What a great kit! If I could add anything, it would be: 1) Klein 2100-9 scissors, 2) an 11mm socket (for M7 and 1/4" bolts) and 3) a 14mm socket for 3/8" bolts. The most common bolt sizes are M5, M6, M7, M8, 1/4", 5/16" and 3/8". The 8mm socket fits the M5 and the 10mm socket fits the M6. The 13mm socket fits the M8 and 5/16". But you don't have the M7, 1/4" or 3/8" bolts covered with the Wera set. To save space, I use Klein flip sockets. They make an 8/10mm and a 13/14mm. All I do is add an 11mm Makita. Boom, 7 major bolts covered in 3 pieces. I believe you can add these to your Wera toolcheck. Other things to consider depending on your needs: some paper to make notes on, and maybe a headlamp or a flashlight with a magnetized base, preferably with a flexible head, some NiteIze gear ties, flat roll of duct tape, utility blade, Hoto precision driver, pry bar, voltage detector, bolt cutter, forceps.
You always have the best feedback Parker! Thank you so much! 🤗 I know the Klein flip socket sets. Might get some in the future for my car since it's one shaft with all the sockets. The headlamp yes, I have the Nitecore NU25 UL which is the next review and with a magnetic base, yes the light for the video was provided by the Wuben L1 torch, the one with a pivoting head and dual ligh output. 😁 How I manged to bounce the light off the walls without it being too intrusive. As for the rest, some are in my generic big tool box with my Bahco 3/8 socket set and the Hazet 916 1/2" set. Once again, massive thank you!
excellent, similar to mine, its good that you also have a glue stick, one of the most heavily used of my kit, i sometimes melt the zip ties too. i would also suggest low heat solder that you can use with a lighter, tent repair patches, wire of different gauges, a tshank hacksaw blade, scalpel blade +with tshank holder, although also fits in surge bitdriver) , mini mole grips, hand drill, 9v pencil soldering iron, ranger bands, shock cord
Thank you for the suggestions as well! Any t-shanks yeah, the Surge will handle it. For the rest of the larger items, I migh upscale everything in the bigger vanquest ftim 6x9 pouch. Will see. Thanks again.
What a great kit! If I could add anything, it would be: 1) Klein 2100-9 scissors, 2) an 11mm socket (for M7 and 1/4" bolts) and 3) a 14mm socket for 3/8" bolts.
The most common bolt sizes are M5, M6, M7, M8, 1/4", 5/16" and 3/8". The 8mm socket fits the M5 and the 10mm socket fits the M6. The 13mm socket fits the M8 and 5/16". But you don't have the M7, 1/4" or 3/8" bolts covered with the Wera set.
To save space, I use Klein flip sockets. They make an 8/10mm and a 13/14mm. All I do is add an 11mm Makita. Boom, 7 major bolts covered in 3 pieces. I believe you can add these to your Wera toolcheck.
Other things to consider depending on your needs: some paper to make notes on, and maybe a headlamp or a flashlight with a magnetized base, preferably with a flexible head, some NiteIze gear ties, flat roll of duct tape, utility blade, Hoto precision driver, pry bar, voltage detector, bolt cutter, forceps.
You always have the best feedback Parker! Thank you so much! 🤗
I know the Klein flip socket sets. Might get some in the future for my car since it's one shaft with all the sockets.
The headlamp yes, I have the Nitecore NU25 UL which is the next review and with a magnetic base, yes the light for the video was provided by the Wuben L1 torch, the one with a pivoting head and dual ligh output. 😁 How I manged to bounce the light off the walls without it being too intrusive.
As for the rest, some are in my generic big tool box with my Bahco 3/8 socket set and the Hazet 916 1/2" set.
Once again, massive thank you!
excellent kit my friend!
Thank you very much!
excellent, similar to mine, its good that you also have a glue stick, one of the most heavily used of my kit, i sometimes melt the zip ties too. i would also suggest low heat solder that you can use with a lighter, tent repair patches, wire of different gauges, a tshank hacksaw blade, scalpel blade +with tshank holder, although also fits in surge bitdriver) , mini mole grips, hand drill, 9v pencil soldering iron, ranger bands, shock cord
Thank you for the suggestions as well! Any t-shanks yeah, the Surge will handle it. For the rest of the larger items, I migh upscale everything in the bigger vanquest ftim 6x9 pouch. Will see. Thanks again.