G'day Martin Australia here, top video, and has taught me a few things I've been missing thanks for that, have been learning PDR for my own use off TH-cam, being an old Pom it's good to hear a Pommy accent instead of a Yanky one for a change. Keep up the good work - DaveO
Hi Danger Close thank you for your kind words and apologies for not replying sooner. I hope you enjoy our latest video and all the best for Christmas Martin
Hola qué tal mi nombre es Diego soy de Uruguay 🇺🇾. Este es un oficio que hace poco tiempo descubrí y estoy por empezar a practicar . Felicitarte por cómo trabajas y transmites tus conocimientos, saludos
Hi Diego thank you for your message. Congratulations on starting pdr I wish you success, it’s not easy to learn but with practice you will get there soon. Have a great Christmas and all the best for 2022 🙌🏼 Martin
Hey Martin! I wish you could look at a dent on my Mazda Driver's fender sometime. It's all I ever notice every time I walk to my car. Just outside Halifax is where I'm located. Halifax, Nova Scotia that is! 😜 Damn good videos by the way!
Thanks for great videos. Am I right, the body panels in my 1992 Saab convertible is ticker then in the cars of today? To me it feals stiffer and ticker. If that is a fact, will this hot glue pulling work on the old stiffer body panels? I have several small dents lik this around the car. Thanks in advance.
Please, I have a dent in the door housing profile,just near the curvature of the metal,in correspondence of the fill cap,caused by the key of the camper,a Citroen jumper.I pulled it many times but it didn't come out completely.Could you give me a tip? Should I insist by pulling or I have to push it from back? And in this case,from where could I have access?by removing the fuel small door? Could I avoid this and only pull? Thank you very much!!
Hi Ciro thanks for your comment. It’s really hard to give good instructions as I’ve not seen the damage. I would always recommend you speak to a PSR technician as they will sort it for you and you won’t run the risk of damaging it yourself if you don’t fully u deter and how to do this skillset. This may save you a lot of money and headache in the future Thanks for watching Martin
literally trying to repair the ripples that are there from the brace being bonded by glue to the panel hence why your "dents are all in a line across th vehicle. what kind of dent happens that way on both sides.
Hey Martin looked like a nice day at the office mate, your channel is all quality maybe you could organise a cameo appearance for Ben I think it would be interesting seeing you both working together on the tools. 🦘🇬🇧
G'day Martin Australia here, top video, and has taught me a few things I've been missing thanks for that, have been learning PDR for my own use off TH-cam, being an old Pom it's good to hear a Pommy accent instead of a Yanky one for a change. Keep up the good work - DaveO
Thank you for checking out my latest video! its been over 100 days since i uploaded i apologise, just been sooo busy
all the best, Martin
Quality matters, not quantity!👍👍👍
Great video Martin, good to see you back!
Thanks Graham!! 🙏
Top work from a top tech! 👌
Thanks Jake and il be the first to congratulate you on your 100k subscribers well done !!
@@dentremover01 👍👍👍
It's a master class on every video. What fantastic level of skill you posses, and such a pleasant human being. Great job good sir!
Hi Danger Close thank you for your kind words and apologies for not replying sooner. I hope you enjoy our latest video and all the best for Christmas
Martin
Great work combined with great experience equals customer satisfaction 👍👍👍
Thank you Piotr 🙌🏼
just brilliant martin is a perfectionist
Thanks Dav Mac41 really appreciate your kind words
Great stuff Martin, nice to see you back on the big screen :)
Hola qué tal mi nombre es Diego soy de Uruguay 🇺🇾. Este es un oficio que hace poco tiempo descubrí y estoy por empezar a practicar . Felicitarte por cómo trabajas y transmites tus conocimientos, saludos
Hi Diego thank you for your message. Congratulations on starting pdr I wish you success, it’s not easy to learn but with practice you will get there soon. Have a great Christmas and all the best for 2022 🙌🏼 Martin
Watching from France !!!! I love you🤪🤪🤪thanks very much Martin 😉😉
Thanks Ronus 🙏
Top repair & video Martin! 👍
Thanks Martin merry Christmas
@@dentremover01 Merry Xmas Too!!!
It's good to see you back, Martin. Superb video as always. Another Big Thumb up for you👍 Cheers!
love watching your vids Martin keep them comming
Thank you Paul merry Christmas
Sei un grande da Simone Italia mantova.
Thank you Simone merry Christmas 🎅
Well done Mate 👍👌💯I like it 👍cheers
Best Martin. Thank you your video!
Thank you 🙏
Great repair one again 👏 👍
👍well done
Hey Martin! I wish you could look at a dent on my Mazda Driver's fender sometime. It's all I ever notice every time I walk to my car. Just outside Halifax is where I'm located. Halifax, Nova Scotia that is! 😜 Damn good videos by the way!
Very nice mate 👍
Thanks for great videos.
Am I right, the body panels in my 1992 Saab convertible is ticker then in the cars of today?
To me it feals stiffer and ticker. If that is a fact, will this hot glue pulling work on the old stiffer body panels?
I have several small dents lik this around the car.
Thanks in advance.
Your a clever bugger… just you were nearer 👍
Thanks Martin, keep it up!!
Please, I have a dent in the door housing profile,just near the curvature of the metal,in correspondence of the fill cap,caused by the key of the camper,a Citroen jumper.I pulled it many times but it didn't come out completely.Could you give me a tip? Should I insist by pulling or I have to push it from back? And in this case,from where could I have access?by removing the fuel small door? Could I avoid this and only pull? Thank you very much!!
Hi Ciro thanks for your comment. It’s really hard to give good instructions as I’ve not seen the damage. I would always recommend you speak to a PSR technician as they will sort it for you and you won’t run the risk of damaging it yourself if you don’t fully u deter and how to do this skillset. This may save you a lot of money and headache in the future
Thanks for watching
Martin
Great work. Interesting to know how long it took to do the BMW in this video.
Outstanding my friend... I love your Car lift where can I get one lol
Nice work
Thanks Don!
You are definitely a top tier tech for sure!!! What type of line board light are you using?
Thank you for your kind words, the light board is an Elim a dent 20” board
can I use the glue sticks in lidl to do this?
Hi, I really like your videos, show me more how you repair .shoot the video in detail, thank you!
Nice work, I was just wondering is it a special glue you use or will any glue gun glue do thanks
Really enjoy your content,could you recommend any courses in PDR,thank you.
Hi thanks for your comment. Where are you based?
Thanks Martin
I am in Bristol, thank you for replying.
Hi mate, can you please pass on the information regarding the paint depth gauge?
What spray do you use to remove the glue?
Just put the slide hammer on the top on de tab, it will not fall down 😜
What is the brand of the light please
Hi Michael
My light (reflection board)
Is an Elim A Dent Version 3, 20” light with 6 LED strips
You can buy these from Anson Tools in 🇺🇸
Da quanti anni fai questo lavoro?
Hi Simone thank you, I’ve been repairing cars with pdr since 2006 and started my business in 2011 😊🙌🏼
@@dentremover01 sei veramente un grande spero un giorno di incontrarti e vedere di persona un tuo lavoro.
i am curious how much all that work costed the customer ?
👍👍👍
Thank you. Happy new year
literally trying to repair the ripples that are there from the brace being bonded by glue to the panel hence why your "dents are all in a line across th vehicle. what kind of dent happens that way on both sides.
I’d have to re watch the video to let you know but I know the difference between brace bonding and dents
Thanks for your comment
It’s had more hits than Elvis
Hahahaha
🙌🙌🙌🙌
Hey hey bro
Martin ok 👍🇺🇿
Thank you 🙏
👍✨
Hope everyone is doing well during this pandemic. What happened to you? I hope everything is fine.
👏👏👏👏👏👍👌😉
👍класно
Hey Martin looked like a nice day at the office mate, your channel is all quality maybe you could organise a cameo appearance for Ben I think it would be interesting seeing you both working together on the tools. 🦘🇬🇧
I’ve asked him Bill, but he won’t pay my appearance fee…. Maybe we’ll do a go fund me 😂
Hahaha I’m sure I replied to this one! Il have a word with the Bossman and see what we can do! Lol