That's the scooter that started it for me. My buddy had a blue white prebug and was cool enough to let me take it out whenever I wanted. I have a few zumas still today at 49 years old. Awesome build
Sheesh with the big shout out! thanks for being a Grat customer and a Friend! and you heard it right! we are giving away a prebug at 40k. The sooner you subscribe sooner we give it away! the thumbnail filming was classic!
I just got scooter a few weeks ago, it is four stroke gy6 they are trying to get rid of 2 strokes here in Canada. It is called a Scooterre Solista I got because it looks like Vespa. Anyway I wanted to find some cool stuff to do to it and landed here at Mopboyz awesome channel! We need a mopboyz chapter out here! 🤘
Yo! Get a new variator cover. The engine block is going to snap with it so cut out. Get one that’s already cut out for you but still has all the support that it needs!
Looks good brotha, just did the Yasuni R on my Roughhouse along with a malossi bbk, the pipe sounds incredible in the minnirelli motors and that pipe unleashes wvery bit of potential out of the bbk
Just got my 70cc aerox started today with no problem dint tune it at all i went from a 12mm carb to a 21mm has a giannelli pipe malossi clutch and she runs like a beast you inspired me allot thanks 🙏🏼
You need a advance flywheel key on the crank for advancing the ignition and work on you cluch it needs to engage a 1500rpm higher. But anyway nice setup. At the moment im building a corsa setup same you have. But with porten crankcasings and cylinder
Now see the video. Nice setup, but polini corsa ports are miss matched. Needa a aluminum spacer on the bottom to lift the cylinder sobtge ports can alihn. And then shave tge top of the cylinder to get the 0.8mm squish or so. Then you port the exhaust port.
Always making those 🔥 builds bro, i have to cut out my cvt cover as well. Got a bigger clutch set and its rubbing on my kicker case too, no plasma cutter though going to use a dremel lol
Polini 21mm carb, 40 pilot 110 main? The 6 gram weights, been researching different setups, Thanks for sharing its a good starting point for 70cc kit and pipe and roller weights to start at.
Hell yeah brother that's money love getting to see all the new toys the gauge placement was dead on man I have a question the temperature gauge is it backlit does it light up just wondering cuz that will be a next purchase????
im not too sure about the malossi crank. For the ciao (another moped in italy) they say that the malossi crank isnt good (everything else is, my "zuma" has a full malossi engine and it runs nice, even tho still 50cc)
Do you still have electric start? If so, does the battery have enough juice to crank it? And if so, what battery are you using? I just built my prebug, and with such a tiny battery vs my bugeye, it seems it just can't crank hard enough to start unless it's already fully warmed up! Yuasa battery and all (though it's conventional lead acid, not SLA/AGM)
If anyones interested my fiance is wanting to sell her 1984 honda aero80 !!! Has 1200 miles on it. Just had carb rebuilt and all fresh fluids. Only missing plastics around seat. Runs and rides beautifully
yo my dude, I know you bia's but, how come you have so many Honda Elites and so little Zuma/ Yamaha JOGS , do Elite engines have more power or something.... am new thanks.
Yo you like the Honda/Minarelli - buy an Airsal T6 for the Piaggio LC motor. The Airsal T6 is a great blank canvas (cheap and bridge), port the heck out of it, crank, pipe, big carb 17+BHP easy. I feel you are a little underwealm with the Piaggio LC, it needs work, that's all 👍
That's the scooter that started it for me. My buddy had a blue white prebug and was cool enough to let me take it out whenever I wanted. I have a few zumas still today at 49 years old. Awesome build
I was bitten by the prebug as well. I've the fever pretty bad right now and my pockets are on fire.
Sheesh with the big shout out! thanks for being a Grat customer and a Friend! and you heard it right! we are giving away a prebug at 40k. The sooner you subscribe sooner we give it away! the thumbnail filming was classic!
Heyyooo! Happy Friday, dudes!
yessir!!!
yo bro i love it build now zuma/booster grz from belguim bro mopeboyz !!!
I just got scooter a few weeks ago, it is four stroke gy6 they are trying to get rid of 2 strokes here in Canada. It is called a Scooterre Solista I got because it looks like Vespa. Anyway I wanted to find some cool stuff to do to it and landed here at Mopboyz awesome channel! We need a mopboyz chapter out here! 🤘
dope build! it would be fun to see you tune a typical swedish moped such as a Aerox, slider, viva city or a typhoon
thanks man!
Yo! Get a new variator cover. The engine block is going to snap with it so cut out. Get one that’s already cut out for you but still has all the support that it needs!
Looks good brotha, just did the Yasuni R on my Roughhouse along with a malossi bbk, the pipe sounds incredible in the minnirelli motors and that pipe unleashes wvery bit of potential out of the bbk
Has it blown up yet I want to put a yasuni R on my roughhouse but was wondering how the reliability is?
The music always lit in the background
Just got my 70cc aerox started today with no problem dint tune it at all i went from a 12mm carb to a 21mm has a giannelli pipe malossi clutch and she runs like a beast you inspired me allot thanks 🙏🏼
Yasuni is just Best
love it
I'm glad to see you tune up the zuma good video 😁🤪💯
thanks dude!
im more early than usual! happy friday!!
NOTIGANG!! 👏🏾Another dope build
yeahhhhh!
28mm on the Dio, that's wild! My 80cc Dio has a 21mm OKO on it. It's a bit cooler here so I'm currently running 45 pilot, 88 main.
THumbnail got me i am missin the desert weather i miss vegas!!!!
thumbnails actually me in a skirt....
@@MOPBOYZ thats alot of tattoo removal
Your work is so great
Hes fast on his builds
Nice work bro
Love the build
love your vids broo!
You should open the rear end and put a support bearing in the gearbox cause the kickercase supports it a lil bit
the kicker case doesnt have the support part on these older ones
You need a advance flywheel key on the crank for advancing the ignition and work on you cluch it needs to engage a 1500rpm higher. But anyway nice setup. At the moment im building a corsa setup same you have. But with porten crankcasings and cylinder
Great build bro.
We need a wheelie video😂
Build a scooter/sidecar rig and take your dog for a cruise..
Now see the video. Nice setup, but polini corsa ports are miss matched. Needa a aluminum spacer on the bottom to lift the cylinder sobtge ports can alihn. And then shave tge top of the cylinder to get the 0.8mm squish or so. Then you port the exhaust port.
Always making those 🔥 builds bro, i have to cut out my cvt cover as well. Got a bigger clutch set and its rubbing on my kicker case too, no plasma cutter though going to use a dremel lol
How about we set you up with a set of aerox wheels for your zuma. A little update to the wheels.
I can save you a lot more than sss does.
Sick bro 🤙 stoked to see this thing on the road
same!
Yeeee lil peep in the background.
12:50 your T_shirt its looks soo nice from behind 🔥💞
You need to put the yellow clutch springs instead of the green.
Look at your grip looks like it may be close to the plastic making it stick ive seen that happen before 🙌🏼🙌🏼
nah its not, its internal throttle housing
@@MOPBOYZ damn was hoping it was simple so either cable or carb slide
no lol, its the throttle housing, inside where the cable sits theres a piece of the plastic that was bent out a tiny bit and rubbed.
@@MOPBOYZ damn easy fix like the build coming along right sounds great 🛵💨💯
yea glad it was easy! thanks
So this thing is the yamaha BW'S?
Polini 21mm carb, 40 pilot 110 main? The 6 gram weights, been researching different setups, Thanks for sharing its a good starting point for 70cc kit and pipe and roller weights to start at.
Hell yeah brother that's money love getting to see all the new toys the gauge placement was dead on man I have a question the temperature gauge is it backlit does it light up just wondering cuz that will be a next purchase????
sadly these are some cheap gauges , no backlit they are kinda hard to see at night
I hear juice wrld he’s awesome
Is this combination fast?is a corsa cilinder a good choise for fast zero to 60 sprints?
i have a 89 jog the bike and engen looks the same but cant find cluch and vereator parts for it
Bad ass!!!
very hows the bugeye buddy!
The bugeye is a beast! It definitely turns heads
looks good brother . man you got so much going on how do you remember what is what lol ?
im not too sure about the malossi crank. For the ciao (another moped in italy) they say that the malossi crank isnt good (everything else is, my "zuma" has a full malossi engine and it runs nice, even tho still 50cc)
Do you still have electric start? If so, does the battery have enough juice to crank it? And if so, what battery are you using? I just built my prebug, and with such a tiny battery vs my bugeye, it seems it just can't crank hard enough to start unless it's already fully warmed up! Yuasa battery and all (though it's conventional lead acid, not SLA/AGM)
what do you think you’ll get as far as MPG with this setup? gona run pre mix and convert the oil tank as an extra fuel tank?
9:49 Iraq🇮🇶🔥🥲
Yasuni carrera 16 is better for 70cc or carrera 21
my drove the first time today=)
is it legal to tune your scooter like this in the US ?
Bro I just moved to Vegas and I have a stock bws100 I wanna eventually bbk pipe carb . Could you help me out ?
Would have been easier if u just taped the new cable to the old and just pull it thru wldnt it?
Maybe you should buy a Racing Driven Pulley !
what yasuni exhaust was it
c10?
c16?
I've been trying to get a prebug for 2yrs and can't find anything for a reasonable price. WTH did you find 4 of them?
Very noice
So confused can someone please help me where can I find aftermarket wheels for mopeds. Been after a set for my jog for the longest time :)
When can I get a mopboyz beanie and some stickers they would look fire on my moped 🔥🔥🔥🔥🔥
new merch coming soon dude! i’ll announce when next week!!
Trevor Pritchett let’s gooo
Put wd 40 in the throttle and cable and dont put the grip too close to the block
what’s the difference between this and a bw’s again?
zuma is what they’re sold as in america from yamaha
What y'all think of a genuine roughhouse
Thats whats I run, a 21 Roughhouse Sport with a Malossi BBk and Yasuni R pipe, thing is incredible.
I only got 400 miles on mine
If anyones interested my fiance is wanting to sell her 1984 honda aero80 !!! Has 1200 miles on it. Just had carb rebuilt and all fresh fluids. Only missing plastics around seat. Runs and rides beautifully
Leave the handle bars stock , I changed mine to pro tapers I regret it
why do u regret it
Make the prebug ride weird like mad stiff
Fiytb🗣
yo my dude, I know you bia's but, how come you have so many Honda Elites and so little Zuma/ Yamaha JOGS , do Elite engines have more power or something.... am new thanks.
theyre all hard to come by, just get the ones i can when i see them. I like them all, its just how its been working out.
Nothing beats the Hondas
No air shrouds?
mentioned it a few times in the vid, there off to check for leaks on first start up..
@@MOPBOYZ thats what a pressure test is for
damn i thought pressure testers for checking blinker fluid
@@MOPBOYZ dont mean to offend. Just curious why youd leave the shrouds off when you already pressure tested is all. Nice build ride safe 🤌
@@AngusCPU i don’t have a pressure tester, so i did a lil diy test using starter fluid for meantime
What year model is the Zuma.
1989
@@MOPBOYZ Nice. Definitely a hard one to find. ✌️
Will you change the rims of the prebug to a wider set? Would love to see that conversion happen 👌🏼👌🏼
you should buy piaggio nrg dope scooter
They don’t have those in America. The closest thing to that is a typhoon.
since when they call this prebug?? i thought it was BWS 50cc
not called bws in america
Braaaaa how u been getting that good shit I leave 10 mins away from u and I dont even get that shit
If you can find a scooter like piaggio zip, gilera runner 125cc or 180cc, piaggio SKR 125cc in America, buy it! It’s it’s defenitely wourth it
Was the Gilera 125 or 180 ever available in the US? I thiught the Zip and Gilera were grey market only.
I wanna know hoe u get that hood shit smh am in vegas and 10 mins away
😍
👍👍💪
👍👌💪😁des pr
Tak bez chłodzenia to troche nie bardzo🙁
Yo you like the Honda/Minarelli - buy an Airsal T6 for the Piaggio LC motor. The Airsal T6 is a great blank canvas (cheap and bridge), port the heck out of it, crank, pipe, big carb 17+BHP easy.
I feel you are a little underwealm with the Piaggio LC, it needs work, that's all 👍
Trevor please buy a honda ruckus you wont regret it
rode them a few times, just not a fan of them myself
Wack...
First g
Hey bro give me the mop boys sticker
Love from India
already picked winner!
354
I ain't here for no ass.. Zuma's are beautiful and too expensive here unfortunately.