ฝัง
- เผยแพร่เมื่อ 14 ส.ค. 2018
- Type A Oil (Mobil No.10) 1 GALLON: amzn.to/2KUV5vF
Type B Oil (Mobil DTE 24) 1 GALLON: amzn.to/2vJ9RkB
Type C Oil (Mobil DTE ISO 68) 1 GALLON: amzn.to/2OxwAqL
Way Oil (Mobil Vactra Oil No.2) 1 GALLON: amzn.to/2OBp2Dd
I wanted to make a short video of how I oil my Lathe. Check out the 1 gallon containers!
Trombone Cleaning Rod: amzn.to/2BbhUeX
South Bend Lathe Rebuild Kit 13": amzn.to/2Ba3g7L
South Bend Lathe Rebuild Kit 10L or 10R (Heavy 10): amzn.to/2BixpSi
South Bend Lathe Rebuild Kit 9": amzn.to/2BcgpNz
South Bend Lathe Rebuild Kit 10K (10 Light): amzn.to/2OCoQnh
South Bend Lathe Rebuild Kit 16": amzn.to/2KVk8Pv
Performance Tool Hand Held Oiler: amzn.to/2KSrV0o
Open Gear and Wire Rope Oil: amzn.to/2MomB9L
Cleaning Rags: amzn.to/2MqfIod
2 Axis DRO: amzn.to/2BiArWG
Noga Dial Indicator Stand: amzn.to/2KTJ1em
I could not find the 16oz versions of the oil in Amazon but did find them on eBay. Here are a link you can try:
Sellers Id: bluechipmachineshop
Link: www.ebay.com/itm/SOUTH-BEND-L...
I wanted to make a short video of how I oil my Lathe. Check out the 1 gallon containers! - แนวปฏิบัติและการใช้ชีวิต
Very helpful. Thanks for posting this video. That's a beautiful lathe.
Nice Job on the Video. I'm getting a South Bend 16 soon so this will be useful.
Awesome video explaining what the oils are, love how clean your lathe is & shop
Just found your channel and subscribed. Very nice work
Thanks! Just sub’ed to your as well.
Let me know what you think of the video "How to Oil and Clean a South Bend Lathe".
Very helpful! Do you have, or do you know of a video that details how to tension the two motor to pulley belts and the big flat belt?
Great video can you start making more videos very informative 👍
Good work Adan, thanks
Paul Greenlee thanks Paul. I’m glad you enjoyed the video and was able to give you some useful info. -Adán
Great video thanks 👍
I came back to this video to recheck the oils and where they are used. The illness I deal with affects my memory big time. You and the basement guy explain things with clarity and I for one appreciate your videos. I was working on my first project, an aluminum protective cover for a GPS device on a single seat Helicopter. I was in the finishing stages when the rear Headstock bearing locked up at higher speeds. I can run it slower and longer but I need the higher RPMs to finish shaping the cone. I put some Motorkote in the rear Oil Git and it helped it stay running a little longer but there is no doubt I will have to replace it. I was going to suggest something to you and I don't know if it will work or not because I haven't installed a set of New Era Dials. I bought a set for my SB 13 but these are made for another brand, maybe a Logan, not sure. I know from watching Brad's install and modifications of the New Era Dials he had on a lathe that there was some binding because of the 2 lock screws. Could you make a new compound and cross feed screw and thread the crank handle ends to mate to the New Era Dial sleeve that the screws lock in. Thread it to match a the new threaded additions on the new parts. Then there should be no side to side movement and use the locking screws to lock it in place or even better a pin of some sort. I was going to put this set on mine but my lathe would need to look like yours so I'm going to sell my pair in the next few weeks after I complete the work needed on the spindle. Consider making a video on your shop and the tools and machinery you have, I might have asked you before but then I went back and deleted what I wrote because it sounded like I was a broken record. Thank you again for the great information on the lathe oils and how to use them.
Thank you
Excellent oiling tutorial on the south bend lathe. Thumbs way up!!
i know I am kinda off topic but do anyone know a good place to stream new movies online?
@Elon Kamden ehh I use flixportal. Just search on google after it :P -santiago
@Santiago Ezekiel Thanks, signed up and it seems like a nice service :) I really appreciate it !
I just use 10W30 full synthetic engine oil in my 1934 South bend model C lathe
New Subscriber here, this is a wonderful video, very thorough......and your lathe looks like it just came off the showroom floor. BRAVO...Cheers from Florida, Paul
Thanks for the kind words Paul. Glad you enjoyed it and will come of some use. Check out the restore video if you haven’t already. She is a beast! Cheers!
@ just started watching the restore.......I also own a 13" x6' SB from 1942.....has some wear on ways., but for what I do, it will not be an issue....but not bad....wish I had a D-4 but I am stuck with a 1
Great video!!! Your lathe looks like factory new. I would like to see more info how you attached the read outs to the cross slide. Thank you.
Michael Renner Thanks Michael! I have a few videos on the Restoration I did on this lathe as well as one for the DRO install. Check them out th-cam.com/video/R8Qki8Tr_xg/w-d-xo.html (restoration) th-cam.com/video/p15xjghD2KM/w-d-xo.html (DRO install). Thanks for the Sub! -Adán
I really need to just get it together and order the gallons. I'd also like to try the open gear spray lube on my 13" Good video. Thanks.
John, especially if your planning on having the lathe for awhile. You really do go through a lot of C type and Way oil. Thanks for watching! -Adán
Yeah, the C oil is definitely what I'm flying through. I made a little tray that catches the oil under the gears and runs it down into a bottle for reuse as just general purpose shop oil. Someone with real fabrication abilities could do it with nice materials, and improve upon it's shape to make it run under the gear box as well. It could be a little money maker really.
Good video. I have a 10 L.
What year is your lathe mine is identical and I’m trying to figure out what year I have I’m guessing between 1947 to 1955 but I don’t know
Where did you manage to get the instructions manual.
Beautiful machine. Where did you get the hand dials?
Went to the South Bend Facebook page and announced I was looking for them and the person who sold them responded. Good luck! -Adán
Went to the South Bend Facebook page and announced I was looking for them and the person who sold them responded. Good luck! -Adán
Hi Adan, did you end up selling your 13" lathe? I thought you'd said on the Facebook group that you were selling--if so, how long did it take?
If I recall correctly it was about 30min. 😂 I ended up buying a 9A and restored exactly like the 13”.
Do you know of any place to get new oil reservoirs or reservoir covers?
I usually hunt them down on eBay. Also, you can try McMaster Carr. -Adán
Where did you get the hand dials from
The dials are made by New Era and I found them on the south bend fscebook page awhile back. Thanks for watching!
Nice hand dials. Do you have the makers contact info?
Thanks for watching. The brand is New Era. Your going to have to do some digging as far as where to get them. They are no longer made. 🤔I want to say I got them from a guy on the South Bend Facebook page. Good luck! -Adán
Is the link still available. Jeff
All the links work except for the type C oil. Just search on ebay or Amazon the discription for that link and it will pop up. -Adan
Thanks, I have that 13 as well as a 10K. Very well done video, thanks for the links.
Thanks Lee Roy! I'm glad you liked it. I think if I get a chance to buy another South Bend it will definitely be a 10K. -Adan