My burgman 650 wouldn't go past 1st sometimes 2nd I tried cleaning the center stand switch then replaced the sensor still was stuck in first gear I then saw this post and another post so I ordered the pulley bolt but I couldn't wait so I went up under the bike and saw the pulley bolt was not tightened I tightened it and bam I was just doing 85mph thank God for this video 🔥🔥🔥
Thanks so much for this video Ledude. I just whipped my bolt out and it was munted . Not broken but pretty well chewed. I bought the scoot cheap as a non moving bike. It sounded mint presented well and was cheap so I took the risk. Through various online films I've worked out what isn't wrong with the scoot and only just came across this film. I'm hoping a new bolt will restore drive , if it doesn't then I'll test the wheel speed sensor next. Maybe the gbox is stuffed allready but a cheap bolt won't hurt to try for life. Thanks again you rock mate
Just bought a 2006 with 5000 miles... 2 tiny nicks in mine.. Replaced original soft bolt with new Suzuki grade 9 at $7 from the Suzuki dealer.. part # 21748-10G10.. Thanks for posting!!
haaaaaaaaaaaa, finally I see this bolt and the type of damage to look for. Thanks for the hint guys ! Answer to why it needs to be changed : This bolt wears out, and needs to be changed before it breaks. If it breaks, the whole transmission can be destroyed immediately after. That's why. Why does it break ? Wrong design. Solution ? Replace existing bolt with new Suzuki grade 9 at $7 from the Suzuki dealer : part # 21748-10G10
Thanks for your quick reply to my question. I did watch this/your DYI vid on changing this bolt, However I must have missed the reason why it needs to be chnged.
What is the major re-build required on the Burgman 650 at 35k to 50k miles? My bike is at 36k miles and I'm worried that the repair shops aren't interested in repairing the bike, more interested in me buying something new.
For everyone asking what If that pulley wasn't in place or lossen , then you would get a grinding noise , fail to move fast as when your engine RPM is over 6 , your actual speed is barely 30 km/h , and finally you would get a very loud noise just like a super jet fan.
the 2010+ 650 got an upgraded bolt, you should check online or with your dealer to make sure you get the correct bolt, the new one is longer than the old one. check my CVT Repairs DIY on my burgman center if you want to see the difference.
In my case cured 2 issues: 1) A rattling noise that got worse over time, felt like coming from a loose exhaust, sounding similar to the "diesel" noise; 2) After full oil change, it would not shift up as expected, but rev up to 6-7000 and then slowly come down in revs. Found mine with the smooth part of the bolt almost gone.
Im about to buy a 650 2011 and fiind this on problems searching. So the "legendary" cvt failure of this model is becouse of this small bolt? Is there anything I should look for?
no reason why you should not buy the scoot the primary pulley bolt is not at the heart of the cvt problems, but can cause issues if it wqears out 2005+ Models have a better primary pulley adapter design
@@LeDude00 please what is the cause of the breakage of the bolt my scooter is giving me that problem. The bolt break and we don't get to bye. Please help repair my scooter. What should I do?
Please I really need you help I have the same bike but the problem I have is that the shaft stop bolt breaks and when we replace it, it will break again within same few days. Please what could be the cause of the problem? Please help me solve this problem.
Tbolt is probably miss aligned with the primary pulley slot make sure you have the right bolt for your model year check this diy for data and pics docs.google.com/document/pub?id=1n4d0f0AhGsfNlAilwXJD3tlZxnLhxtoth8ei4jLDj7c
what actually is grinding the edges of the bolt? Wouldn't it be better to just chop the part of the bolt after the threads so the part that's grinding the bolt doesn't fall get more damage? It's obviously grinding against something.
@@LeDude00 I tried cleaning the center stand switch then replaced the sensor still was stuck in first gear I then saw this post and another post so I ordered the pulley bolt but because of your comment I couldn't wait so I went up under the bike and saw the pulley bolt was not tightened I tightened it and bam I was just doing 85mph thank God for this video 🔥🔥🔥
No, i 400 hanno come trasmissione frizione centrifuga, variatore con rulli collegati con cinghia. Il 650 ha la trasmissione a cascata di ingranaggi... Nessun variatore con rulli e frizione centrifuga
@@LeDude00 please my breaks and I want to know the cause of the break it giving problem my mechanic has tried but still. And we don't get to bye too. Please am begging please help with the cause so the get my bike beck.
AFAIR The bolt in question holds in place the CVT steering. See /watch?v=292p96ZBloc One can clearly see the damage - if you allow the bolt to get lots of clearance, it will amplify the damage.
@THEJEDEYEMASTER Thanks again for the reply. I thought the tip (above the thread) of the bolt sits inside something. I thought it was holding it in place. If it doesn't do anything, then why doesn't Suzuki make the bolt short enough so the end doesn't go all the way up to the area being grinded down? Can I really just cut the end of the bolt and not have to worry about it? thanks again.
Only one hand on the torque wrench please, and the addition of any extension changes the delivery so try to do it without any extensions or adapters...
sorry to be off topic but does anyone know of a trick to log back into an Instagram account..? I was stupid lost my password. I appreciate any assistance you can give me!
@Leandro Marley I really appreciate your reply. I got to the site on google and Im in the hacking process atm. I see it takes a while so I will reply here later when my account password hopefully is recovered.
My burgman 650 wouldn't go past 1st sometimes 2nd I tried cleaning the center stand switch then replaced the sensor still was stuck in first gear I then saw this post and another post so I ordered the pulley bolt but I couldn't wait so I went up under the bike and saw the pulley bolt was not tightened I tightened it and bam I was just doing 85mph thank God for this video 🔥🔥🔥
how do we speak,text,or communicate ?
i will try that i just replace the back brakes then the same issue start to happens to me before i change brakes was riding perfect
stays on firt gear no matter what the buttons on lefht handle non response even on maunal
Thanks so much for this video Ledude. I just whipped my bolt out and it was munted . Not broken but pretty well chewed. I bought the scoot cheap as a non moving bike. It sounded mint presented well and was cheap so I took the risk. Through various online films I've worked out what isn't wrong with the scoot and only just came across this film. I'm hoping a new bolt will restore drive , if it doesn't then I'll test the wheel speed sensor next. Maybe the gbox is stuffed allready but a cheap bolt won't hurt to try for life. Thanks again you rock mate
Just bought a 2006 with 5000 miles... 2 tiny nicks in mine.. Replaced original soft bolt with new Suzuki grade 9 at $7 from the Suzuki dealer.. part # 21748-10G10.. Thanks for posting!!
haaaaaaaaaaaa, finally I see this bolt and the type of damage to look for. Thanks for the hint guys !
Answer to why it needs to be changed :
This bolt wears out, and needs to be changed before it breaks. If it breaks, the whole transmission can be destroyed immediately after. That's why. Why does it break ? Wrong design. Solution ?
Replace existing bolt with new Suzuki grade 9 at $7 from the Suzuki dealer :
part # 21748-10G10
Thanks for your quick reply to my question.
I did watch this/your DYI vid on changing this bolt, However I must have missed the reason why it needs to be chnged.
Is it the same part number for a 2011? Thanks for posting.
greetings, is the same screw for the burgman 650 2014, and does it have the same problem
What is the major re-build required on the Burgman 650 at 35k to 50k miles? My bike is at 36k miles and I'm worried that the repair shops aren't interested in repairing the bike, more interested in me buying something new.
Do i need to change mine? 2017 model with 3k miles on it.
Hi friends 👋 I have a Suzuki burgman 650 ....a 2010 model.. please which bold should I buy the short or long one please advise.
check a parts catalog online for your model yeazr
Cheap and simple to fix and replace, so change that bolt once every twelve months and ride hassle-free.
Do the plastics need to come off to get to the bolt?
no
thanks LeDude i changed in my burgman and it worked.
Did U lose drive and get it back after bolt replacement ? Cheers
The bolt seems accessible on my 2014 Burgman without the removal of the tupperware.
For everyone asking what If that pulley wasn't in place or lossen , then you would get a grinding noise , fail to move fast as when your engine RPM is over 6 , your actual speed is barely 30 km/h , and finally you would get a very loud noise just like a super jet fan.
I see parts for 2006 to 2010. Does this apply to my 2012 650 Exec?
the 2010+ 650 got an upgraded bolt, you should check online or with your dealer to make sure
you get the correct bolt, the new one is longer than the old one.
check my CVT Repairs DIY on my burgman center if you want to see the difference.
@@LeDude00 Looks like there is an even newer version now. 10G20.
Does this need to be done on the 2013 Burgman?.
IT SHOULD BE CHECKED ON ALL MODEL YEARS
What is the reason this bold need to be changed?
Any symptoms I should look for on my Burggy?
Was this question answered for you and if so, can you please tell me why it needs to be replaced?
There are no symptoms but when it fails you cvt gets messed up. It holds the shifting pulley when it moves.
In my case cured 2 issues: 1) A rattling noise that got worse over time, felt like coming from a loose exhaust, sounding similar to the "diesel" noise; 2) After full oil change, it would not shift up as expected, but rev up to 6-7000 and then slowly come down in revs.
Found mine with the smooth part of the bolt almost gone.
Im about to buy a 650 2011 and fiind this on problems searching. So the "legendary" cvt failure of this model is becouse of this small bolt? Is there anything I should look for?
no reason why you should not buy the scoot the primary pulley bolt is not at the heart of the cvt problems, but can cause issues if it wqears out
2005+ Models have a better primary pulley adapter design
@@LeDude00 please what is the cause of the breakage of the bolt my scooter is giving me that problem. The bolt break and we don't get to bye. Please help repair my scooter. What should I do?
Please I really need you help I have the same bike but the problem I have is that the shaft stop bolt breaks and when we replace it, it will break again within same few days. Please what could be the cause of the problem? Please help me solve this problem.
Tbolt is probably miss aligned with the primary pulley slot
make sure you have the right bolt for your model year
check this diy for data and pics
docs.google.com/document/pub?id=1n4d0f0AhGsfNlAilwXJD3tlZxnLhxtoth8ei4jLDj7c
what actually is grinding the edges of the bolt? Wouldn't it be better to just chop the part of the bolt after the threads so the part that's grinding the bolt doesn't fall get more damage? It's obviously grinding against something.
Its this on the 400 burgman also or 650 only?
Could this be the reason my burgan won't Rev past 3000rpm or past 1st or 2nd gear
PROBABLY NOT CHECK YOUR SIDE STAND AND CENTER STAND SWITCHES
@@LeDude00 I tried cleaning the center stand switch then replaced the sensor still was stuck in first gear I then saw this post and another post so I ordered the pulley bolt but because of your comment I couldn't wait so I went up under the bike and saw the pulley bolt was not tightened I tightened it and bam I was just doing 85mph thank God for this video 🔥🔥🔥
@@geenogolden407 GLAD IT WAS AN EASY FIX
Is there one on the 400 to check?
No, i 400 hanno come trasmissione frizione centrifuga, variatore con rulli collegati con cinghia.
Il 650 ha la trasmissione a cascata di ingranaggi... Nessun variatore con rulli e frizione centrifuga
That was the noise i heard when i was in the corners. now it's gone..33,333 miles
Thank you so much for the post... great tip.
My motorcycle 2013 model.35.000 km. Do I need to change?
it is always a good idea to at least inspect it, especially on the older 650s
@@LeDude00 thank you.
@@LeDude00 please my breaks and I want to know the cause of the break it giving problem my mechanic has tried but still. And we don't get to bye too. Please am begging please help with the cause so the get my bike beck.
AFAIR The bolt in question holds in place the CVT steering.
See /watch?v=292p96ZBloc
One can clearly see the damage - if you allow the bolt to get lots of clearance, it will amplify the damage.
@THEJEDEYEMASTER
Thanks again for the reply. I thought the tip (above the thread) of the bolt sits inside something. I thought it was holding it in place. If it doesn't do anything, then why doesn't Suzuki make the bolt short enough so the end doesn't go all the way up to the area being grinded down?
Can I really just cut the end of the bolt and not have to worry about it?
thanks again.
Nooooo i hope you did not do that?
Mine Burgman 650, 2016 part # 21748-10G20, the part # 21748-10G10 it's too short, and 20 it's black and little longer.
I WOULD CHECK WITH A SUSUKI PARTS DEALER TO M AKE SURE YOU ARE GETTING THE RIGHT PART FOR YOUR MODEL YEAR
Only one hand on the torque wrench please, and the addition of any extension changes the delivery so try to do it without any extensions or adapters...
Thanks. I did not know that!!
Thanks LeDude, my local dealer asks €70,- for this job.
26 lbs-ft or 26 lb-ft ?
26 lb-ft is 35,25 Nm... right?
26ft·lb sind umgerechnet 35,2513Nm
Thanks again for a wonderful educational video.
sorry to be off topic but does anyone know of a trick to log back into an Instagram account..?
I was stupid lost my password. I appreciate any assistance you can give me!
@Axton Fletcher Instablaster =)
@Leandro Marley I really appreciate your reply. I got to the site on google and Im in the hacking process atm.
I see it takes a while so I will reply here later when my account password hopefully is recovered.
Thank you
35,2513 Nm
Your intro says no tupperware needs to be removed to get the job done, yet the tupperware seems to be gone in your video (?).
So you can see it better in the video. But you dont need to
I just subscribed
Great site....thanks LeDude.
OMG thank you!!!!!!!!!!!!!!
Is there a milage point where this should be done?
Once a year, I believe. Don't wait too long. It's a cheap fix as opposed to a catastrophic repair...
They say once a 12000 miles
@@patrickslompddv - i decided to change it out every 10,000 miles just to be in the safe side.