloaded the files and installed them but if i try to use any it just says empty but if i look it up with the file in qflipper i can see there is items in the files ? any help would be great thanks
Great walk through, I'm just having one issue I hope you can help me with. I was also following you through your marauder tutorial and my .pcap files are empty. Any idea what I can do to get them to actually contain the data. It shows on screen it is sniffing the packets. Thank you
hey i love your video but i have a problem wile doing everyting same as you . when i lunch like you the quick flaxh of marauder an evile portal its says ’’ cannot open file’’ do you know what did i do wrong? thank you in advence for your answer and sorry for my bad english :)
Running into issues flashing to marauder with ESP flasher. Gets all the way then says using version 4.4.5 SD card not supported?? Any help appreciated.
Hello! Great video! I want a flipper zero, but I noticed that it has been in the market for some time. Do you know if a new version is coming up soon? Just to know if to buy it or wait.
FINALLY!, I am able to take advantage of this video..and all the other "starter pack" videos for the flipper. Thanks Sasquach! Dont be a skid!! Flip the planet!!
hey i done that all but the esp flasher in flipper gives me an error code after i flashed the dev board on the flipper itself. The error code is "Failed to mount the SD Card. SD Card NOT Supported". What can i do. I also do on the marauder app saved to flipper sd card
Thanks for the videos Sasquach!, I just wanted do flash my Flipper Zero Dev Board but the fzeeflasher no longer shows evil portal for selection. Any idea why?
Hi there, I followed your steps and some of the IR files like AC TV ect say failed to load? Any suggestions on how to fix this? New to flipper scene. Thanks
The rogue master firmware had a cool passport when i pressed the right key on my flipper, i then installed the extreme firmware and now the rogue master passport or pokemon dont pop up anymore. how do i change that?
Great, easy to follow tutorial. But missing some fundamental information - WHY do I want a new firmware? What does it do for me? WHY do I want to load all these git files on my device? What do they do? Or what do I do with them?
Does the FZEE flasher and flasher on the Flipper Zero support only the wifi module sold by the flipper zero store or can you flash any ESP32? I have a Freenove Esp32-s3-wroom cam board and was going to try and use it with my Flipper. I tried to get it to work a few months ago but had to put it aside or chunk it due to irritation. Any advice and/or help would be greatly appreciated! Also, thanks for the videos.
Quick question, I merged these files over replacing but I was thinking if these were meant to be replaced over merging this move could have been a bad idea. Regards,
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
did everything but when i scan on marauder i get no results. Ive tried reflashing multiple times, even reset everything and started from scratch, same thing
Definitely sounds like the board does not have the firmware properly installed. Make if you're using FZeeFlasher, make sure u hold the boot button when you plug it in, otherwise try using the ESP Flasher app on the Flipper
i followed this guide and got my flipper all set up. but when i tried to download the android app for my phone, it doesnt detect a flipper. and i have been thru everything to try to find something that enables bluetooth or turns it on, and no luck. can you help me pls?
Hey man, I got a question. After cloning skizzophrenic/ubers-sd-files, I'll copy the files over to sd, but it only shows copying 23,806 items instead of45,555 items it shows on your video. What gives?? How can I get the rest of the files?
Great video but did run into a problem. After installing everything on the video and plugged back in the flipper said to update. I updated and now everything seems to be missing. Do I need to re format and do it again without updating the flipper?
Clicking update in QFlipper will load the latest official firmware, overwriting custom firmware in the process. Just reflash your CFW and you'll be good
Hey talking sas', I'm trying to paste Ubers-SD-Files on my SD card, but it tells me it's protected in writing, does that come from the fact that I formatted this card using the flipper zero, or is it something else? Thanks in advance
do i understand right that you install RM to show the easy Web install version and after that you download a tgz XFW to show another or support another CFW? or is it important to install first RM and then XFW
I have a question that I can't seem to find. I have a brand new SD card from a store that was 32 gb. I downloaded the files from the internet and could see them the first time but I was trying to do something and had to factory reset. (It was crashing so I tried to download a new firmware). But now I can't see the files downloaded from the repository. Tried reformatting the card, tried another card 64 gb and tried downloading your repository again. I can't see any Bluetooth files, and subg files, no gpio files and no nfc files etc. When I access the card on the computer I can see files that I cannot see on the flipper. Do you know why this is happening?
There's also lab.flipper.net for ofw apps from the computer
i had NO IDEA
😆
talkingsasquach - where i can order wifidevboard? please advice! thank you!
thats great thanks because flipc doesnt work in france i dont know why
@@myname-mz3lo france sucks
This is fantastic. I just bought a flipper zero and the wifi dev board and I have absolutely no idea what to do, lol. I just wanted one. Thank you for making these videos.
This is the very best Flipper Zero information source on the web, and it doesn't go unappreciated.
Thank you so much!!
I 2nd this. Sasquach has been invaulable to me, even though I cant afford a flipper zero i still utilize the web gui and thos channels information to educate myself.
Me as well, Im still saving up for one but when I get it it'll be so easy to use because of his videos
@@AnomalousURL
Thanks! Awesome setup guide!
Holy crap I can’t believe I’ve gone this many years not realizing that not all usb cables send data because they only send power. I have had so many unnecessary issues over the years using usb cables and not realizing such an obvious thing.
You’ve literally changed the rest of my life in a big way. Thank you
You have sucked me into this world! I love it! You are by far the best channel on the web! THANK YOU!!!!!!
Hey Sasquach, i rarely make comments on yt videos in general and I just wanted to say I appreciate all of your flipper videos as they are super helpful! I love the amount of work and effort you put into your videos and I love the enthusiasm you have while doing it!
i appreciate you!
Just received my flipper today. Not being tech savey this video really helped. Keep doing what your doing many thanks
I'm getting a flipper zero tomorrow this video is just in time. You are a very good source of information, and an easy and approachable channel. Keep up the good work.
Just in time! Also u can install apps for Official Firmware at lab.flipper.net/
I’m new to this. This was great, but I don’t know what went wrong. I keep getting an authentication error at the GitHub desktop part, however, all the files are on my desktop. What do?
Flipc is not working currently
Not working again.. 😅
I'm glad someone finally made a "SD Friendly" repo! Thank you. I'll get it linked from mine as it's a common question.
Is there any flipc alternative? It seems to be under maintenance for the last 2 days... thank you! :)
Still under maintenance 2 months later. It makes it hard to follow along with the video.
@keeline still down as of May 27th or at least it's down at the moment.
Hi Sasquach. Unable to flash ESPflasher to flipper. No download option. Currently says, "Build Timeout (maybe repository is too large) Any idea what is happening? Alternative flasher recommendations?
same here
same here
Same for me
Me, too! HELP
Thanks!
I’m TOTALLY a hacker but never learned how to properly insert a sd card. This video helped a lot! 👍🏽
Thats why we do what we do
Went to the SD Card link, downloaded the files. Problem is all of the submodules leave empty folders.
Same here
I went to fzeeflasher but keep getting the same error "object.debug.223 finished read loop. Error: couldn't connect to esp. Try resetting" help?
this is perfect timing. I just got my flipper this morning!
Thanks for the awesome videos!
Where'd you get yours? I'm tryna get one asap
@sidyfall5319 ordered from the official website. That's the only place I recommend ordering from to avoid scams, order usually take 2 to 3 weeks for delivery.
Right on time! Just received my Flipper Zero and I was looking for this kind of guide. Thanks m8!
I’m having issues flashing my WiFi board. When I got to the application I don’t see the quick flash option!!
same here
Hey great stuff, thank you! I got all the way to 13:41 but when trying to install the silicon labs universal drivers I get an error message "The third-party INF does not contain digital signature information". Plus, my extracted files don't show the suffix, i.e. .inf; so when I right click no option to install.
Is there anyone out there that is having the same problem I am having with going to the ESP flasher app and not seeing quick flash or the two different Firmware's
You just got yourself a new Subscriber, I love these flipper content
Keep up the good work man
Hey I am having this issue:
Connecting...
Connected successfully.
Try hard reset.
[Object.debug:374] Finished read loop
Error: Couldn't sync to ESP. Try resetting.
I tried holding boot > plug in end result is still the same
I also tried holding boot > plug in > press/release reset > release boot but I still get the same error. What do I need to do?
Trying to flash my wifi board through fzeeflasher and keep getting "Connecting...
Connected successfully.
Try hard reset.
[Object.debug:374] Finished read loop
Error: Couldn't sync to ESP. Try resetting." When I plug the board in (holding the boot button) there are 3 choices for the comport connection. Blackmagic ESP32 (Com 3), Blackmagic ESP32 (Com 6) and Communications port (Com 5)
Nevermind. Tried connecting without holding the boot button and that worked.
Hmmm. Now it won't connect again...
is the devboard plugged into the flipper? I had this issue and it was because I had it plugged into the flipper so I unplugged it and connected just the devboard to my pc and it worked
Love the info but question, you install esp flasher BEFORE you installed rogue master. Does that mean if I follow your video step by step and install esp flasher before rogue master, then do I need to go back to flipc and then reinstall esp flasher with the rogue master firmware chosen?
hello i have a question can you hack other bluethoot boxes with flipper zero e.g. wonderboom you see on the internet?
my intention behind it is that i want my peace at the lake and can listen to the birds and the water and not the music of the children is this possible ?
can you make wine instructions for it doesn't matter to me if i have to buy amplifiers ;) thanks in advance
I was singularly clueless about flashing the WiFi Devboard. Thank you so much for making it easy to understand!
I can't install ESP Flasher from the web
can you provide another web to install
I hope to George Clooney himself that my beard game is anywhere near as sleek as yours. Mad respect for the care you put into yourself as well as your subject matters, bud! If you're a sasquatch, we should all aspire to become the missing links!
Why installing Roguemaster before XFW if the latter is already based on the first one? Also, the reason you got the first esp32 installation wrong was the firmware version (you had a RC version of OFW but you selected unofficial.)
I followed everything and it worked perfectly (I flashed Xtreme) but then a day later I wanted to check RM so I flashed that but now when I reflashed Xtreme I no longer see the option the flash either Marauder or Evil Portal I only see one option which is Marauder (has Evil Portal).
So should I Replace or Merge the files that are named the same?
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
Perfect, this was the vid I was looking for to share with new flipper owners!
@TalkingSasquach When I try to quick flash both Marauder + Evil Portal, flipper says "cannot open file" with a picture of an SD card?
Same
There's something you didn't say... when I transfer the files to the mSD it asks me if I want to replace, merge or keep originals. What do I do?
I wish mine had asked me that. Plus, the firmware updates change so rapidly that these videos no longer work by the time they're uploaded and viewed. He goes into the weeds on the reg instead of first SSSSSSSSSSSLLLLLLLLLLLLLOOOOOOOOOOOOOWWWWWWWWWWWWWIIIIIIIIINNNNNNNNNNNNNNGGGGGGGGGGGGGG DDDDDDDDDDDOOOOOOOOOOOWWWWWWWWWWWWWWWNNNNNNNNNNNNNN and going step by step using ONE METHOD...and not well here's fifty other ways but anyway anyway anyway. Oh you got an error? Good luck noob.
@@thelockpickinglebowski633 Everything worked for me exactly as he showed it and I didn't find any problems following along. Since then I flashed several different FW just to see the difference but I suspect I'll settle for Xtreme in the end though at the moment I'm playing around with a Dev of RM that I downloaded straight from their Discord.
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
I have a problem using the esp flasher... It can not parse the file... I don't work at all so I have to flash my esp with a computer... Any Recomandations ?
What's the deal with subghz vs Sub-GHz?
Why doesn't the repo use the shorter name the Flipper defaults to?
When I try to quick flash both Marauder + Evil Portal, flipper says "cannot open file" with a picture of an SD card? Did I do something wrong? Update: I also tried different SD cards and installing both on the WiFi Dev board. Still same error.
Same problem
IDEM
I have to go into bootloader and the manual flash each on the WiFi Dev voard to get it to work.
i have the same issue
@TalkingSasquach same here. Can you advise please?
Anyone know why the ESP Flasher may not be working its just coming up as a question mark?
i get the same. I thought it may be the Flipper update is newer than the ESP Flasher... which may require an update to ESP Flasher. HOWEVER, this is simply a guess on my part.
Hi man, perfect guide 👍🏻 Thanks a lot. One question please - since I made your update I cannot find Flipper on iOS17 between BT devices .. no more connect with iPhone.
Hey I’m looking to buy one but I heard that the most recent update took away a lot of its capabilities. Is this true and is it even worth it anymore?
Hey Sasquach, I just got my flipper and I am following this guide after watching a ton of your videos. I just got the repository and now I am on the custom firmware part. I watched a lot of videos on unleashed and extreme (not sure if they are the same thing). At least from a video standpoint I'm not entirely sure what the advantages/ disadvantages are to switching to a custom firmware. I'm assuming the stock and custom still pull from that repository?
I know you just made this video but can u make an updated video plz some stuff isn’t working the the esp flasher and I have a WiFi board that saying I can’t use it unless I updated it. I skipped the esp flasher download at the start because it wouldn’t download with none of the links but I did ad the customer firmware
Do you need to format the sd before inserting?
When I go to rogue master I’m getting error: RPC error in command “propertyGet” and “StorageList”
Your a friggin absolute g and I love your vids and EVERYTHING about them. Your vids have made an idiot like myself into a learning machine ! This stuff was so native and different too me. Your vids really helped.
Just heard you on the HACK'D podcast, dude, your amazing! I had no idea how much fun my flipper could be! I know it's not a hard core hacking tool, but it's definitely me a lot about the hardware side of infosec. Your presentation is awesome as well, great channel, Thanks!!!
I just updated to the newest Momentum software do I also need to download the SD files for it?
I installed Xtreme and then added files to the SD card from GitHub. I was prompted if I wanted to merge files and selected yes, did I pick the right option or should I have overwritten?
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
Downloaded the folder, have the Xtreme firmware. Just select and copy all folders/files and paste on the sd folder? what's happen with the overwriting?
Question: What's the purpose of the music_player and wav_player folders full of songs?
This isnt working for me , any suggestions? I’m running macOS
hi
i downloaded the files and installed them but if i try to use any it just says empty but if i look it up with the file in qflipper i can see there is items in the files ? any help would be great thanks
Great walk through, I'm just having one issue I hope you can help me with. I was also following you through your marauder tutorial and my .pcap files are empty. Any idea what I can do to get them to actually contain the data. It shows on screen it is sniffing the packets. Thank you
hey i love your video but i have a problem wile doing everyting same as you . when i lunch like you the quick flaxh of marauder an evile portal its says ’’ cannot open file’’ do you know what did i do wrong? thank you in advence for your answer and sorry for my bad english :)
I tested and I can do evil portal but marauder I need to flash it manually idk what to do 😅
Running into issues flashing to marauder with ESP flasher. Gets all the way then says using version 4.4.5 SD card not supported?? Any help appreciated.
I just wanna know how to install your firmware that you created on my Flipper zero I’m having some trouble connecting it
Can you read toner chips 13.56mhz rfid with the flipper zero?
I have a question can you help me get my awok board working so I do it the same way or is it a different way ? Please help
Is the downloading files step from discord necessary for all this to work? I cant seem to access the channel the links are in.
Hello! Great video! I want a flipper zero, but I noticed that it has been in the market for some time. Do you know if a new version is coming up soon? Just to know if to buy it or wait.
Anyway you could point me in the direction of a link for the dev board for sale in the US? All the ones I keep seeing seem sketchy
Flipc site under maintenance, is there any alternative?
FINALLY!, I am able to take advantage of this video..and all the other "starter pack" videos for the flipper. Thanks Sasquach! Dont be a skid!! Flip the planet!!
hey i done that all but the esp flasher in flipper gives me an error code after i flashed the dev board on the flipper itself. The error code is "Failed to mount the SD Card. SD Card NOT Supported". What can i do. I also do on the marauder app saved to flipper sd card
WiFi Dev Board is out of stock on the main site.
Any alternates you would recommend?
Bonus would be if it has an Antenna port.
Thanks for the videos Sasquach!,
I just wanted do flash my Flipper Zero Dev Board but the fzeeflasher no longer shows evil portal for selection.
Any idea why?
Help! LI followed this video but ended up with unleashed firmware instead of RM custom build. And the flip c esp flasher isn't installing..
Sooo do i understand this correctly that with ESP flasher i am able to have the Rogue Firmware and the Xtreme firmare and can switch between them?
Hi there,
I followed your steps and some of the IR files like AC TV ect say failed to load? Any suggestions on how to fix this? New to flipper scene.
Thanks
The rogue master firmware had a cool passport when i pressed the right key on my flipper, i then installed the extreme firmware and now the rogue master passport or pokemon dont pop up anymore. how do i change that?
Flipc for the esp32 flasher is giving an error message, and not downloading to the flipper. Is there something I am missing?
Can you link to where you got that cool case for the wifi dev board?
Great, easy to follow tutorial. But missing some fundamental information - WHY do I want a new firmware? What does it do for me? WHY do I want to load all these git files on my device? What do they do? Or what do I do with them?
The air I'm getting when I try and run ESP flasher is says air preload failure update application to use with this firmware, API to old
Does the FZEE flasher and flasher on the Flipper Zero support only the wifi module sold by the flipper zero store or can you flash any ESP32? I have a Freenove Esp32-s3-wroom cam board and was going to try and use it with my Flipper. I tried to get it to work a few months ago but had to put it aside or chunk it due to irritation. Any advice and/or help would be greatly appreciated! Also, thanks for the videos.
It will flash almost all of the ESP-32 boards!
Hey after updating firmware you loose the ability to capture sub GHz frequencys and save them is there a way around this ?
Hi
Is it possible to copy a 25 kHz frequency with the flipper?
Quick question, I merged these files over replacing but I was thinking if these were meant to be replaced over merging this move could have been a bad idea.
Regards,
It seems that you might be using a MacOS and it is not case sensitive. Format the SD card in the flipper, update the firmware again using qflipper, then try to do the copy of the files in a windows system instead. remember to do antivirus exclusion or disable AV while you do the copy.
what did you end up doing?
@@No-Pro I did it on a windows computer
What do I do if for the ESP Flasher, it’s not asking to connect to a serial port, but instead asking me to download files
Do you need to format the SD card because when I take it out of the flipper and put it into the computer the computer can't read it
did everything but when i scan on marauder i get no results. Ive tried reflashing multiple times, even reset everything and started from scratch, same thing
Definitely sounds like the board does not have the firmware properly installed. Make if you're using FZeeFlasher, make sure u hold the boot button when you plug it in, otherwise try using the ESP Flasher app on the Flipper
i figured i t out, i had to run mauarder from the wifi folder not gpio. weird
@@sivanvasquez2264 oh yeah you're not the only person who's done that, no worries
i followed this guide and got my flipper all set up. but when i tried to download the android app for my phone, it doesnt detect a flipper. and i have been thru everything to try to find something that enables bluetooth or turns it on, and no luck. can you help me pls?
Hey man, I got a question. After cloning skizzophrenic/ubers-sd-files, I'll copy the files over to sd, but it only shows copying 23,806 items instead of45,555 items it shows on your video. What gives?? How can I get the rest of the files?
I was wondering the same thing I just extracted it and it shows 11,658 files and 818 folders. I think the repo got neutered.
Did you do it by copying the URL? I just did it and it's at 51139 now.
Great content as usual, mate! Keep up the great work for the community. Thank you
So I followed this guide and after installing rouge master a lot of the files I got from the uber drop are empty would love some info.
Hey, i dont have any option to put my sd card in at my pc, how can i transfer it direktly to my flipper?
Whenever I clone the repo to my SD I end up with like 8.4gb used. Has something gone wrong? Seems the actual repo is only 3.45gb
Great video but did run into a problem. After installing everything on the video and plugged back in the flipper said to update. I updated and now everything seems to be missing. Do I need to re format and do it again without updating the flipper?
Clicking update in QFlipper will load the latest official firmware, overwriting custom firmware in the process. Just reflash your CFW and you'll be good
@@TalkingSasquach thank you very much!! Keep up the awesome work.
I have a question, after installing the rogue master firm, you installing the xtreme firmware, why did you do that?
I just did that to show different ways to install firmware
Hey talking sas', I'm trying to paste Ubers-SD-Files on my SD card, but it tells me it's protected in writing, does that come from the fact that I formatted this card using the flipper zero, or is it something else? Thanks in advance
@TALKINGSASQUACH WHERE YOU BUYING THE FLIPPER AT?
When I try and run the latest developer firmware ESP flasher fails when I go back to the standard release it works
which wifi dev board do you have? is it WiFi Devboard for Flipper Zero ESP32-S2 V1?
I love your channel but I have one question. What version of flipper zero should I have installed to download the set of files? (Dev, official, etc)
do i understand right that you install RM to show the easy Web install version and after that you download a tgz XFW to show another or support another CFW? or is it important to install first RM and then XFW
I install one then the other, which you use is a matter of personal preference
But there’s no reason to install RM before XFW
@@juliobrs nope
Awesome sauce
I have a question that I can't seem to find. I have a brand new SD card from a store that was 32 gb. I downloaded the files from the internet and could see them the first time but I was trying to do something and had to factory reset. (It was crashing so I tried to download a new firmware). But now I can't see the files downloaded from the repository. Tried reformatting the card, tried another card 64 gb and tried downloading your repository again. I can't see any Bluetooth files, and subg files, no gpio files and no nfc files etc. When I access the card on the computer I can see files that I cannot see on the flipper. Do you know why this is happening?
The flipper also recognizes I have a SD card in there and it is a sandisk
Same. I can only see the files when running xtreme.
@1:48 My FZ contain 11.9GB on the SD Card.
Im trying to install the ESP Flasher to my flipper and it just keeps tryin to save to my comp, any ideas? P.S. Qflipper is closed