Good idea on the motor swap u would have most freshie build up there and can do ur rebuild later on make some more content cant wait on new merch drop Mopboyz going to be mobbin!!!!
What mopeds have you found to be most responsive to tuning (70ccbore kits etc) Had speed fights when I was younger but I’m 33 now been out of the scooter game for a long time. Looking at getting another here in the UK and fancy a piaggio zip 50. Loving the videos keep up the good work.
Best 50cc for tuning would be anything with a Piaggio HiPer2 engine (which includes the Zip). Anything with a Mineralli horizontal derivative comes in a close second, and anything with a Honda AF16 or AF16 engine comes in third. Minarelli verticals respond well to tuning as well but they don’t have quite the potential of the other three. And Honda AF05Es fall in behind them. Not really sure where the Morini engine falls in here, as they’re exceedingly rare here in the states. These are also just my opinions from what I’ve studied and observed about scooters with these engines.
Hey man i have a 98 bwsr im wondering is there sopose to be a washer behind the ramp plate on the crank because i put a polini variatior on and the ramp plate started making noise after 40 hours
always super creative and imaginative with figuring stuff out, all the little touches make a big difference. you posting merch to the UK, was looking to get the sliders :)
hey i have a question. i have a yamaha booster70cc airsal with a 16mm carb and i dosnt like do rev for some reason. the carb is tunded well, i have 4g rollers and when i take 3 rollers out it revs up nicly what might be the problem???? it has malossi cluch with a white soft spring and a 1500 cluch springs
poor choice on that doppler crank bro.. i had one that snapped the conrod in half killing my engine cases as well, and saw other people with the same problem as well.
Anyone got a 70 cc with a 21mm carburetor what main jet and idol jet are you running? Trying to get mine working. Right? And need a rough ballpark I’ve tried from 98 to 110. Main jet. And 32 to 38 idle jet and can’t get it to run, right
all depends on the air density and elevation where you live but i usually end up with 100 main 40 pilot and the needle clip all the way to the top on all my 21mm carb set up bikes here
One Day you will have a tuned Aerox ☺️ that bike is a must for you!
letsss gooo yall uploaded🔥
Love the 2stroke but When you makin some more 4stoke content
Why tho🤣
4stroke gay
When you go 2 stroke only use for a 4stroke is to daily ride to work etc
if you watch his older videos he had some chinese 4 strokes
@@BloodBath707wants to see some 2 stroke Vespa stuff.
Great info...on all u do to your rides I'm ready for Seattle!! Great job trev. Old man mop
You need a Reveno on that sucker ! :-) good stuff
You should throw a big bore ultimate kit together with everything you recommend for us to buy
you should try MXS 70cc on some of your future builds
Good idea on the motor swap u would have most freshie build up there and can do ur rebuild later on make some more content cant wait on new merch drop Mopboyz going to be mobbin!!!!
Always love a mop boyz post gotta get my hands on the blue windbreaker to rep in my town👍👍
got to my dude 🔥
What mopeds have you found to be most responsive to tuning (70ccbore kits etc) Had speed fights when I was younger but I’m 33 now been out of the scooter game for a long time. Looking at getting another here in the UK and fancy a piaggio zip 50. Loving the videos keep up the good work.
Best 50cc for tuning would be anything with a Piaggio HiPer2 engine (which includes the Zip). Anything with a Mineralli horizontal derivative comes in a close second, and anything with a Honda AF16 or AF16 engine comes in third.
Minarelli verticals respond well to tuning as well but they don’t have quite the potential of the other three. And Honda AF05Es fall in behind them. Not really sure where the Morini engine falls in here, as they’re exceedingly rare here in the states.
These are also just my opinions from what I’ve studied and observed about scooters with these engines.
maybe someday there will be a video how you rebuid a 150cc scooter??
SALUDOS A Gastón que debe estar mirando este video! Del club del Fliper Flaper 🐬
Stage 6 the og red one!! Stock bars are hard
You could also just use a nutsert (nut insert) for the M10 in the frame. It would save the hassle maybe
So where can these actual scooters be bought & maintained?
I'm interested!!
As always, loving the builds 🔥🔥
Hey man i have a 98 bwsr im wondering is there sopose to be a washer behind the ramp plate on the crank because i put a polini variatior on and the ramp plate started making noise after 40 hours
my job is only a short 20 min drive, wondering if i should get one of these!
The Mopboyz phone case is fire my dude!
thanks for your support homie 🫶🏻
always super creative and imaginative with figuring stuff out, all the little touches make a big difference. you posting merch to the UK, was looking to get the sliders :)
yessir ship worldwide , thanks my man !
@@MOPBOYZ ayeee thanks mate
@@MOPBOYZ brings malossi torque drive better acceleration for Wheelies or oem better ?
Hey man you ever have issues with the air cooled in the crazy Vegas heat ?
Love the videos keep up the work
🔥🔥you shoud get a yamaha aerox 70 or aprilia sr 49 they are fire
where did you get that seat cover?
hey i have a question.
i have a yamaha booster70cc airsal with a 16mm carb
and i dosnt like do rev for some reason.
the carb is tunded well, i have 4g rollers and when i take 3 rollers out it revs up nicly what might be the problem????
it has malossi cluch with a white soft spring and a 1500 cluch springs
please do a hyper build! watercooled and more than 70cc, maybe tpr 86?
watch my rcone derbi build series. also have a few 120cc water cooled build vids too
@@MOPBOYZ i sure will do that!
love the videos. BUT we need more of the puch maxi. :P
sooon just waiting on parts overseas
poor choice on that doppler crank bro.. i had one that snapped the conrod in half killing my engine cases as well, and saw other people with the same problem as well.
Str8 stem + voca racing bars
Change your stator to a Malossi on or a italkit it vil do so much
Nice looking work
What's your parts upgrade list? I have a 70cc bb kit but cant tune it to save my life. I have a genuine roughhouse
watch the build series on my blue zuma i explain every part + tune . same setup as this one
Hey are you guys in las vegas
💚Mop boy can u do a video about mbk nitro it's crazy bike n I kno u kno that Love Love Love mop boy 💙
we don’t have them in this country my guy!
What do you got a cub ez 90 i got one to dude
dude keep posting videos please
where do you get your prebugs, i want one so badd
lucky enough just to find them when they randomly pop up
See ya soon
should still get a piaggio ciao ngl
Whats the intro song 🔥
Anyone got a 70 cc with a 21mm carburetor what main jet and idol jet are you running? Trying to get mine working. Right? And need a rough ballpark I’ve tried from 98 to 110. Main jet. And 32 to 38 idle jet and can’t get it to run, right
all depends on the air density and elevation where you live but i usually end up with 100 main 40 pilot and the needle clip all the way to the top on all my 21mm carb set up bikes here
What is that headlight?
stock
Hello mopboyz🫡 i need help please for my prebug, im looking a stock parts if u have please let me know i can buy bro,im from canada BC, please bro🙏🙏🙏
Puch when?
waiting on parts from overseas so whenever they decide to appear 🤦🏼♂️
@@MOPBOYZ same I'm waiting on parts for my super 9 build
@@mitchankrom3771you also got a super 9?
Doppler cranks are pretty bad dude😢 i broke so much of them
i hear so much good about them too
i always run doppler cranks on my high end builds. they are cheaper then the malossi rhq and they run just as good if not better
bro you must build a aerox
i wish but they don’t have them in america
Yoooooooo
194th viewer
Athena sport 70cc + yasuni r + 19-21 delorto/polini cp one love
Max speed 95-98
Max speed whelie 85
mk2 racing better