@@ElectroRetro How? Where on the diagram you can see due to what? Change the capacitance of the capacitor? I would like to do this with a variable resistor.
Hi guy, great job!! ;)) In my project I only used a NE555 and recycled relays. I had some problems with continuous use. After various tests I realized that the motor slipped so I opted to power it at 3 volts. ;) FF
Nice video
🤩
⚡⚡⚡⚡
pcb shaking machine video Super nice
Grate idea. thank you 😊
Sir read switch no hai ke nc hai, thanks
Amazing PCB Etching Maching.
Thanks
Well done bro
Is it possible to add speed control?
Yes
@@ElectroRetro How? Where on the diagram you can see due to what? Change the capacitance of the capacitor? I would like to do this with a variable resistor.
You can add a motor speed control circuit to the input.
@@ElectroRetro Input pcb or output to motor? Can you send image?
@@yurikostsov8697 input
Hi, Is this board in Lay6 format by any chance?
Sorry, I have not made the pcb layout.
@@ElectroRetro ok
Very good keep going
What voltage is that motor rated for?
4v
@@ElectroRetro So will 3.3V work well?
Yes
@@ElectroRetro What about 5v? Will it fry it?
P.S. My motor is a RF-300C-13300
You can power it with 5v.
Hi guy, great job!!
;))
In my project I only used a NE555 and recycled relays.
I had some problems with continuous use. After various tests I realized that the motor slipped so I opted to power it at 3 volts.
;)
FF
Cool
Great idea but H-bridge is wrong.