Anybody can boost voltage to 5V but if you have no current nothing is going to charge anytime soon. It takes at least 250ma and .5amps for a healthy charge. at the rate he's charging in the video you would need 50 candles and a 2 week vacation to charge a phone.
No! That's where the boost converter comes in hand. Tho you need to clock it to 5 volts exact so that it can charge the device. Idk about the ampheres, yes it is able to charge so that concludes that the ampheres might be converted. But this concept is effective for survival or a sudden blackout and if you only have a candle it would be great
@@Kristoff2005don rely on the voltage. You should know what is the peak power that module can produce. Assume that, the power produced only 1W, so it will always 1W even though you boost or buck the voltage, the power will stay the same, moreover because of the module efficiency, the power output will be less than 1W also..
@@bro_leo dang, 5 years ago I was all about the voltage lmao I haven't studied electronics in-depth but yeah, 5 volts with 1 watt is a far cry from a cheap wall plug. Didn't know what I was talking about, whoops
hey man thanks for the video, extremely helpful, just,wanted to know if its ok if the peliter is burned on can be lit with fire on one side?Or did u put like metal or something so the peliter wouldn't be damaged?
Could have flexible peltier effect heat pump be put inside of a shirt capable of charging your phone, like the entire shirt would be made out of this flexible material, because your shirt probably isn't the best place for it but your body is probably colder than the air.
It doesn't sacrifice anything you dumbass. Voltage and current are connected through the power equation. If the voltage is boosted the current must decrease so that power remains constant, since you can't make something out of nothing
Bro, LM2596 module are more efficient than LM7805 linear regulator. LM2596 is a switching buck converter module that will chop the voltage and convert the excess input voltage to current on the output. Therefore, the output current will be higher than the input. While linear regulator such LM7805 cannot do the same thing. They only cut the voltage to 5V but can't increase output current but the current from the input will be the same as output. So it will waste energy to heat.
Depends on the battery capacity of your phone and how much ampheres and voltage your boost converter gives. I'd recommend 5 volts tho the ampheres is not changable it will still power a phone in an emergency Note: this is not for normal use it is for emergencies only like for survival or blackout
Actually yes! It is necessary for the other side of the peltier to cool down and the other to heat up. If you don't use a heatsink you'll need to clock the boost converter to 5 volts. To make it simpler the other side cools the other heats, without a heatsink the voltage is low so you need to convert it a little higher
This will never work without voltage booster,single peltier without voltage booster will do nothing,if anybody want to make peltier generator first get a voltage booster and than you can start making your generator
No try it for yourself the peltier does exist if you research! And some are like "Oh, no! It can't give the power to charge a phone!!" that's why a boost coverter is given for, do a research and you'll find that it converts a voltage higher or lower and he already clocked it to 5 volts. Honey if you try to misbelieve do a RESEARCH FIRST cause it might help you on how to react if the video is real or fake
![Which is the best Peltier module for your project? [test 1]](http://i.ytimg.com/vi/ACadXn5lwV0/mqdefault.jpg)
![Which is the best Peltier module for your project? [test 1]](/img/tr.png)
I like these tools and the small bolts nuts, metalwork, handling techniques.. I would love to experiment and live there. Good energy!
Anybody can boost voltage to 5V but if you have no current nothing is going to charge anytime soon. It takes at least 250ma and .5amps for a healthy charge. at the rate he's charging in the video you would need 50 candles and a 2 week vacation to charge a phone.
250ma and .5 amps? So what .75a? You mean .5amp and 5v. If you have no voltage you have no current.
It will trigger the 'charging' alert of your phone but it's pushing in like 0.05W. Your average wall charger will push in 5W.
Gadget Addict yeah mine only push 0.04 Amp. how do i boost the amp so that i can charge my phone?
No! That's where the boost converter comes in hand. Tho you need to clock it to 5 volts exact so that it can charge the device. Idk about the ampheres, yes it is able to charge so that concludes that the ampheres might be converted. But this concept is effective for survival or a sudden blackout and if you only have a candle it would be great
@@Kristoff2005 um the voltage is being stepped up so your available current is going to be lower
@@Kristoff2005don rely on the voltage. You should know what is the peak power that module can produce. Assume that, the power produced only 1W, so it will always 1W even though you boost or buck the voltage, the power will stay the same, moreover because of the module efficiency, the power output will be less than 1W also..
@@bro_leo dang, 5 years ago I was all about the voltage lmao
I haven't studied electronics in-depth but yeah, 5 volts with 1 watt is a far cry from a cheap wall plug. Didn't know what I was talking about, whoops
hey man thanks for the video, extremely helpful, just,wanted to know if its ok if the peliter is burned on can be lit with fire on one side?Or did u put like metal or something so the peliter wouldn't be damaged?
Could have flexible peltier effect heat pump be put inside of a shirt capable of charging your phone, like the entire shirt would be made out of this flexible material, because your shirt probably isn't the best place for it but your body is probably colder than the air.
Fixing hot plate and the heat sink, which of the following thermoelectric module can produce more power? TEC1-12702, TEC1-12706, or TEC1-12710.
Use generator module instead of cooler module
it depends tge qyality of theice but average iT wil take 2days or two years to fully charge your phobe
Does that crushed ice melt faster next to the cell? or outside it?
I like your video
body heat powered online enabled smartclothes if the powerdraw is in pico units are scalable
At 100˚C heat _ 0˚C cold = 100˚C generat voltage is about 4.5V ..current is 0.66A ... power about 3W ..
Apparently these peltier devices have an efficiency of only 5%
Did you take this in consideration in your calculation?
Could a larger model power to USB one with a USB fan and another with a normal USB, I'm sure you can guess what I'm thinking.
you use a tec for your project ,isnt it better to have teg peltier ?
teg only has 5v right? would that be enough? currently doing research for an experiment
congratulations
Was machst du im Sommer?
does the voltage booster sacrifice amps or just create an unsteady flow?
It doesn't sacrifice anything you dumbass. Voltage and current are connected through the power equation. If the voltage is boosted the current must decrease so that power remains constant, since you can't make something out of nothing
..."i don't know Rick...it looks fake"...
Peltier will not spoil if we heat it
why dont use a l7805 instead the lm2596 and car circuit ?
Bro, LM2596 module are more efficient than LM7805 linear regulator. LM2596 is a switching buck converter module that will chop the voltage and convert the excess input voltage to current on the output. Therefore, the output current will be higher than the input. While linear regulator such LM7805 cannot do the same thing. They only cut the voltage to 5V but can't increase output current but the current from the input will be the same as output. So it will waste energy to heat.
how much time to fully charge the phone from 0 to 100
or how much snow/candles?
101
It will actually drop the battery percentage from the cellphone.
Bruh its 2 weeks
Depends on the battery capacity of your phone and how much ampheres and voltage your boost converter gives. I'd recommend 5 volts tho the ampheres is not changable it will still power a phone in an emergency
Note: this is not for normal use it is for emergencies only like for survival or blackout
Sir this video can cloud volt ?
What circuit did you use to connect the peltier cell? Help
Link is in the description brother.
@@none.892 where is the description
Will you have higher output if you use more peltier plates?
Connect in parallel increase amps. Connect in series to increase voltage.
It will double the power output but should also melt your ice 2x faster. (The efficiency will vary depending on your setup.)
Did u adjust the voltage output before this?
the car charger thingy already does that for him.
@@kiyoponnn lol
is it necessary to use heatsink??
pls answer me
Actually yes! It is necessary for the other side of the peltier to cool down and the other to heat up.
If you don't use a heatsink you'll need to clock the boost converter to 5 volts.
To make it simpler the other side cools the other heats, without a heatsink the voltage is low so you need to convert it a little higher
Your nose loves to whistle
This will never work without voltage booster,single peltier without voltage booster will do nothing,if anybody want to make peltier generator first get a voltage booster and than you can start making your generator
Why do you need voltage booster?
Without the voltage booster the TEG Is probably producing MAYBE 200 millivolts and 200 milliamps.
Cameron Moisan thank you very much :)
Chyle Andrei Lee No problem at all!
@@none.892 This is a TEC module you fucking moron
@@kiyoponnn lol
Based on what i see it would take 6 days to charge a phone. 5V at 80ma maybe 100ma. Good luck doesn't work!
its not even close to getting 80 mA this is getting 5 mA more likely. this will drain your phones battery.
how many amps?
pililaman97 not a lot if he's using a booster circuit would take very long to charge 😒
55
The peltier he use i think its 60A
Estragou o módulo, não pode super aquecer! 😂😂😂
This does not work. Do you want a lesson on ohms law? Fact, there's not enough power to do what you claim. 5 volts alone is not the whole story.
OK but where can I get those amps?
I looked at Walmart but they don't seems to have any...
:(
Michael Laffin hello there , are you on skype / face book/? i like to ask you questions its ok? if only in russian let me know thanks
Post your comment on his newest video
The day that you to need to use it, your cell phone will be useless. Will be the world's end. Metro last night.
Nice trolling.
No try it for yourself the peltier does exist if you research! And some are like "Oh, no! It can't give the power to charge a phone!!" that's why a boost coverter is given for, do a research and you'll find that it converts a voltage higher or lower and he already clocked it to 5 volts.
Honey if you try to misbelieve do a RESEARCH FIRST cause it might help you on how to react if the video is real or fake
Omg why this comment is so dumb bruh
cheat!!! under power load this peltier give less than 1Volt ,step up can not work.liar...
step up can work from 0,9V. So it's possible.
yes.. but this step up 1volt gives only 0.01A 4.7v 0.047w so it is not possible
it is not possible to charge iphone like the video. 0.047w they are not enough to charge the iphone.
Xenos Anomos while your correct (it would take about 8 TEC plates (and why not use the correct TEG plates?), but damn, coulda ya be ruder about it?