How to clean the Taurus G3C/G2C/PT111 G2
ฝัง
- เผยแพร่เมื่อ 23 ส.ค. 2024
- Thanks for watching my video on how to clean the Taurus G3C.
Email me: thecalibercorner@gmail.com
Follow me at...
Guntube.org: travisp11
Gunstreamer: travisp11
UGEtube: travisp11
Facebook: travisp11
Twitter: @travisp11onyt
Instagram: travisp11onyt
Support me on Patreon...www.patreon.com/travisp11
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including TH-cam) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
Disclaimer: These videos are strictly for educational and entertainment purposes only. Imitation or the use of anything demonstrated in my videos is done AT YOUR OWN RISK. All work on firearms should be carried out by a licensed individual and all state and federal rules apply to such. We (including TH-cam) will not be held liable for any injury to yourself or damage to your firearms resulting from attempting anything shown in any our videos. I do not endorse any specific product and this video is not an attempt to sell you a good or service. I am not a gun shop and DO NOT sell or deal in Firearms. Such a practice is heavily regulated and subject to applicable laws. I DO NOT sell parts, magazines, or firearms. These videos are free to watch and if anyone attempts to charge for this video notify us immediately. By viewing or flagging this video you are acknowledging the above.
I have a Taurus G2 in .40 so I especially appreciated this video to compare different wear points and oil locations. I use Balistol on my first pass on cleaning and I use Gun Butter for the oiling. It has a pink tint to it so you can easily see where and how much oil your dropping in. Thanks for a clear and concise video.
Balistol is another solid choice! Thanks for watching!
Diesel brass brush. Then diy gun oil.
I use Shooter Combo you get 1 spray bottle large one and a blue oil bottle as well i spray the entire gun out even in the striker everywhere, and i use the brush to get all that carbon out and than i rinse it all off with soap and water than finally spray it all off with water and than wipe it down good sit it on my on my in closed porch on a table and let the sun dry it it for about 1 hour and than come back and put all my lube in and then pit it back together..
yes i use soap and water to get the solvent out you don't want solvent residue at all in the gun because than once you place your oil in if there is some solvent residue there that will brake down the oil kind of defeating the entire oil system..
Soap and water is not going to damage your gun so long as you wipe it dry and leave it to dry well it will be fine because after that your going to place the oil which will prevent any any damage that long exposure water could do..
Now i'm not saying this is how you should clean your gun, but this is how i do it and when i was in the military, we cleaned our M16 with solvent and than soap and water and set to dry and than plenty of oil, M16's love to have a lot of Oil..
Another thing you can use if you don't want to buy solvent, you could use 409 Cleaning product on it which i have done when i ran out of Cleaning solvent..
the 409 cleaning solution gets rid of both the oil and carbon very well..
I spray it out and let it sit than scrub it out and wipe it clean and than rinse it off with? you guess it Soap and water and than wipe it down set it to dry and than oil it up and your done..
Thank you for the information!
Another great video brother! I like to use Hoppies#9 on my G2C, mostly because of the smell, but it works great as well. I lube it up with glass cutting oil. I also polished up the rails to a 3000 grit. It smooths out the function and it doesn't tear up the swabs as much.
Good suggestions! Thanks for watching!
Great video and instructions. Keep up the good work. Thank you for the instructions. I use REM oil but am always open to try something new. Another great video from Travis.
Thank you for watching!
Another great cleaning video Travis
Thanks for watching!
Good video man.
Thanks for watching!
Can you do a video on the G2 with the bore snake, it’s the cleaner I have and idk how to use it on the G2 and I’ve been searching for videos but can’t find one
All that you need to do is put a few drops of oil on the rope of the bore snake in front of the bristles and pull the snake through from the back of the barrel to the front a few times.
Would hoppes 9 be OK for a cleaner as far as the slide channels and breech face go? Thanks
Yup!
👍👍
Thanks for watching!