Love this cooler with the sickle flow rgb fans (better lighting and air pressure)... Only miss that doesn't have 6 heat pipes, but for the price can't complain 👌🏼
Yo man how's it going, i have this cpu cooler its really good but it blocks a ram ddr port so i was wondering wheather i can move the front fan a bit so i can fit my ram if i wanted to upgrade it in the future.
gonna have to improvise a lot, what i did is i removed the rubber between the clip and the fan, gave me enough space to put the ram. or just change the fan to an arctic p12 slim / argb if you like. or you can just buy low profile ram lng the tforce tuf or corsair vengeance low profile.
pde nmn po rekta sa mobo ung argb header, ng controller po if im not mistaken coconnect mo sa sata power un tapos ung fans doon mo icoconnect sa controller
sir ask ko lang po since naka aorus mobo din po kayo, same rin po kasi tayo ng cooler and mobo ko po is b550m aorus elite tas once na nag set ako ng color dun sa rgb fusion 2.0 hindi tumutugma sa fans, sainyo rin po ba? tulad po ng pink, pag nag pick ako ng color na pink, yung fans ko nagiging cyan yung color tas yung ram ko pink naman (ram ko is AORUS RGB Memory 16GB (2x8GB) i hope you would reply to my comment :)), btw nice review sir keep it up!!
Bka defective po argb nang fans, mdmi pong factors either sa software or un nga defective ung rgb pde din baka naka set ng 12v ung argb ng mobo, skn kc ganun may pins sa may mobo to set if 12v or 5v ang ilalabas na voltage sa argb.
@@siegtv9305 ohhh okay po thanks po, ask ko lang sir kung normal lang yung nag wwoble ng konti yung cooler yung parang naninigas lang siya pero di naman ganun ka lala
@@gambino1575 ng wowoble habang umaandar? or nag wowoble pg ginagalaw mo? kc never ko na exp nag wowoble ung skn pg umaandar, baka hndi naka install ng maayus ung cooler icheck mo nlng ng mabuti sir
sa argb header po nang motherboard connect po, wag na po gamitin ung kasamang argb remote, diretso na po ung fans sa mobo tapos gmt po kau ng aura sync.
@@siegtv9305 | But it didn't block the ram slot right? I mean were you able to put your ram in 4th slot perfectly? I have gskill ripjaws V. will there any problem?
@@siegtv9305 | I have Gskill ripjaws v rams. Do you think it will work if I do the same like you? Actually I want to buy this cooler so I wanna know... 😅
Love this cooler with the sickle flow rgb fans (better lighting and air pressure)... Only miss that doesn't have 6 heat pipes, but for the price can't complain 👌🏼
Couldn't agree more!
Yo man how's it going, i have this cpu cooler its really good but it blocks a ram ddr port so i was wondering wheather i can move the front fan a bit so i can fit my ram if i wanted to upgrade it in the future.
gonna have to improvise a lot, what i did is i removed the rubber between the clip and the fan, gave me enough space to put the ram. or just change the fan to an arctic p12 slim / argb if you like. or you can just buy low profile ram lng the tforce tuf or corsair vengeance low profile.
any issue with big ram size?
it will touch the last slot, but it can be fixed by removing the rubber paddings in the middle of the cooler and the fan.
i just bought it you recommend it for 5600x?
Yes better than the stock cooler.
How to change the argb color ? Is there any software ? I'm using gigabyte ds3h b450m motherboard
Just use the gigabyte fusion, make sure your argb connectors are connected directly to the motherboard
@@siegtv9305 I already installed gigabyte fusion but only the ram is showing on the dashboard
@@NJaaayeeee make sure you connect the cooler's argb directly to the motherboard. dont use the connector with the button thingy.
Is it compatible with antec nx292 case??
yes it will
Sir baka pwede patulong. dalawang male yung isang fane ng cpu yung isa female and male hindi ko mapailaw yung isa.
bili kapo ng female to female argb splitter po tapos bili karin ng argb pins pra ung female na fan pde mopo saksakan ng argb pins un pra maging male.
What software did you use for rgb control?
i use gigabyte fusion cuz i have a gigabyte motherboard
is it good? im about to buy it for the
AMD Ryzen 5 5600X AM4 Tray
yes better than wraith prism. wraith prism is already good for 5600x. you get what you pay for.
Sir should I configure the fan on the left side by placing it the other way around? (Push/Pull method) Thanks in advance!
It is already pre configured as push pull, the rear fan is not build like any other fans, it is built as exhaust.
Bat po bitin ung bracket ng saken? Compatible naman po motherboard ko
baka mali po ung bracket na nailagay, 2 yan pang amd and intel
boss di ko alam pano I cconnect yung argb na controller
pde nmn po rekta sa mobo ung argb header, ng controller po if im not mistaken coconnect mo sa sata power un tapos ung fans doon mo icoconnect sa controller
ask ko lang pag walang argb yung mobo ko san ko pwede ikabit yung argb nya?
01:05 may kasama xa argb controller doon mopo isasaksak pag wla po argb header ung mobo mo po
@@santaignaciafirestation180 thanks ask ko lang ano ang mas ok in terms of performance ito or yung arctic freezer 34 esport duo?
@@blackthorne2001 havent tried pero leaning ako sa arctic as ive changed my fans to arctic p120s nag improve ung temps kht papano.
@@siegtv9305 thanks
Ask ko lng sir kung ma sync ko dn ba ang cooler lightings sa id cooling argb fans via controller and hub? Salamat po!
diko lang alam sa controller nang id cooling pero sakin na daisy chain ko nmn xa sa ibang argb fans tapos sync sila lahat.
@@siegtv9305 may controller kayong gamit sa pag sync sir? Or direct na sa mobo software?
Direct po sa mobo, using rgb fusion
Salamat po sir!
It holds the intel core i7 11700F ?
Yes it can
sir ask ko lang po since naka aorus mobo din po kayo, same rin po kasi tayo ng cooler and mobo ko po is b550m aorus elite tas once na nag set ako ng color dun sa rgb fusion 2.0 hindi tumutugma sa fans, sainyo rin po ba? tulad po ng pink, pag nag pick ako ng color na pink, yung fans ko nagiging cyan yung color tas yung ram ko pink naman (ram ko is AORUS RGB Memory 16GB (2x8GB) i hope you would reply to my comment :)), btw nice review sir keep it up!!
Bka defective po argb nang fans, mdmi pong factors either sa software or un nga defective ung rgb pde din baka naka set ng 12v ung argb ng mobo, skn kc ganun may pins sa may mobo to set if 12v or 5v ang ilalabas na voltage sa argb.
@@siegtv9305 ohhh okay po thanks po, ask ko lang sir kung normal lang yung nag wwoble ng konti yung cooler yung parang naninigas lang siya pero di naman ganun ka lala
@@gambino1575 ng wowoble habang umaandar? or nag wowoble pg ginagalaw mo? kc never ko na exp nag wowoble ung skn pg umaandar, baka hndi naka install ng maayus ung cooler icheck mo nlng ng mabuti sir
Sir pano po ma sync in your argb sa mobo using tuf b450m pro? Thanks!
sa argb header po nang motherboard connect po, wag na po gamitin ung kasamang argb remote, diretso na po ung fans sa mobo tapos gmt po kau ng aura sync.
R7 5700x on stock?
On stock yes but if overclocked get a more beefier tower like noctua nhd15
Is it heavy?
468g, its just standard for a tower cooler, any mobo can handle this cooler.
thanks bro!"
ur welcome sir
Nakaayos na po ba yan na push pull config? O kailangan pa na baligtarin yung isang fan?
naka ayos na po, ung isang fan sa likod pang pull config tlga xa.
Hi bro, is it possible for one fan to rotate faster than the other? one goes to 1800rpm and the other to 1300rpm max
yeah if you plug them on separate headers then just make a profile for each.
sir saan mo nabili yan? thanks
megatechzone po dito sa tarlac city
your fans are installed wrongly
it supposed to be pull push configuration..
it is push pull, the rear fan is built differently from a normal fan that is why i showed it.
look closely at 2:49 the blades are made for exhaust, it is inverted compared to a normal fan.
"wrongly"
is this cooler have ram clearance issue?
Yes, it hits my trident z if placed on slot 4
@@siegtv9305 | But it didn't block the ram slot right? I mean were you able to put your ram in 4th slot perfectly?
I have gskill ripjaws V. will there any problem?
@@md.fahimurrahmanimran4437 had to remove the rubber anti vibrations pads from the fans for me to fit the 4th ram
@@siegtv9305 | I have Gskill ripjaws v rams. Do you think it will work if I do the same like you?
Actually I want to buy this cooler so I wanna know... 😅
@@md.fahimurrahmanimran4437 might work, trident z are bigger