I love my twin Suzuki DF140! So quiet, very reliable, parts are really affordable, easy maintenance, very good fuel efficiency. My Yamaha was great too but more expensive to maintain but still very reliable. My friend's Mercury died out in the ocean several times and had to be towed. Lots of sensor problems, difficult to maintain, expensive parts, and in and out of the shop. Zukes are the best in my opinion!
Here is one other cool thing about these engines. They are so quiet, as idle, that people will get in, and try to turn the key, not realizing it is already running. But Suzuki thought of that, they installed a block of some sort (don't know the mechanics of it) so you can't do any damage, you can "grind it" if you make that mistake. That is called superior engineering. What I don't know-is, are they are reliable in the long run as a Honda--they might be, I don't know But I sure like them, have seen them in the ocean running side by side with me and my Yamaha.
Cant speak personally as to reliability over time as I don't do enough hours, but I can say that a lot of the commercial and government boats use Suzuki (as well as Yamaha).
@@tigesinaus More than a stereotype, but Japan's manufacturing has become legendary, for good reasons. On the other hand, even Japan has had to use China, like everyone else, and that makes one pause for sure. Let's hope you Suzuki does well, I sure like what I see.
With correct maintenance, you can expect to get thousands of hours out of a Suzuki outboard. The only exception to this are the first and second generations of the DF350. One thing to note is that Suzuki outboards love to be run hard. They are known to build up carbon deposits due to unburnt fuel. To prevent this, make sure you run that engine hard at high RPM for a decent period of time.
Awesome! I myself have a DF150 on my 18ft boat. The thing pulls so quickly it's scary! Tops out at a mere 65kmh though... It hits the rev limiter when I'm at 3/4 throttle. My prop is a stainless steel 3x15x17L. Tomorrow I'll try a 3x15x23L prop that I borrowed, I think that'll be more suited for my lightweight boat. The motor itself is very quiet and runs very smoothly. I love it :-)
What size transom you got there haggis and whats the dimensions of your boat i got a 20x6 flat bottom with a 20 transom i want to mount this motor to my boat please respond id like to know
@@edwardabrahamiii3742 I don't know the exact dimensions of my transom. All I know is that it's a 5.50 meter boat. It's officially rated for 135hp max and I think that's also considering a 2 stroke so I've already put a bit too much engine on my transom :-) Result is that my boat is now a bit more sternheavy but it's not too bad. I don't recommend doing the same as I did though and just stick with your max. allowed weight. That being said, I do believe the DF175 and DF150 are about the same weight so maybe you could go for the 175 instead. Not entirely sure though. I think manufacturers should also state a max engine weight and not just max HP output as some engines weigh less than others while putting out more HP's. It can be a bit confusing at times. But I'm happy with my DF150. 3x15.5x23L was a bit too much prop for my boat by the way, I've ordered a 3x15.5x20L and I think that's going to be the sweet spot for me. I did get higher top end with the 23 but my rpms dropped to low 5000's and holeshot was a bit weak.
@@user-ke5gq3ck3v в зависимости от модели, конкретной запчасти и наличия, но в основном было всегда, суза процента на 2-3 дороже, на б/у рынке то же самое в основном
Absolutely, need to lift the hull off the water and get the prop up a bit. Gains revs and top speed. May be different, if your boat is setup for offshore use, it will be mounted lower, so you will likely gain trim angle but may not get the motor up much.
Работаю на двух работах по 12-14 часов,у меня комбайн 26 мил.стоит.Не плачу,только в с/х хрен заработаешь,разве что горб..И с пенсией прокатили на 1,5 года..Живу и радуюсь!
The suzuki 150 is the heaviest 150 of all the other 150s other then the honda 150 but i want the suzuki it also holds so much oil 8.5 quarts thats alot 2 gallons ans half a quart
Mate, hard to say. There are lots of 18 footers pushing 60 with 150s. You may be better off with something with a slimmer gearbox like a merc or a yamaha SHO.
@@edwardabrahamiii3742 Yeah I know, I meant: you would need a small racing hull to get 80 mph with a 150hp so it's more likely that @tigesinaus is talking about km/h. 80mph is something around 133km/h which is pretty fast in a boat, especially with a 150hp. I'm sorry if I misunderstood what you're saying. I'm from the Netherlands and English is therefore not my first language.
@@edwardabrahamiii3742 Yeah that converts to 15 and a bit feet, close to 16. It was propped pretty aggressively though, just loose a few numbers in pitch and it will push your 20 foot no worries.
Best outboard motor I have ever owned…hands down. Fuel efficiency is amazing and it purrs like a kitten.
When I get a pontoon suszuki is what I am going to choose. Had Mercury's. I believe suzuki is a much better motor all around.
I love my twin Suzuki DF140! So quiet, very reliable, parts are really affordable, easy maintenance, very good fuel efficiency. My Yamaha was great too but more expensive to maintain but still very reliable. My friend's Mercury died out in the ocean several times and had to be towed. Lots of sensor problems, difficult to maintain, expensive parts, and in and out of the shop. Zukes are the best in my opinion!
I’m looking at getting a new Suzuki and was wondering why you went with 140hp rather than 150hp.
Love the video 😍
Gracias, simplemente hermoso ese sonido y potencia que imprime...
I love my Suzuki 175 and have been very satisfied with it.
I you see the amazing Performance of my Twin Suzuki 350, you will change your mind about your out-board 😎
@@DeepBlueOcean22 you don’t even own one of them because you don’t even know how to spell outboard lmao
Çok sağ ol video çok yararlı buldu teşekkür ederim
I can't imagine if there were two of these beasts.
the boat will drift in to the water
Awesome outboard got to get one.👍
Круто👍
Instablaster...
Хорошо тянет!
Look very impressive.
Here is one other cool thing about these engines. They are so quiet, as idle, that people will get in, and try to turn the key, not realizing it is already running. But Suzuki thought of that, they installed a block of some sort (don't know the mechanics of it) so you can't do any damage, you can "grind it" if you make that mistake. That is called superior engineering. What I don't know-is, are they are reliable in the long run as a Honda--they might be, I don't know But I sure like them, have seen them in the ocean running side by side with me and my Yamaha.
Cant speak personally as to reliability over time as I don't do enough hours, but I can say that a lot of the commercial and government boats use Suzuki (as well as Yamaha).
@@tigesinaus More than a stereotype, but Japan's manufacturing has become legendary, for good reasons. On the other hand, even Japan has had to use China, like everyone else, and that makes one pause for sure. Let's hope you Suzuki does well, I sure like what I see.
With correct maintenance, you can expect to get thousands of hours out of a Suzuki outboard. The only exception to this are the first and second generations of the DF350. One thing to note is that Suzuki outboards love to be run hard. They are known to build up carbon deposits due to unburnt fuel. To prevent this, make sure you run that engine hard at high RPM for a decent period of time.
You should hear a 150 Tohatsu,,,have to listen carefully
@SCDeerAddict how do Tohatsu outboards compare to Suzuki and Yamaha in terms of reliability, I heard they are the successor to Nissan outboards
Suzuki рулят😉
هالمتريال سريع تاع نشان🇩🇿🇪🇸❤
2 سوايع راني في الميريا و ندي معايا دارنا
Amazing
Awesome holeshot!
That's not a fast holeshot.
Гарна бричка!
Awesome! I myself have a DF150 on my 18ft boat. The thing pulls so quickly it's scary! Tops out at a mere 65kmh though... It hits the rev limiter when I'm at 3/4 throttle. My prop is a stainless steel 3x15x17L. Tomorrow I'll try a 3x15x23L prop that I borrowed, I think that'll be more suited for my lightweight boat. The motor itself is very quiet and runs very smoothly. I love it :-)
I'm trying to figure out what prop to buy for the Ranger 375V (17'10") I bought last week... It has a 1990 Evinrude XP150 2 stroke on it...
@@williamriley2528 24 raker
What size transom you got there haggis and whats the dimensions of your boat i got a 20x6 flat bottom with a 20 transom i want to mount this motor to my boat please respond id like to know
I was told the max motor i can mount is a 150 but the suzuki 150 is the heaviest 150 but i want to mount it to my boat
@@edwardabrahamiii3742 I don't know the exact dimensions of my transom. All I know is that it's a 5.50 meter boat. It's officially rated for 135hp max and I think that's also considering a 2 stroke so I've already put a bit too much engine on my transom :-) Result is that my boat is now a bit more sternheavy but it's not too bad. I don't recommend doing the same as I did though and just stick with your max. allowed weight. That being said, I do believe the DF175 and DF150 are about the same weight so maybe you could go for the 175 instead. Not entirely sure though. I think manufacturers should also state a max engine weight and not just max HP output as some engines weigh less than others while putting out more HP's. It can be a bit confusing at times. But I'm happy with my DF150. 3x15.5x23L was a bit too much prop for my boat by the way, I've ordered a 3x15.5x20L and I think that's going to be the sweet spot for me. I did get higher top end with the 23 but my rpms dropped to low 5000's and holeshot was a bit weak.
اريد مثل هذا بوصل اسبانيا خلال ساعه 😂🔥
Вот это понимаю ход.
Mint
Terbaik Suzuki.
Бодро👆идёт😁👍
Nice boat
Läuft Sauber👍
Ахуительно!!!
قوة الضاربة
القارب السريع يا صديقي عبز يسيل إن شاء الله ربي يسهل الهجرة
That Suzuki sounds great
Mantapppp
10 liter/min-gut!
Muito Satisfatório!
That's one fast 150
Linda maquina megusto
Motor de alto rendimiento
Wowwwwsuper suzuki
Awesome
Nice motor
👍 perfect
Nice!
Zuki is one of those motors that I wouldn't go out just to buy but wouldn't be scared of buying a boat that had one. It's the right color anyway.
They’re good motors
@@joquilledeal2337 Are they though? Tohatsu all day
Чем или как регулируется угол наклона в зависимости от оборотов? Не гидроцилиндр, это понятно и так, а как он занимает нужное положение?
Anwsome
Красавчик!) все таки Сузуки менее шумная чем Ямаха! Работает мягко!😀👍
Запчасти дороже! Везде есть нюансы. По звуку honda нравится
@@knownmoto1123
На Ямаху да , запчасти дороже чем на Сузуки .
@@user-ke5gq3ck3v в зависимости от модели, конкретной запчасти и наличия, но в основном было всегда, суза процента на 2-3 дороже, на б/у рынке то же самое в основном
I have exactly the same engine on a Merry Fisher 695 - interested in your use of engine tilt. Does it make an appreciable difference to top speed?
Absolutely, need to lift the hull off the water and get the prop up a bit. Gains revs and top speed.
May be different, if your boat is setup for offshore use, it will be mounted lower, so you will likely gain trim angle but may not get the motor up much.
You don't know how to trim your engine? Play with it...listen...watch roma and you'll find more enjoyment from your investment!
Yes less friction faster you go always plane up
Seastar Steearing Tiller Good~
wow speed good
Oo yeah
Beste
На докатку потянет
Cool
not bad
👍
Nice!...
mantap mesinnya tinggal gaas ,salam kenal dari channel saya "kakbemo"
Is the trim automatic ??
How much does the boat weigh ??
What boat is it ?? Length etc. ??
Not automatic trim.
Hull approx 600 / fuel 100 / gear 100 (kg)
Tabs Wildfisher 4.8m
Смотрю на этот двигатель и думаю, а когда такое чудо смогут сделать в России? И сам себе отвечаю, НИКОГДА!!!!
Ветерок-150
Top
Could it bi fixed in diving scooter?
What is the price?
Smooth
good suzuki
Отличная докатка вместо вёсел на ПВХ лодку!(да,мужики,нам только мечтать мечтать о таких можно..)
Или работай, чтоб не мечтать
Только плачешь я вижу, не больше!
Работаю на двух работах по 12-14 часов,у меня комбайн 26 мил.стоит.Не плачу,только в с/х хрен заработаешь,разве что горб..И с пенсией прокатили на 1,5 года..Живу и радуюсь!
Пушка 👉👌
16ft boat with 150hp and 23 pitch probably not loaded not surprising. I had 14 ft with df60a hp by my self 69.2 kmh.
Sweet!
Buen videoo 👍👍
what is the speed ?
Does it auto trim it sefl? Or you do it manually?
Manual trim.
Silent. Powerful. Fuel efficient
И какая скорость интересно?
Itu enjing sujuki kah?kinapa basikal ku laju lagi dari itu bot kawang?
The suzuki 150 is the heaviest 150 of all the other 150s other then the honda 150 but i want the suzuki it also holds so much oil 8.5 quarts thats alot 2 gallons ans half a quart
Is that what 8.5 quarts translates to thanks I was stumped on that
What was your speed at 5K? Looks fast.
5k was around 70 topped out at low-mid 80s (km)
What prop you running here there bud??
Suzuki 3x16x23
175ку надо
Super moteur pour les haragas
Good motor 👍👍🙏
I know a lot of them with 600, or 100 hours,with engine down
Pourquoi ils relèvent le moteur??
تحيا الحراڨة 💪
Not a 4 stroke fan i wish they still made injected 2 strokes im old school i want the smoke
Mercury 2.5 🤙
Would this push an 18ft 9 inch 99 Ranger in the 60's?
Mate, hard to say. There are lots of 18 footers pushing 60 with 150s. You may be better off with something with a slimmer gearbox like a merc or a yamaha SHO.
@@tigesinaus go with a mercury proxs 150 and you'll be there %100
@Rylan Adams I have a 97 692 with a Suzuki 175 and get about 52 wot
How wide is your boat?? And trasom height v bottom semi v flat bottom??
👍🇲🇷
اللهم ارزقنا يا رب
Corrosion King!
My 2-stoke mercury 15hp rews 6750rpm ;)
and produces 15hp....
How much money for this machine?
😃😃😃🤩🤩🤩🤩✌
Evinrude 150 даст ему прикурить? Тот что 2 такта инжектор в 6
каким образом?
Suzuki: very good.
Quien me dice por qué se corta y se ahoga en marcha a tope y en medio puño no se corta??cual es el fallo ??
Where is? How much price?
Spain I'm coming 😁😁
Sweet motor love the 150 size what kinda speed you gettin here...sorry if you dint already say above
low-mid 80s.
@@tigesinaus kilometers an hr or miles an hr??
@@edwardabrahamiii3742 Has to be kmh. mph can't be possible with a 150 on a regular hull?
@@MrMijnaccount1 thats all we use here in U.S.A MPH
@@edwardabrahamiii3742 Yeah I know, I meant: you would need a small racing hull to get 80 mph with a 150hp so it's more likely that @tigesinaus is talking about km/h. 80mph is something around 133km/h which is pretty fast in a boat, especially with a 150hp.
I'm sorry if I misunderstood what you're saying. I'm from the Netherlands and English is therefore not my first language.
What size boat you running there tig? Ima bout to get me my first motor
Mate it’s a 4.8 plate alloy boat.
@@tigesinaus thats a freakin 15ft boat according to google i got a 20foot boat 6 feet wide ima mount that 150 on my boat
@@edwardabrahamiii3742 Yeah that converts to 15 and a bit feet, close to 16. It was propped pretty aggressively though, just loose a few numbers in pitch and it will push your 20 foot no worries.
@@tigesinaus thats a small bpat there bud what size transom you got how high are the walls?
@@tigesinaus what you get for top speed out of you 15 16 ft boat??
Бля,не дай бог на такой скорости топляк поймать🤔
Примерно 70км/ч
laju betul berapa sese
Suzuki
2t?
اعطونا نحرقو بيه رانا كرهنا لالجيري
Ставил такой на Казанку , даже на глисс не вытянул