🎦 V#37 Wltoys 144001- 🚀 SUPER FAST Wltoys 144001 !!! 158 km/h Speed Run with 3S Lipo
ฝัง
- เผยแพร่เมื่อ 29 ก.ย. 2024
- Please click SUBSCRIBE : bit.ly/2VM8DFi and help this channel grow _ Thanks ! 👍
This video is an update of my rc car "144001 GREEN" which crashed earlier when running with the stock tires.
Now it´s finally rebuilt and back on the road again hitting top speed so close now to 100 mph (160 km/h) using 3 cells lipo.
The change from previous setup are the foam tires, metal spur gear and new new motor location.
UPDATE: Fastest Speed Record of this rc car : 176 km/h
• 🎦 V#73 New PB : 176 km...
Hope you enjoyed this video!
Thanks for watching and your support to this channel 👍
Please SUBSCRIBE & hit the Notification bell icon "🔔"
****************************************************************************************************
You can get this rc car and UPGRADES from these links:
1) WLTOYS 144001 (1/14 Scale Buggy) from this link:
--👉www.banggood.c...
*** Use this DISCOUNT Code (34% OFF) : BG4ac734
Valid until 31-Dec-2021
New 1/12 version 124019 ( 46 mm longer):
www.banggood.c...
2) ESC (Electronic Speed Controller) 120 Amp :
www.banggood.c...
3) Brushless Motor : (will be revealed after hitting +100 mph) ... please check the newer videos of this rc car
4) Servo:
www.banggood.c...
5) SkyRC GPS Speedometer:
www.banggood.c...
6) Recommended Transmitters :
a) Flysky FS-GT3C : www.banggood.c...
b) Flysky FS-GT5 : www.banggood.c...
c) Flysky FS-NB4 : www.banggood.c...
7) Receivers :
a) For Flysky FS-GT3C : www.banggood.c...
b) For Flysky FS-GT5 with Gyro : www.banggood.c...
c) For Flysky FS-NB4 with Gyro : www.banggood.c...
*** Smart Lipo Battery Tester-Balancer :
www.banggood.c...
*** IMAX B6 Lipo Balanced Charger:
www.banggood.c...
**************************************************************************************************
#wltoys144001 #hobbywingESC #wltoys #rcmodwerks #fastrccars #rcupgrades #rcmods #brushlessmotor
so close bro cant wait to see the 100mph
Thanks ! Hope to hit that goal soon 👍
VERY NICE work!! Just a word of caution... Those foam tires can come apart at those speeds too. Might be a good idea to get a "tire truing" machine, and cut them down some (to reduce the rotation mass of foam around the rims). I had a set of those wheels blow apart on me, and I cut down a second set, so about 3/4 of the foam tire was removed and haven't had an issue yet. Of course, if you do that, they'll have to spin faster (b/c of the smaller circumference) and you'll have to re-gear accordingly. Just hate to see you have another "big wreck". Keep up the GREAT work!
Thanks! Yeah, I´ve made my own tire truing machine and already cut one set of foams into 55 mm diam instead of the original62 mm diam ... I will use that on one of my speed run cars soon 👍
@@RcModwerks23 That's awesome! That thing is SERIOUSLY flying (especially for it's scale)!! Wishing you the best of luck and I'll definitely keep an eye out for it!
@@billymanilli thanks for your support to this channel 👍
144001 no1
Thanks for watching! 👍
I'm getting a Q901 and 979b to go 100mph. Q901 just did 59mph on 3s. Wasn't topped out yet. Might have to bump the pinion up again
100 MPH is quite a tough speed goal for those rc cars , the Worlds Fastest A979B is 87 MPH .
@@RcModwerks23 im better tho
@@RcModwerks23 Q901 did 60mph very easy already. I think its coming
Wanna ask, when i speed up my rc alway fly up, already setting lowered the body. But still same. Any tips for make it heavy or how?
At what speed you get with this issue? Using a heavier battery helps
Great results with your configuration... would you share the components you used?
Thanks, the electronics combo wwas mentioend in earleir videos
What ESC and chassis did you use ?
120 Amp ESC, link in the Description box ... chassis was Stock but I added sidetrays to hold the lipo batteries
Muito louco..👏🇧🇷🇧🇷👏
Thanks for watching 👍
Its on 3s or 6s ?
Dual 3s, 3sx2 = 6s
It is still on 3s using PARALLEL connection ...the ESC used is only capable for 3s or 4s , it will instantly burn on 6s
is it 7500kv brushless?
Nope, the motor KV will be revealed after hitting 100 mph. Thanks for watching 👍
You make my car, original gear 3s 3650 4300kv wp-sc8 120 I got speed 123 I want some strength like you 😭
That is already a good speed for 4300 kv motor and stock gears on 3s .... I am using higher kv motor to get more speed. You can check my other videos where I showed the motor kv used. Thanks for watching! 👍
Hello. What is the best strong servo for 144001. Where I can put with the same mount as original
I use Emax servo, you see from the link shown in the Description.. thanks for watching !
3S 몃mah 를 사용해야 되나요?
You can use 2200 mAh 3s lipo
I would like to know if I could send you my A949 Wltoy for you to rebuild for me if so what would you charge me,I send you the car let you do your thing and you send me the bill and I pay you
I think that will be complicated since the shipment will cost more than the rc car itself. Hope there will be somebody close to you to help you out. If we are on the same place I would surely help you rebuild your car 👍
The problem with that is once he rebuilt the car for you, the very first time you drive it you'll probably hit something because of the speed, and then you'll never be able to fix it on your own
hello very cool project i like the contend. could you alsow link the shocks you used in the desciption? thx
Thanks ! The shocks were only taken from my other 1/16 rc buggy (HSP Troian) so there is no link
I never seen a frame like that before especially for a wltoys model. that was one cool friend I'll tell you that where you can put a single lipo on each side oh, now that's cool looking. I wonder if that has anything to do with the stability of the car
Thanks a lot for watchnig... yes, the sidetrays can help with the stability of the car
hi... i am a new subscribe, i have a question,
when installing 2x battery, do you use series or parallel?
Nice video and god rc car men😎
thanks for the sub 👍 ... I use parallel connection ( positive to posive & negative to negative) so it is still 3 cells but the mAh is doubled
Great run! I might make a speed run car out of mine. What would be your top 2-3 tips? I assume tires is certainly one! :)
What will be your speed goal?
anybody know any good replacement shocks?
The stock shocks are already good, just put the adequate oil for your needs. Thanks for watching!
Where can I buy those TIRES??? Thanks.
I buythemfrom a local rcshop ... but you can search online for "1/10 Foam tires"
Damn what a crash though. I hope the passengers were okay
Yes, nobody was hurt 👍
I watched the funny and informative video well. You have a good hobby. Want to be a close friend.
우리 친구해요.~😀😀
Thanks for visiting
Where did you buy the wing/spoiler?
That was the stock rear wing and removed some parts of it
How did you make longer antenna?
The antenna length is still the original
Did u use stock motor or a better one?
Nope, this one has been upgraded to a brushless motor ... the stock motor can only reach +50 km/h top speed
I am extremely curious about the undercarriage plate that you use on this car… what is it?? Detailed info greatly appreciated! Thanks again!!! Keep em’ coming!
It is a DIY piece made of 1 mm metal plate . Thanks for watching! Check the latest video of this rc car hitting Top Speed = 176 km/h
Привет сколько KV ???????✌️
The motor KV will be revealed after hitting 100 mph. Thanks for watching 👍
I would be glad to pay for all expenses and shipping expenses if your willing take on this project or even if you have one all ready and could sale me one
Thanks for the offer, but I cannot sell any of my car at the moment ... and taking a project from abroad is compicated for me . Hope you can find someone to help you out on your area.
Hey, does the 144001 run 3S Lipo on Stock ESC?
And also since the 144001 is now a bit old, do you have any recommendations for me for a fast rc car under 100€/120$?
The stock ESC was designed only for 2s ... you can run it few times in 3s but will burn eventually. If you want a better car, then check my othe videos of Wltoys 124019 or 124018 .... interesting that they recently released a Brushless version of these rc cars , so I recommend you go fo it.
@@RcModwerks23 Can you send me a link for the brushless because i can't find
@@spoilcoil Sorry, I got confused with the bigger 124019 .. true, the 144001 has No brushless version yet but the 124019 & 124018 already have which are called 124016 & 124017
where did you buy the bumper?
That was a DIY piece
What motor brand you use bro
Castle motor
Thats insane bro...im shakin my head lol...in a good way. Awesome car...& video
Thanks, please check this other video of this same rc car hitting 175 km/h 👍--- th-cam.com/video/QJu17sXx4tw/w-d-xo.html
Really cool but im a bit concerned that if one of those lipos gets punctured its a big flamey mess
Thanks! That rarely happens, and we always need to handle lipos with care
Looks like it got ran over
It was only a direct hit to a steel post at +100 km/h ... I had a previous video when this crash happened... Thanks for watching 👍
Can you make (WLTOYS 12428) go faster? Please
Maybe in the future, for now I dont have that rc car yet
What motor is that?
That was CM36 Neu-Castle motor. Thanks for watching !
Hi there, did you also have the link to the motor your running, I just purchased the car.. thank you.
It is a discontinued product, hope you can find it somewhere : bit.ly/2XNWtsN
Tell me if you were able to get one, and hope it will work well for you 👍
hope my rc cars tyres dont blow up btw great video!
I hope so too! Thanks for watching!
Did you drill out the chassis to swap over the motor &mount ? My issue is finding a motor mount with adjustability
Yes, some drilling is required ... and the A979 motor mount that I used is adjustable
@@RcModwerks23 I'm gonna be stick a 3670 on there and let it rip
Nice Car love seeing them modded
Thanks 👍
That’s moving right along! 😃💯😎👍🏻
Thanks a lot !
Hi, how much is the total spare parts cost u?
Not much, I am not counting the cost , lol... but for sure it is more than the price of the rc car. Thanks for watching 👍
Let get on and convert to another kind of buggy a street one
Yes, I will make a basher setup soon. Thanks for watching 👍
Thank for sharing video friends
Thanks for visiting too 👍
@@RcModwerks23 youre welcome💪💪🥰🥰
so close to 100mph great job on rebuild. 👍👍
Thanks 👍
I just got one of these and noticed there’s a lot of wheel wobble and looseness in the steering. Is there anyway to fix that? Imagine going the speed you do you need the wheels as solid as possible.
It cant be fixed 100% but using shims will reduce it
@@RcModwerks23 Are all RC cars like that or is this one worse than some?
@@mjl6425 Not all rc cars are the same, I have 3 144001s and one of them is worse than the other two
@@RcModwerks23 OK I’m trying to decide between this and the Arma Typhon 3s. Are those wheels and steering loose like the WL toys, in your experience?
@@mjl6425 I dont own Arrma Typhoon but I´m quite sure that it is much better built than the Wltoys.
Very close never give up 👊🏻👍🏻
Yes, we´ll be there someday ... thanks for encouragement 👍
Good job 💪🔥
Thanks a lot ! Please watch the newer videos of this rc car , even faster ! 👍
Can I buy it that build like for $450
Check my FB page and message me there
Omg you will agree my decision
Nice build, what motor you using?
Thanks, the motor is CM36 , 3650 size sensorless brushless
@@RcModwerks23 What is the KV of the motor?
I always mentioned this info in my earlier videos, but now I´m experimenting on different motor KVs so let´s keep that as a little secret at the moment
Motor 3650 ?KV
You can get the stock version of this rc car RTR (Ready To Run) from below link 👇 :
www.banggood.com/custlink/mmGhtBBgAI
Please check also the Description for the links of UPGRADES 👍
When I got mine I got foamz auto
That´s great ! Hope you enjoy this hobby. Thanks for watching 👍
That thing went faster than I thought 😳
Thanks! Yes, it´s very fast !
What are the side tray made from?
It was made from a thin metal plate. Thanks for watching ! 👍
Great build where get the spur gear from link plz
I bought it here: bit.ly/2ELg9aG
RC ModWerks Thank you for the information
@@manny5122 you are welcome
Nice rebuild and run 👍🏁
Thanks for your support , appreciate it 👍
Wow that's awesome !!! What engine is used?
Thanks, the motor is CM36-3650 size sensorless brushless
@@RcModwerks23 Thanks, I ordered earlier a CM36 in 7700 kv I will order the ESC Hobbywing EZRUN WP SC8 120A-RTR or the Surpass 120A Hobby KK I will receive a 124019 that I will assemble with this motor and a 144001 that I will fit with a motor in 2838
@@rafinijean-michel2425 That will be an awesome build !
What is the setup?
I mentioned this info in my previous videos
Hello, as good as always 👌🏻👌🏻👌🏻.
Thanks for your support 👍
Nice. Good job.
Thanks for watching 👍
Nice run!
Thanks!
WOW!
Thanks for watching 👍
Where can I get your tires for my 124019?
I buy mine from a local hobby shop, but you can check this link: www.amainhobbies.com/search?s=touring+tires+foam