Thank YOU. I spent an hour trying not to lose my patience....... then I went to TH-cam...... the rest is history! After replacing the old one, the Replace Toner message kept re-appearing, I thought just maybe...... maybe I put the original toner cartridge back in by mistake! I tried and tried both for nearly 90 minutes before going to TH-cam for help....... when I heard the original cartridge’s gear was different, only then did I realize how stupid I was. I do want to add: I had a brassy 2”x2” memorycard on both so I did NOT remove the old one as this video suggests. Works fine
Thank you so much, this was a huge help. The printer wasn't recogninzing that I'd just inserted a new cartridge. Now I'm tempted to reset the old one, put it back and see much more printing I can get out of it!
Thank you so much!!! great hack... worked great for me. Needed to print something important and my new toner will not arrive for many days. you rock!!!!
My question is how to turn the reset gear to the position in 0:50? I tried turning from the inside but it only has a few positions and I turned to one and didn't work.
what a pain. Glad I dodged a bullet and got a printer that uses the TN630/TN660 instead. There is no reason for that chip to exist other than to give you a headache trying to use cheaper third party cartridges. At least this video makes it easier for those that own a printer that uses the TN730/TN760 toner cartridge.
Hi, thank You very much for the great video! But the first shown "right position" of the reset gear at video time 0:50 is different to its position at video time after 0:55 (after reinstalling the side panel). So, the shown position at video time after 0:55 must be wrong, right?
Thanks a lot we have a tn760 and it was working after the chip in it but forcing continue as still said replace but was very annoying, the gear did the trick. I knew there had to be some other thing it needed due to the oem new one just working with same chip.
I followed the first part of the video to change the position of the re-set gear. However, I was confused about whether or not to remove the chip. So I left it alone. I don't have another chip to put into this toner cartridge. All I want to do is to use this old toner cartridge a bit longer. However, when I put the cartridge back into the printer with the re-set gear in the new position, the printer display still said "no toner" and the menu buttons would not let me do anything. What do I need to do?
I have seen Brother laser printer toner reset procedures - one to reset the counter by button combination on the control panel - that is clear to me, but this gear resetting i cant understand why is it present on the same printer model/toner as the gear reset method (if one method is present on one model then its clear. but when both methods are present on a model then its strange). Whats the difference between them: if i reset the toner by button combination or by turning the gear? thank you
@@viandant5 now i am confused more :D lets say a specific printer supports both control panel reset and toner gear reset. How is the toner gear reset only by itself going to help if inside the firmware the counter says to replace the toner? Is that counter also connected to the gear?
hey i followed the instructions to reset the gear, but when I insert the toner and close the door, i get the error "No Toner". my reset gear is in the same position as yours. also, I don't understand what replacing the chip is for. Do I have to do that step too?
@@viandant5 Not sure I understand that step. I have a NEW cartridge, but it gave me the "low toner" error very early into its usage. So I followed your instructions to reset the gear, but did not replace the chip.
Sorry, I don't follow. What is the purpose of the chip? Are you putting a chip from the old (default) cartridge into the new cartridge? why do we do that? If I threw away my old cartridge, you are telling me I should buy a new cartridge and take the chip from that and put it into my current cartridge?
@@viandant5 Can you do it from the panel like the HL-3170CDW? In your opinion what should I get Brother or Xerox printer, which is the best quality and reliability wise?
i followed your steps once before and it worked perfectly, however my printer updated recently and now when i put the cartridge back in the printer just spins the reset gear back into the wrong position. I'm hoping I'm just doing something wrong but I'm worried brother did an update to force these to fail now. could there be a simple explanation for why my reset gear spins itself to the bad position when i push the cartridge back in? (edit. I figured it out i was like 2 gear teeth off the correct position, the spring needs to be under slight tension.)
My cartridge is a starter cartridge. A starter cartridge doesn't have the side gear in order to reset its position. What to do? Also, do I need to do anything to the chip already there? Watching the video and reading the comments below made me more confused. SHould I just leave the chip as it is?
Thank YOU. I spent an hour trying not to lose my patience....... then I went to TH-cam...... the rest is history! After replacing the old one, the Replace Toner message kept re-appearing, I thought just maybe...... maybe I put the original toner cartridge back in by mistake! I tried and tried both for nearly 90 minutes before going to TH-cam for help....... when I heard the original cartridge’s gear was different, only then did I realize how stupid I was. I do want to add: I had a brassy 2”x2” memorycard on both so I did NOT remove the old one as this video suggests. Works fine
thank you. got some china made toner and the printer kept asking for new toner until you showed us the way. Thanks
Sir, you saved the day for us! Thank you for making this video!
Probably you have a starter cartridge
Best explanation on the whole internet. Awesome
Thank you so much, this was a huge help. The printer wasn't recogninzing that I'd just inserted a new cartridge. Now I'm tempted to reset the old one, put it back and see much more printing I can get out of it!
Thanks So much..you saved time and my energy today. have a blessed day.
Solve the message "drum end soon" while printing is very neat clean
In 2531 DW
Thanks for explaining the dial, fixed my problem!
Thank you so much!!! great hack... worked great for me. Needed to print something important and my new toner will not arrive for many days. you rock!!!!
Thank you; very grateful that you have shared this!
YOU are a champion, God bless you keep it up
Works like a charm! Thank you so much!!
will try this when I get the toner powder. thankyou for this video. mine is HL-L2395DW
My question is how to turn the reset gear to the position in 0:50? I tried turning from the inside but it only has a few positions and I turned to one and didn't work.
At 0:42 there is the inside of the gear
what a pain. Glad I dodged a bullet and got a printer that uses the TN630/TN660 instead. There is no reason for that chip to exist other than to give you a headache trying to use cheaper third party cartridges.
At least this video makes it easier for those that own a printer that uses the TN730/TN760 toner cartridge.
You saved my ass sir. thank you very much
Hi, thank You very much for the great video! But the first shown "right position" of the reset gear at video time 0:50 is different to its position at video time after 0:55 (after reinstalling the side panel). So, the shown position at video time after 0:55 must be wrong, right?
It's the same, a cm change nothing. However better the position at 0:50
Thanks a lot we have a tn760 and it was working after the chip in it but forcing continue as still said replace but was very annoying, the gear did the trick. I knew there had to be some other thing it needed due to the oem new one just working with same chip.
bloody good fella, thxs :3
Thank you thank you thank you thank you thank you!!!!!!!
I followed the first part of the video to change the position of the re-set gear. However, I was confused about whether or not to remove the chip. So I left it alone. I don't have another chip to put into this toner cartridge. All I want to do is to use this old toner cartridge a bit longer. However, when I put the cartridge back into the printer with the re-set gear in the new position, the printer display still said "no toner" and the menu buttons would not let me do anything. What do I need to do?
You don't need to change chip. In case of not recognized cartridge try this:
th-cam.com/video/dDaB7ppILgE/w-d-xo.html
thank you so much!!!
Thank you, VERY MUCH!!!!
I have seen Brother laser printer toner reset procedures - one to reset the counter by button combination on the control panel - that is clear to me, but this gear resetting i cant understand why is it present on the same printer model/toner as the gear reset method (if one method is present on one model then its clear. but when both methods are present on a model then its strange). Whats the difference between them: if i reset the toner by button combination or by turning the gear? thank you
Not all the printer models using this cartridge has the control panel with the buttons
@@viandant5 i know but i have seen this technique to be used on toner which goes into printer which has the control panel
@@zsoltibitter8761 Yes, the reset gear works in every printer.
@@viandant5 now i am confused more :D lets say a specific printer supports both control panel reset and toner gear reset. How is the toner gear reset only by itself going to help if inside the firmware the counter says to replace the toner? Is that counter also connected to the gear?
@@zsoltibitter8761 Yes, the counter could be reset in both ways
does it matter what the toner powder is?
You must use a brother toner powder
@@viandant5 can you link where you bought it or a sample one
@@ЖивкоТенев aliexpress will work well
Buddy, the reset gear for TN B021 ? Is it the same?
No, it's a different cartridge
hey i followed the instructions to reset the gear, but when I insert the toner and close the door, i get the error "No Toner". my reset gear is in the same position as yours. also, I don't understand what replacing the chip is for. Do I have to do that step too?
Did you insert the chip in the new cartridge?
@@viandant5 No I did not. I no longer have the old cartridge anyway. Is there anything I can do at this point?
@@viandant5 Not sure I understand that step. I have a NEW cartridge, but it gave me the "low toner" error very early into its usage. So I followed your instructions to reset the gear, but did not replace the chip.
The cartridge needs the chip. I think you have to buy a cartridge with the chip
Sorry, I don't follow. What is the purpose of the chip? Are you putting a chip from the old (default) cartridge into the new cartridge? why do we do that?
If I threw away my old cartridge, you are telling me I should buy a new cartridge and take the chip from that and put it into my current cartridge?
I need to replace my 3170 and am looking at the newer Brother HL-L3270CDW printer. Can you reset the toner on this printer as well?
yes. it's possible to reset them
@@viandant5 Can you do it from the panel like the HL-3170CDW? In your opinion what should I get Brother or Xerox printer, which is the best quality and reliability wise?
@@stevelaminack1516 yes, in this channel there is a video
@@viandant5 I looked and didn't see it, can you point me to it? Thanks
@@stevelaminack1516 th-cam.com/video/F4n-8KiRg9I/w-d-xo.html
where can i buy the chip
Try Delacamp or uninet imaging
i followed your steps once before and it worked perfectly, however my printer updated recently and now when i put the cartridge back in the printer just spins the reset gear back into the wrong position. I'm hoping I'm just doing something wrong but I'm worried brother did an update to force these to fail now. could there be a simple explanation for why my reset gear spins itself to the bad position when i push the cartridge back in? (edit. I figured it out i was like 2 gear teeth off the correct position, the spring needs to be under slight tension.)
I think the reset gear will reset the counter in any way
What happens if you put the non-reset gear cover from starter cartridge on the new cartridge? Then no need to ever reset the gear?
It happen that there is no reset of the counter. The lever is what make the reset, not the cover
cool, worked for me
My cartridge is a starter cartridge. A starter cartridge doesn't have the side gear in order to reset its position. What to do? Also, do I need to do anything to the chip already there? Watching the video and reading the comments below made me more confused. SHould I just leave the chip as it is?
yes, you should let the chip as it is
It works!! Thank you!!
I did the reset but it's still showing up as low toner. Did I do something wrong?
I suggest you to try again, may be the reset gear did not activate the lever in the printer
That‘s helpful!
SWEET
How a video to refill this cartridge?
th-cam.com/video/PZ-QyNGDls8/w-d-xo.html
How about tn2480 cartridge? I tried everything but it didn't work. Brother dcp 2550dw
this method will allow you to continue to work. if you want the toner levels you have to change the chip
Solve the error message "replace toner" in printer 2531 & toner 2465 after refilling.
may the the reset gear is not in the right position
You saved me
Tn760 have chips not gears I thought. My tn760 and 730 cartridges have chips
they have gear and chip. the chip is a copy counter, the gear tell the machine that a new cartridge has been installed
My reset gear wasn’t like the one displayed on this video.
There are different types of gear but the procedure is the same
How to reset DR b021 toner
There is no reset gear in the TN2410 or TN2420 :-( so im stuffed (HL-L2350DW)
you have a starter cartridge, the one that are in the printer shen you buy it. you have to buy a new cartridge or to buy the gears
This does not exist on my cartridge!
Probably it's a starter cartridge. No gear
Pls reply fast