Have a 1991 Jeep Cherokee Laredo with a factory Jeep 56002467(1991) AM/FM Cassette Player and swapped out the tape modules in two 2467 cases. Now I have me some rocking tunes. Now what I need to know is what is the cause of either the left or right channel going out on a 2467 and on a 56009004(1992) the volume knob is maxed out but still need just a little bit more volume.
You’re very welcome! I’m glad this still helps people out after all these years. I also have a video on how to add factory cruise control to these Jeeps, too.
actually trying to do the opposite and installing the factory radio, getting rid of the aftermarket one. Does that ground on the factory radio simply need to be tied into the chassis?
The ground lead came from the factory wiring bundle. Should be there still… even with an aftermarket radio install. But yes, that is simply a chassis DC ground connection.
I have a 2000 Jeep Cherokee Sport , will mine have the female ground wire aswell ? And I ordered a wiring harness off amazon , will that harness come with a ground wire , and also will I have to go buy a male groundwire connector and put it on the ground wire?
Nate Dogg The harness will not have a ground wire on it. You have to wire the black ground wire from the aftermarket stereo harness directly to the female plug I disconnected from the back of the factory stereo. It does ease installation if you put a male connector on the black ground wire coming from the aftermarket stereo harness... you don’t have to, though. You can cut the ground female plug off and attach those two wires together for your ground.
Thank you So much, You are the best video I have seen yet that explained the process. God bless.
Faith You’re very welcome!
Have a 1991 Jeep Cherokee Laredo with a factory Jeep 56002467(1991) AM/FM Cassette Player and swapped out the tape modules in two 2467 cases. Now I have me some rocking tunes. Now what I need to know is what is the cause of either the left or right channel going out on a 2467 and on a 56009004(1992) the volume knob is maxed out but still need just a little bit more volume.
Super Duper Paratrooper! Exactly what I needed, Thank U
You’re very welcome! I’m glad this still helps people out after all these years. I also have a video on how to add factory cruise control to these Jeeps, too.
actually trying to do the opposite and installing the factory radio, getting rid of the aftermarket one. Does that ground on the factory radio simply need to be tied into the chassis?
The ground lead came from the factory wiring bundle. Should be there still… even with an aftermarket radio install. But yes, that is simply a chassis DC ground connection.
Thank you very good installation
I have a 2000 Jeep Cherokee Sport , will mine have the female ground wire aswell ? And I ordered a wiring harness off amazon , will that harness come with a ground wire , and also will I have to go buy a male groundwire connector and put it on the ground wire?
Nate Dogg The harness will not have a ground wire on it. You have to wire the black ground wire from the aftermarket stereo harness directly to the female plug I disconnected from the back of the factory stereo. It does ease installation if you put a male connector on the black ground wire coming from the aftermarket stereo harness... you don’t have to, though. You can cut the ground female plug off and attach those two wires together for your ground.
@@thomasjtsi alright thank you so much , I'll keep you updated
Nate Dogg Sounds good. Any other questions just post and I’ll reply as soon as I can.
Great video. Easy and to the point. Were you required to do any soldering? Also, what mounting system did you use? Thanks!
M C Didn’t require any soldering. It was a setup from eBay that included the dash kit & wiring harness.
@@thomasjtsi appreciate the feedback
@@thomasjtsi Do you need the wire harness or just the mount? And use the existing wires in car?
M C The dash kit is what mounts the new stereo into the dash. The wiring harness wires to the new stereo wiring and plugs into the factory harness.
Where you get the wiring harness with that ground
@@gtaonlinestoryvideos7397 It was a basic install kit I ordered from ebay
What’s the exact name of the stereo replacement in the video trying to find out so I don’t order the wrong one
@@h.dagger5300 I’m not sure what you’re asking
@@thomasjtsi what was the model of the new stereo (pioneer) you replaced your old one with
@ Honestly I don’t recall. It was a very basic, aged at the time, stereo. It has since been upgraded to a better unit.
@@thomasjtsi got it thanks for the help
Awesome
Great video...
Thank you!
10mm
MARZ1911 I’m sorry??