2017 Chevy Silverado - 2" Level & 33x12.50 MT's
ฝัง
- เผยแพร่เมื่อ 18 ต.ค. 2024
- Leveled and threw on the 33" Tires and 18x9 Fuel Mavericks from the Tacoma over to the Silverado. It Fits! Like, Comment, Subscribe. More content coming soon!
33x12.50R18 Yokohama Geolandar Mud Terrain
18x9 (-12 Offset) Fuel Maverick (6x5.5)/(6x139.7)
Previous Truck (Wheel/Tire/Suspension/Performance/Lighting/Etc.) Setup:
www.customwhee...
Twitter: @ktTRAN24
Instagram: @ken_nytran
Snapchat: kenny_san21
Song name: Flexy Cracky - Sweet Dreams [No Copyright]
• Flexy Cracky - Sweet D...
Glad to see another Asian brother on the Silverado side. My family been buying Chevy trucks here in Northern California since World War 2. They were born in Stockton CA and became huge farmers. Guess it runs in my veins. But yeah man, don’t know how I ended up on your video. It’s exactly what I been looking for. Had this same exact suspension idea in my head, and you’ve convinced me to do the same with mine. I don’t think you mentioned your suspension set up, but I was just going with the Eibach front adjustable shocks and stock coil overs but to fit 20x10 33’s though. I just wanted to level that front rake and hoped just the front shocks replaced would help. Didn’t need the stiffer coil over springs because I wasn’t planning on taking it off-road. I live in the valley and rarely see dirt or snow. How’s your current ride now? You just got another subscriber btw. 👍🏼
I just have a basic or budget 2” lower strut spacer and haven’t had any wearing issues quite yet! I would say that the ride is like stock but the rougher ride is definitely from the mud terrain in my case!
As always, Welcome to the channel! I am in the process of doing an exhaust and a follow up video but my work schedule has been hectic!
I want the exact same setup basically. Not sure if I want to go down to 18s or not tho, the stock 20s do look pretty good. Definitely getting the Mavericks though and a 33x12.5
I had a free set and decided to use the 18’s. 20’s would look amazing though. I also have a new suspension setup btw. Stay tuned!
I jus put fox 2.0 coilovers on my truck it sits perfectly
I'm putting 33s on my stock gmc sierra 2018 and was told they would fit without level kit kepp8n my fingers crossed
Looks awesome
Thanks! Are you getting one on yours too?
@@KennysLyfe not sure ,looking at different options for now ,thnx for the info
Okay so how much do they rub? I really want 18x9 wheels but I can’t find any good looking ones but yours look good. What tires are they and the specs?
They are 33x12.50R18 Yokohama Geolandar Mud Terrains. A similar tread design to the Toyo Open Country MT’s but a much more aggressive sidewall and a bit more affordable. Rubbing is not bad! I also will be having a ~ 6 month lift update video showing the overall stance/fitment and hopefully exhaust video this weekend.
Stay tuned, hope that helps!
Si quema cuh
I bought the ruff country 2in front level kit that goes on the bottom of the strut. Think ill be able to do 275-60r20 without issues?
I currently have 33x12.50R18 but they’re nearly 13” wide. I don’t have any issues besides minor rubbing when you drive on certain angles.
Best of Luck!
I put some 33-12.50-22 ridge grappers on a 17 silverado oem wheels with 2” level kit they rub a lil bit on the upper control arms only went i do full turn.
The positive offset may cause some rubbing if you have a 12.50 wide. On Tacomas, I’ve seen people trim a part of their UCA’s or get a spacer. Depending on where you drive,How often would you say that you would have to do a full turn?
Did u have any problems with Tacoma being 12mm lug strud And Chevy 14mm??
I had to get new lug nuts for the Silverado but the wheels were just fine. This especially when I added the hub rings - in fact I still have the same ones until this day!
@@KennysLyfe did u put spacers on the back??
@@elcompalio9940 The back is stock. I don’t plan to add any wheel or spacer blocks in the rear. The front wheels are only sticking out about an 1” or less - as compared to the rear.
I texted you on Instagram have a question would really help bc they don’t want to bolt all the way back to the wall
@@elcompalio9940 i got back! what size you running?
Those stock tires are garbage 21k on my 2015 and they were 3/4 of the way done. 2.5 inch kit in the front 3” inch blocks in the rear (I tow a big salmon boat) so I wanted the factory looking rake that leveled when towing. 33x12.5r20 radar renegade r/t with -19 offset wheels. It’s my driving to work truck have another Silverado 285/70r17 federal xplora rt 0 offset and a 3/4 ton gmc I use for work on my farm
What’s the tire and wheel set up?
They are 33x12.50r18 Yokohama Geolandar Mud Terrains on 18x9 Fuel Mavericks w/ Milled Accents (-12 offset).
Do they rub
Yes but very minor. That’s very specific for this setup and with 33’s. It’s very manageable!
Did you use hub centric rings or notice any vibration?
I used them on the truck and haven’t noticed any vibrations from the wheels, just a slight bit from the M/T’s but haven’t had any problems!
how much air do you put in it
Usually 35 PSI
Do they rub?
They do a little bit, definitely manageable!
2wd or 4wd?
2WD!
What ris the rim brand ???
They are the Fuel Mavericks (18x9”)
Heres the full specs when they were on the Tacoma:
www.customwheeloffset.com/wheel-offset-gallery/713356/2010-toyota-tacoma-fuel-maverick-bilstein-suspension-lift-25in
Rims 18 ?
Yes they are 18x9” rims. They also clear the brakes with no issue.
Defiantly not leveled my friend
Hey Kyle! It’s definitely a more conservative kit. So only the rake from the body seems more level, but the clearance itself won’t be as much. However I’m actually going to be doing a slightly different set up later next month. Let me know how you think it looks around then. I think you’ll like it - Cheers!