Cisco Access Point to Controller | AP Joining With vWLC | Step By Step Configuration | CCNA | ENCOR

แชร์
ฝัง
  • เผยแพร่เมื่อ 21 ก.ค. 2024
  • In this video, we're going to show you how to connect a Cisco Access Point (AP) with a virtual Wireless Controller. We'll walk you through the simple steps of connecting the Access Point to the controller, no matter if you're a begginer, a network engineer, or just curious about how things work.
  • วิทยาศาสตร์และเทคโนโลยี

ความคิดเห็น • 17

  • @catarinatunguno5023
    @catarinatunguno5023 4 หลายเดือนก่อน +1

    J'aime beaucoup ton travail.❤

  • @MohanRaj-dx6ne
    @MohanRaj-dx6ne 4 หลายเดือนก่อน +2

    Such a clear video to join an AP to WLC.....keep uploading these kinds of WLAN videos

  • @Cisco-Instructor
    @Cisco-Instructor 22 วันที่ผ่านมา

    AP in Flexmode was my problem. Thanks

    • @silesiocarvalho
      @silesiocarvalho  21 วันที่ผ่านมา

      That's awesome. Glad it helped.

  • @linioalan
    @linioalan 4 หลายเดือนก่อน +1

    Excellent explanations, lots of usefull insights to take note that can be handy even in the case a troubleshooting is needed, thanks a lot for sharing!

  • @glenntembo2693
    @glenntembo2693 4 หลายเดือนก่อน +1

    Thanks Silesio Carvalho- nice delivery

  • @Leokev123
    @Leokev123 4 หลายเดือนก่อน

    Hi Great video! But Will you also be showing us a video of multiple SSID/VLAN in a controller as well?

    • @silesiocarvalho
      @silesiocarvalho  4 หลายเดือนก่อน

      Probably only using packet tracer. My physical switch doesn't support trunking.
      Tks

  • @sunableflames9365
    @sunableflames9365 4 หลายเดือนก่อน

    Thanks for the video.Which model of the Cisco AP did you use in the video?Thanks.

    • @silesiocarvalho
      @silesiocarvalho  3 หลายเดือนก่อน +1

      It is Cisco AP 2702.
      Thanks

  • @scottp8329
    @scottp8329 4 หลายเดือนก่อน

    Brilliant video but I’m a little stumped on how your connecting the the ap I assume your connection is to your computer but I’m confused to how the controller and the your pc know how to decide to say oh this is for the vwlc does your pc just know to pass it to the vwlc or is they some separate config to do 🤷🏻 thank you.

    • @silesiocarvalho
      @silesiocarvalho  4 หลายเดือนก่อน +1

      Thanks for that.
      Just bridge the vwlc interface with the physical interface of pc. They'll be on the same lan. It's like having two interfaces on your physical lan. Physically pc and ap are connected on thebsame switch. Broadcast from ap will also be sent to vwlc by pc.
      The next video might be more challenging/crazier 😉

    • @scottp8329
      @scottp8329 4 หลายเดือนก่อน

      Ahhh ok I understand now thank you buddy 🤙🏼