"In this video, I use the LCP Simulator to demonstrate how to program the basic parameter into Danfoss LCP. Although it is not an actual Danfoss VFD and LCP, but the steps show here is the same when you physically do it on-site. The setup includes Initialisation, Motor Data input, Reference Limit, Ramp Up & Down and Digital Input configuration. Hopefully, this video is of helpful to viewers. If you wish to download the LCP simulator, please leave comment and I will show you the method to do so. thanks."
Hi @fakhrialmayahai6111, you can find this Danfoss @fakhrialmayahai6111 software from Danfoss website. You just need to google it and clink the link to download. The steps is pretty straightforward. Thanks
Hi @yahyaahmadi1818, I have tried to find this free Danfoss LCP simulator from internet. Unfortunately, I can't found any free download link at all. I remember I downloaded the free simulator from internet 1 year ago from Danfoss website but it seems that Danfoss may has removed the free simulator from their website.
First, you have to refer to your motor nameplate. Usually, motor nameplate will indicate information about Star and Delta wiring connection configuration depending on 3 phase incoming supply. For instance, motor nameplate wiring configuration showing 480V for Star connection and 220V for Delta connection. So, in this case, If your incoming power supply is 220V, then you have to manually configure your motor wiring connection into Delta connection.
Hi friend, I never encounter this alarm in my factory before, and we only have one Danfoss VFD in our plant. Our VFD only connect to one motor only. You may need to consult with Danfoss vendor for detail. Sorry because i have never come across this issue in the past.
Hi @S.KU.1305, Unfortunately, I have no way to test the idea you mentioned about the pump VFD pressure setpoint since our VFD is always running. I will try to test it on our pump VFD in future when the skid is shutdown for maintenance and will let you know the outcome.
"In this video, I use the LCP Simulator to demonstrate how to program the basic parameter into Danfoss LCP. Although it is not an actual Danfoss VFD and LCP, but the steps show here is the same when you physically do it on-site.
The setup includes Initialisation, Motor Data input, Reference Limit, Ramp Up & Down and Digital Input configuration. Hopefully, this video is of helpful to viewers. If you wish to download the LCP simulator, please leave comment and I will show you the method to do so. thanks."
Thanks for the video, very helpful for a newbie ✌️👍👌
Hi @aligilani92 , Thank you so much !
good detailed explanation brother.
Thank you so much.
Excellent good job
Can you Please providing info how to download LCP simulator. Thanks
Hi @fakhrialmayahai6111, you can find this Danfoss @fakhrialmayahai6111 software from Danfoss website. You just need to google it and clink the link to download. The steps is pretty straightforward. Thanks
Please provide me with the link to download the LCP simulator. Thanks!
Hi @yahyaahmadi1818, I have tried to find this free Danfoss LCP simulator from internet. Unfortunately, I can't found any free download link at all. I remember I downloaded the free simulator from internet 1 year ago from Danfoss website but it seems that Danfoss may has removed the free simulator from their website.
Hi friend , what the logiciel configuration use it in this video and thanks
Hi, may I know where is this logical configuration menu located in the HMI ? Thanks
how can i run a 3phase motor with 220V supply, motor connected in delta
First, you have to refer to your motor nameplate. Usually, motor nameplate will indicate information about Star and Delta wiring connection configuration depending on 3 phase incoming supply.
For instance, motor nameplate wiring configuration showing 480V for Star connection and 220V for Delta connection. So, in this case, If your incoming power supply is 220V, then you have to manually configure your motor wiring connection into Delta connection.
Hello !
Please I am connecting my vfd to drive two similar motors in parallel,it is giving me a W12 and W 13 warning , how can I solve it
Hi friend, I never encounter this alarm in my factory before, and we only have one Danfoss VFD in our plant. Our VFD only connect to one motor only. You may need to consult with Danfoss vendor for detail. Sorry because i have never come across this issue in the past.
How yo set pressure bar i want to know
Sorry! I don't understand your questions about setting pressure. Do you mean connecting pressure transmitter signal to the VFD Analog Input?
@@InstrumentationTechnician my buster pump VFD set point 4.5 pressure bar .I want to set 3.5 but how I can do that .give some idea
Hi @S.KU.1305, Unfortunately, I have no way to test the idea you mentioned about the pump VFD pressure setpoint since our VFD is always running. I will try to test it on our pump VFD in future when the skid is shutdown for maintenance and will let you know the outcome.