Very Old Kerosene Stove Restoration - Optimus No:45
ฝัง
- เผยแพร่เมื่อ 22 พ.ค. 2024
- Hello, my good friends, this is a very old kerosene stove . that is completely destroyed, and in this video I decide to restore it and return it to its former glory. The body and tank are completely oxidized and full of mass and dirt. The burner is buried under the soot. I have to rebuild the brass and steel legs of the stove and I also have to make a new pump bar for it. I hope you enjoy watching this video and it is useful for you.
.....
Time stamps
0:00 First look
0:36 Open the burner
1:10 Three steps to remove dirt from the stove first : physically
2:04 second : Dish washing liquid
3:05 third : washing with gasoline ⛽
4:48 How to clean a sooted stove burner
5:29 How to make three brass stove pipe legs
7:51 Soldering the new brass pipe legs to the stove tank
9:25 How to Scraping and removing excess tin and solder from the stove tank
11:48 How to make a stove pump rod
14:21 Final cleaning
16:19 How to make stove steel legs
17:26 Polishing stove surface
18:16 Assembly of parts
18:40 How to make pump leather
20:31 Final reveal
........
......
#unique_restorations_videos
#kerosene_stove_restoration
#Restoration_videos
#optimus_stove
#old_stove_restoration
....
Check out the latest videos here 👇👇
/ @unique_restorations
....
..
Music license is :
FREE TH-cam MUSIC LIBRARY FOR CREATORS
Thanks to TH-cam and dear viewers
Great restoration as always ☺☺
Thanks again!🎉🎉
Good work good luck 👌👌
Thank you so much🎉
Beautiful.. don't light it put it up as a display
Exactly, I was going to light it, but the flame made the torch black
Lovely job , but 22 minutes of my life wasted waiting for you to fire it up .. that is the true test.. another shelf queen
Hi friend, I will do this in the next videos, one of the reasons why I didn't turn it on is because the burner would get dirty and black again.
Clearly shows that you are skilled enough to carry out any restoration work but in this case you didn't fire up the primus simply because in won't fire up. the valve inside the pump sleeve is clogged for certain; there is a special tool for removing this valve and I was waiting to learn from you how you will handle this; you simply ignored it. there is also a flame ring missing.
Hello my friend, thank you for your attention. In fact, the reason why I did not turn on this light was because the burner was turning black again. Regarding the valve, the valve was completely healthy. By the way, I have a special tool to open that valve, which in the future I will definitely show you this step when I restore another one
Test?
I will try to make a short video soon🙉