Mine just came in today. Thank you! I modified it to fit my Bulgarian. It won't win any beauty awards, but neither will the stock that came with it. Mine was missing both the drop in wedge block washer and the tang well nut. So since I was installing it on a milled receiver I just used the receiver screw and put it up through the tang screw hole and used the wedge block nut. :)
“Slide the butt stock off the receiver.“ I think you mean: “Anchor it in the vice and yank on it until the point that you think your gun is going to break.“ Lol
Thank you for the great installation video. Content like this keeps me buying from Brownell's. I'm new to AKs and I had purchased a PSAK-47 build kit from Palmetto State Armory. They have a good assembly video, but it was for the not-so-nice polymer stock, so there was nothing for the Zhukov, even though that was the stock in the upgraded PSAK-47 build kit. Brownell's to the rescue!
One tip: If you didn't get the front screw (I didn't!) tighten the wedge block first, then tighten the rear tang screw, otherwise everything will be lopsided. Took me a few WTF's and watching this video to find out my trunnion screw was missing.
I had to put my WASR in a vice and yank the shit out of it. It came out though. Thankfully. Got lucky I didn't ruin anything. Not that it's ever going back on.
Thanks for the video, it looks like a pretty simple process. I plan to buy Kalashnikov USA's KP9 in the near future, and noticed it doesn't include a stock. I contacted Magpul and asked them if it would work, and they assured me that the stock is compatible with all AK platforms.
This video makes it look easy, I have a century arms RAS47. And putting this stock on was like wrestling a damn bear, I had to cut and file parts out of the stock and the excessive amount of force I had to put in just to make it fit.
_+Afro Sam_ It is completely legal to put a folding stock on an AK, the only way it wouldn't be legal is if your AK qualifies as a pistol. If your AK has a barrel less than 16 inches, and an overall length less than 26 inches, then it is illegal to put _any_ stock on it; thus the pistol brace was born. If your AK falls under this category, then you would need to fill out an ATF Form 1 and pay a $200.00 (USD) tax stamp. This would make it an SBR (NFA item), then you could legally put this folding stock on it. However, if your AK is a classified as a rifle, then you have no legal restraint from putting this stock on it. It is 922r compliant, and is 100% legal for you to put on your rifle.
Everyone who commented about the saftey being off has never disassembled an AK. Bolt wont come out guys.... Im pretty sure hes more knowledgeable then you
But what if you have a milled receiver? There doesn't appear to be a set internal size. I am actually looking to design my own adapter and buttstock system.
They do, but not many people know how to properly put them back on. Slide the front of the cover into the groove above the front trunnion, then with your thumb keep pressure on the rear side of the cover maintaining everything aligned, then use her free hand to smack down firmly (not too hard) on the top of the cover.
"you must begin by ensuring the firearm is unloaded and on safe" Kalashnikov: "haha, see Boris? You cant of disassemble the rifle unless rifle is ready to be of used".
Great info, thanks for sharing. You should have mentioned that the Zhukov requires the rear trunion for fixed stocks to be installed. If the rifle has a different rear trunion (like Bulgarian folders), the Zhukov cannot be installed
Word of warning: Magpul made the very poor decision of using a plastic hinge on these stocks, instead of doing the sensible thing of having a metal block on each side. This makes them extremely vulnerable to breaking with hard use. There have been lots of reports of them breaking.
Will this still function if Magpul doesnt send the brass washer for the 7/16 screw? I had ordered my AK from PSA and they didnt send the screws with it so I called Magpul and they sent me the screw kit needed but it doesnt have the brass washer. I dont want to take this to the range if the stock is gonna break or become damaged.
Can someone here verify the stock's rear trunnion tang insertion length ( into the back of the receiver, 1:25 - 1:30 )..let's say, as measured forward from the rear vertical face of the receiver? I have a Saiga that was modified to AK specs, but chose to retain the original trigger pins to cover the holes. The rear trigger pin hole on a Saiga starts about 1 3/16" forward of the rear receiver face and I hope it won't interfere with the stock insertion length. Thanks.
littleteethkeith yes it will work great! I just purchased a wasr10 2015 production and it looks and feels great no modding needed. It does increase length of pull over stock. I can send pics if needed God bless
I have this same stock. And it hurts my cheek when I fire it from the recoil. This is the only gun I have that does this the stock just doesn’t sit right against my cheek?
No it's in the way. Just installed mine and checked that very thing. You can change out the grip for an one like on a galil to grab that way. But stock set up. No
Only one small issue. In my opinion, replacing the wood furniture destroys the aesthetics. I bought mine to shoot but also to display. I really like the iconic design. It makes a statement. People immediately recognize it. Remove the wood and it loses it's identity. It looks gangster.
Im.not thrilled with that stock folding to the right, seems to me they should have went left, they covered the safety and cocking lever, not great. Poor design
I don't think so. The Bulgarian Milled has two large metal tabs that come out of the rear. You would need to at least cut the lower one off which would be permanent modification. You might be able to make it work but your could have a real issue if you ever try to sell it unless you find another person who wants this stock forever.
لم نشاهد تفكيك وتركيب البندقية بسبب الكتابة تغطي الصورة وليش ما تكو فيديو صافي من الكتابة . لم نشاهد تفكيك وتركيب البندقية بسبب الكتابة تغطي الصورة وليش ما تكو فيديو صافي من الكتابة .
Xaro Xhoan Daxos Glad to help out...I ordered one for my M92 "Krink" which I am SBR'ing...as soon as the BATFE gets off their collective asses and sends back my paper work...they were, however, very prompt about cashing m check...funny how that works...
If it did and you had a side rail AK scope mount. You would probably have to make the choice of not folding the stock , or removing the mount . That’s why it folds to the right .
That cast trunnion is going to start cracking after a few hundred rounds. Good luck, hope you don't get seriously injured when your RAS47 blows up in your hands. You should have bought a WASR-10, they aren't much more and they will actually function instead of falling apart after a year. Cast trunnions like in the RAS47 are not durable and will eventually break, it's a matter of when. WASR-10's have milled trunnions which is far better, although, the best you can get is forged.
lol "rock solid alternative".........yeaaaaaaaaaaaaaaaaaaah, the only thing that Magpul makes for the AK that isn't hot garbage is the pistol grips. Their stocks are known to be flimsy as a shit. I've had two and ditched both for REAL bulgarian polymer furniture
@@cvn7069 I’ve been trying to find adapters/stocks aswell, and I can’t figure out why this wouldn’t work. Single tang, everything looks like it lines perfectly, what doesn’t fit? Just curious because I’ve got a headache looking for answers
Mine just came in today. Thank you! I modified it to fit my Bulgarian. It won't win any beauty awards, but neither will the stock that came with it.
Mine was missing both the drop in wedge block washer and the tang well nut. So since I was installing it on a milled receiver I just used the receiver screw and put it up through the tang screw hole and used the wedge block nut. :)
“Slide the butt stock off the receiver.“
I think you mean: “Anchor it in the vice and yank on it until the point that you think your gun is going to break.“ Lol
There's typically a point you can pry it with a flathead screwdriver.
Thank you for the great installation video. Content like this keeps me buying from Brownell's. I'm new to AKs and I had purchased a PSAK-47 build kit from Palmetto State Armory. They have a good assembly video, but it was for the not-so-nice polymer stock, so there was nothing for the Zhukov, even though that was the stock in the upgraded PSAK-47 build kit. Brownell's to the rescue!
One of the best videos. Short simple to the point. Great job. Review more weapons and installs. Highly recommended to watch 👍
This Stock is best upgrade to the ak47 platform ive seen
One tip: If you didn't get the front screw (I didn't!) tighten the wedge block first, then tighten the rear tang screw, otherwise everything will be lopsided. Took me a few WTF's and watching this video to find out my trunnion screw was missing.
I beat the wood furniture off with a hammer. Like totally obliterated it. That palm slap he did will not work on a WASR 10.
I just did this and I agree 😅
I had to put my WASR in a vice and yank the shit out of it. It came out though. Thankfully. Got lucky I didn't ruin anything. Not that it's ever going back on.
its AK , comrade. Nothing works without beating it ;-)
Screwdriver to wedge it out from the trunion hole 🤦♂️🤦♂️
No rubber mallet work just fine and all it does it put a couple marks on it grab a towel and wipe it off easy and not messing nun up
Thanks for the video, it looks like a pretty simple process. I plan to buy Kalashnikov USA's KP9 in the near future, and noticed it doesn't include a stock. I contacted Magpul and asked them if it would work, and they assured me that the stock is compatible with all AK platforms.
Great video - worked perfectly on my WASR10. Nice product!
Was looking for someone with a wasr before I purchased. Thanks for the comment!
@@Equalenemy agreed
🤜🤛
This video makes it look easy, I have a century arms RAS47. And putting this stock on was like wrestling a damn bear, I had to cut and file parts out of the stock and the excessive amount of force I had to put in just to make it fit.
one of the biggest downsides of aftermarket AK parts vs AR, it seems every country in eastern Europe makes things at different sizes
Much easier than the included instructions
Time to change the old Woodstock on mine. Can't wait.
_+Afro Sam_
It is completely legal to put a folding stock on an AK, the only way it wouldn't be legal is if your AK qualifies as a pistol. If your AK has a barrel less than 16 inches, and an overall length less than 26 inches, then it is illegal to put _any_ stock on it; thus the pistol brace was born. If your AK falls under this category, then you would need to fill out an ATF Form 1 and pay a $200.00 (USD) tax stamp. This would make it an SBR (NFA item), then you could legally put this folding stock on it.
However, if your AK is a classified as a rifle, then you have no legal restraint from putting this stock on it. It is 922r compliant, and is 100% legal for you to put on your rifle.
Everyone who commented about the saftey being off has never disassembled an AK. Bolt wont come out guys.... Im pretty sure hes more knowledgeable then you
Thanks Brownells dad.
Strongest man alive
Can't wait for mines
May get one for my new AK.
funny how you mention Magpuls torque specs but you don't use a torque wrench
That's fine, good they included it. Probably took it right off after the video
But what if you have a milled receiver? There doesn't appear to be a set internal size. I am actually looking to design my own adapter and buttstock system.
AKs would be great if the dust covers would go back on easily
MadavTV the only thing I don’t like about the platform.
They do, but not many people know how to properly put them back on. Slide the front of the cover into the groove above the front trunnion, then with your thumb keep pressure on the rear side of the cover maintaining everything aligned, then use her free hand to smack down firmly (not too hard) on the top of the cover.
Maaaaannnnn....
They do
They do
Would it be recommend to add some lock tight after fitting everything?
No need. Everything is pretty solid. Magpul uses very in-spect screws and bolts.
"you must begin by ensuring the firearm is unloaded and on safe"
Kalashnikov: "haha, see Boris? You cant of disassemble the rifle unless rifle is ready to be of used".
Mine didn't come with the brass washer mentioned at 1:33. Is it missing or no longer included?
Mine was lacking this piece as well
Same here
Nyet! Rifle is fine!
Mine fits way too loose and when I tighten everything down the top part tilts back leaving a slight gap and it does not feel sturdy at all.
I have a Milled sam 7. Is this compatible?
Thanks for the great video! I have the MOE currently but I think I'll switch over.
Will this fit on Chinese Type 56-2?
Can you fire the rifle with the stock folded?
Yep
Great info, thanks for sharing. You should have mentioned that the Zhukov requires the rear trunion for fixed stocks to be installed. If the rifle has a different rear trunion (like Bulgarian folders), the Zhukov cannot be installed
what happens if your weld nut falls off... 1:47
mine did nothing has happened so far but i am curious to what significance this has ??
Word of warning: Magpul made the very poor decision of using a plastic hinge on these stocks, instead of doing the sensible thing of having a metal block on each side. This makes them extremely vulnerable to breaking with hard use. There have been lots of reports of them breaking.
The damn stock has more parts than the AK! Nice though
Wish I could have it fold the other side kinda stupid to fold toward the charging handle and safety, especially being right handed
Will this still function if Magpul doesnt send the brass washer for the 7/16 screw? I had ordered my AK from PSA and they didnt send the screws with it so I called Magpul and they sent me the screw kit needed but it doesnt have the brass washer. I dont want to take this to the range if the stock is gonna break or become damaged.
Anybody putting these on their Bren 2? Haven't found a single video of that yet
Does this fit on a Saiga unconverted? Looks like there’s an extra piece that sticks out on the trigger guard that this AK didn’t have.
Good vid except no one ever mentions that you need to buy QD kits to install.... That was an epic Magpul fail
just bought one and the button fold allow the stock to fold must be stuck or something because I cannot get it to open
"Clear gun and put it on safe"
Proceeds to leave the rifle on fire like a chad
Are any Browneells products available in the UK?
Can someone here verify the stock's rear trunnion tang insertion length ( into the back of the receiver, 1:25 - 1:30 )..let's say, as measured forward from the rear vertical face of the receiver? I have a Saiga that was modified to AK specs, but chose to retain the original trigger pins to cover the holes. The rear trigger pin hole on a Saiga starts about 1 3/16" forward of the rear receiver face and I hope it won't interfere with the stock insertion length. Thanks.
can it be installed on a double tang?
I have a question, the installation its the same even for Izhmash mk104 or it's different ??
Before i buy the stock and the handguard how can i be sure it is compatible with my ak can you please help me?
Mine didn’t come with a brass washer 🤷🏻♂️
nether did mine what did u end up doing
Can u add the website, for an adjustable stock.
Will this work on a 2015 production year WASR? If so will it increase the length of pull over a standard ak stock?
littleteethkeith yes it will work great! I just purchased a wasr10 2015 production and it looks and feels great no modding needed. It does increase length of pull over stock. I can send pics if needed God bless
_Killuminati_ 7.62 Thanks for the info. I think this is the route I'm going to take.
littleteethkeith no problem!! You won't regret it.
Hello, could the cylinder head of an ACR be adapted?
Mine doesnt fit with the wedge attached. I installed it without the wedge. Anyone else run into this?
WIll this fit a Norinco MAK90 straight cut receiver?
I have this same stock. And it hurts my cheek when I fire it from the recoil. This is the only gun I have that does this the stock just doesn’t sit right against my cheek?
All AKs do this.
I’m having issues extending it, it’s so stiff
That's what HE said...
Will it fit my shotgun? JTS M12AK -T1
Where cam I buy just the tightning wedge ??
Is it easy cocking it back, when the stock is folded to the right?
No it's in the way. Just installed mine and checked that very thing. You can change out the grip for an one like on a galil to grab that way. But stock set up. No
sir, can I buy the product
wher can i purchase this at my friend pleas help
What’s the difference between zhukov and Zhukov s ?
Side folding vs fixed
I have a zastava. Anything for me?
Any way to get this to work with an AMD-65?
Anyone know if I get a gf3 psak47 moekov with the folding stock can I install the non folding nutmeg wood furniture on that?
How much r they? R there different size cheek risers? And can u put a thick recoil pad for my lynx saiga clone?
1. They are priced at $99.95.
2. Yes, there are different sized cheek risers.
3. It would be difficult to fit your recoil pad on it.
Would this fit on a Riley Defense Tactical AK?
I'll report back when my order comes in, though i have a classic, but it should fit just fine
@@tetrahedrontri I bought a while back and I know it fits now.
How can I get a brass washer for this if it didn't come with it ???
Mine didn’t come with one either
mine didn't ether
Is there a pic rail adapter for that stock?
is it possible to install this stock on AKS74U ?
What kind of 1 point sling would you recommend for the stock?
Any you just need adapters for the qd swivels
A 2 point sling.
Hi does this stock fit a norinco type 56 ak47 Chinese
Can this stock be pinned open?
Is this folding stock CA legal for a featureless build?
I'm unsure if it is CA legal, but it is 922r compliant. I would assume since it's a folding stock that it isn't CA legal.
Fuck california
Will this work on a hellpup?
Is it easier to install these stocks on milled or stamped akm variants?
Stamped
Please is this suitable for Romanian akm
does zukov fit Polish WBP fox ak?
It is can use AMD65?
“Make sure gun is on safe” *doesn’t set it to safe*
Cant disassemble with safety on
Only one small issue. In my opinion, replacing the wood furniture destroys the aesthetics. I bought mine to shoot but also to display. I really like the iconic design. It makes a statement. People immediately recognize it. Remove the wood and it loses it's identity. It looks gangster.
I'm the opposite. I like the function of modern pieces on AKs and the look. They look so much better
Im.not thrilled with that stock folding to the right, seems to me they should have went left, they covered the safety and cocking lever, not great. Poor design
Besides saftey, gun is fully operational
Will this fit into a vska akm?
It's pronounced Zhukov, not Zukov. "Zh" sound like the second "g" in "garaGe".
0:25 on safe? I don't think so. That safety appears to be off
Can't field strip it with the safety lever up.
You can't remove the bolt and gas piston with the firearm on safe, thus there it would be illogical if he actually had it on safe.
does zukov fit Bulgarian milled reciever ak?
I don't think so. The Bulgarian Milled has two large metal tabs that come out of the rear. You would need to at least cut the lower one off which would be permanent modification. You might be able to make it work but your could have a real issue if you ever try to sell it unless you find another person who wants this stock forever.
Can this fit a jts m12ak t1 shotgun
Butt stroke a bad guy with that and good bye stock.
Will this fit on the jts ak12
Will that work on a milled Arsenal sam7r
This is not intended for milled receivers unfortunately.
لم نشاهد تفكيك وتركيب البندقية بسبب الكتابة تغطي الصورة وليش ما تكو فيديو صافي من الكتابة . لم نشاهد تفكيك وتركيب البندقية بسبب الكتابة تغطي الصورة وليش ما تكو فيديو صافي من الكتابة .
looks cute, but as the functionality, it is not supposed to fold to the right side of the gun where all actions are
Bud, optic rail mounts are on the left side of AK's.
Will this work on a Romania ak 47
mike Nase Yes, I just installed the set on my WASR ak from Romania. Fit like a charm.
Will this fit a Zastava M70 AK variant?
This particular one will not but I believe that Magpul has or will be releasing one for Yugo/Zastava models
+Ionracas85 Indeed Magpul comes through again...the Zhukov-S is now available for Yugo rifles...www.magpul.com/products/zhukov-s-stock-yugo
+Hangassan Thanks for the heads up!
Xaro Xhoan Daxos
Glad to help out...I ordered one for my M92 "Krink" which I am SBR'ing...as soon as the BATFE gets off their collective asses and sends back my paper work...they were, however, very prompt about cashing m check...funny how that works...
no
How many centimeters will the folded stock add to the overall lenght of the rifle?
I wish it folded to the left side
If it did and you had a side rail AK scope mount. You would probably have to make the choice of not folding the stock , or removing the mount . That’s why it folds to the right .
@@StevenSmith-pt8rz I like having my AK plain I put hella money into my AR and I ain’t put no money into my Ak and I like it the most
I though it was just me. Lol
It was the fight of my life. RAS47
That cast trunnion is going to start cracking after a few hundred rounds. Good luck, hope you don't get seriously injured when your RAS47 blows up in your hands. You should have bought a WASR-10, they aren't much more and they will actually function instead of falling apart after a year. Cast trunnions like in the RAS47 are not durable and will eventually break, it's a matter of when. WASR-10's have milled trunnions which is far better, although, the best you can get is forged.
lol "rock solid alternative".........yeaaaaaaaaaaaaaaaaaaah, the only thing that Magpul makes for the AK that isn't hot garbage is the pistol grips. Their stocks are known to be flimsy as a shit. I've had two and ditched both for REAL bulgarian polymer furniture
Where did you get your bulgarian furniture ?
THE WEAPON IS NOT ON SAFE! YOU AREN'T PRACTICING WHAT YOU PREACH!
Cannot field strip to change stock if it's on safe.
Is this stock qd sling ready at all or do you need some sort of adapter?
does this work with mak 90 with the straight cut?
Is it possible to put this on a unfolding stock ak?
Might be alittle late but. The folding mechanism is on the stock
Will this work on a JTS AK style shotgun?
No
@@cvn7069 I’ve been trying to find adapters/stocks aswell, and I can’t figure out why this wouldn’t work. Single tang, everything looks like it lines perfectly, what doesn’t fit? Just curious because I’ve got a headache looking for answers