Monster Race Engine Roars to Life in Tiny Bush Plane 🤩 Part 1 | Scrappy #32
ฝัง
- เผยแพร่เมื่อ 15 มิ.ย. 2024
- Check out some of my Favorite Aviation Companies:
Best Tugs
www.besttugs.com/
Worlds Greatest Zip Tie!
www.griplockties.us/
Pratt & Whitney
www.pwc.ca/en
Turbine Service
www.covingtonaircraft.com/
BRS Parachute
brsaerospace.com/
Aircraft Engines
www.lycoming.com/
Carbon Cub Kits
cubcrafters.com/
Aircraft Lighting
aeroleds.com/
Garmin Aviation Products
garmin.com/Aviation
Avionics Systems
www.avionikits.com
Aircraft Fabric
www.stewartsystems.aero/
Aircraft Lighting
flywat.com/
Alaska Bushwheels
www.airframesalaska.com/
King Shocks
www.kingshocks.com/
EarthX Batteries
earthxbatteries.com/ - บันเทิง
![[MPD직캠] 베이비몬스터 치키타 직캠 4K 'LIKE THAT' (BABYMONSTER CHIQUITA FanCam) | @MCOUNTDOWN_2024.6.13](http://i.ytimg.com/vi/h99J4vWm7Ew/mqdefault.jpg)
*The guy who built both Draco and Turbulance* : "this is one is probably one of my most extreme....". Well that's saying something.
Draco’s my fav
it's interesting to think 100 years from now most of the things Mike Petty touches will end up in an air and space museum. Legend!
Hey Bryan! I just got done watching one of your vids, HILARIOUS as usual!
Be careful what you wish for..
Can't wait to take my kids to a museum one day and say "When I was a kid I watched Mike Patey build that on this thing called TH-cam..."
@@ChandraSlyFoxPatey I would love to see this crossover! The Pateys fly the Grumman.
@@ChandraSlyFoxPatey 😄 thank you.
I always wondered if there was a hot rod community for airplanes
You definitely found it.....
@@jonathanmcnabb9153 no joke 😂
@@mclaynebalzly1739 also look into Sports Class, at the Reno Air Races
I bet that thing would fly even without the wings at full throttle...
Piece of cake to take off, but good luck with the landing...
@@patheddles4004 pull the parachute to land...duh...
I have thought the same
I bet it would fly with the wings at idle throttle.
I´ll bet Scrappy can jump up with the front gear up, even without the engine running,
i´m pretty sure mike build kinda a lowrider/jumping car setup with these KingShocks,
using the pressure of the Oxygen bottle.. Why?
Stol Drags.. start with the shocks at no pressure, and a low height, avoiding drag from the Wings to get to Takeoff Speed even fastere,
and as he hits the JUMP Scrappy JUMP button,
the Shocks and the massive travel they have will catapult Scrappys front up to get an massive Angle of attack..
and let the 780cui engine deal with the drag.. which it will be easy capable of pulling kinda 90° verical up
This thing is a SToL Top Fuel Dragster while Draco was(and will be again) kinda an STOL SUV with lots of Power
1:00 am in Germany: "I should go to sleep"
Scrappy #32: "Hello there"
....
"No sleep it is"
Same here 😂🇦🇹
Same from Norway...
same here man, NL
Same here. 🇬🇧 👍
As a fellow European, I wish you all a good night.
Mike, honesty, this is the most sporty prettiest looking bush plane I’ve ever seen.
I wanted to see the plane run. I couldn’t be more disappointed.
good one, thats funny!
yeah, no kidding. all we got was a few seconds..
Clickbait
WOW, I expected to see some wings get strapped on for a flight... 🙄
@@jrfoleyjr Wow really wanted to see it run not just hear it.
I am a certified A&P mechanic USAF F-15 crew chief and this guy rocks with his engineering !
“It’s a little non standard” - understatement of the year. 😁👍
I wonder if there's a single stock standard, unmodified Cub part in the entire build. I can't think of one.
@@JimOHalloran
The windscreen....no when he took out the support bars he changed that too....guess me either.... LoL 😜
Yeah first Bush plane that can do a prop hang
As a fellow designer, engineer, and machinist.....I love the VO on the intro "Machine it, draft it......"
I tend to start in the shop as well - fiddling with ideas and concepts to see what is possible. Then I draft the part or assembly afterward armed with practical knowledge.
Really love how you approach these challenges Mike! Really inspiring.
I, also, am a Mechanical Engineer (MET)! And I do design work (sometimes I just build it) and I know my way around a Machine Shop! My first thought when I saw the Intro was "This thing has an INSANE power/weight ratio!"
Watching a man a few years older than me having the excitement of a ten year old that gets a new bike makes me happy. Awesome work
I’m not even a big aviation guy but this build series is amazing. Keep it up mike
"ITS ALIVE" is fitting. It sounds like a monster. Awesome!
Could not agree more buddy!
Such a tease. Badass on so many levels. Love the casual mention of your previous firm and the EV truck. My friends are always blown away by my engineering and fabrication work but then I tell them about you... puts things into perspective for them. There’s always a next level.
Not fair you fire Scrappy up, we watch as you Leap Forward, tell us that Scrappy's is all warmed up, then cut to Scrappy sitting idle with loud engine sounds in the background No Doubt not showing us that Scrappy was indeed dragging the pick up along the ramp.
Cindy Thorn That was my thought. Scrappy was dragging the pickup across the tarmac with smoke coming off the tires!
As a short teaser this was well enough at the end of the dae after a long wait 🤠 Also looking forward hearing the beautiful roar of this flat-8 780ci banger 😀😀😀
He didnt want us to see it flying without wings
Yeah, a little disappointed after all the build up it cuts away at the good part
@@erikmcclain3703 hes gotta get us back for the next video... not that he needs any help doing that! lol
"why do we always start our engines for the first time at night?" -Mike
"That's when you work" -Mikes friend
"good point" -Mike
god what a awesome answer and response, had top re--watch it as it gave me a good laugh.
Keep up the good work and back to work, scrappy need her wings ^^
The prop is as insane as the engine. Can probably take off like a helicopter.
do weird tricks like they do with them superlight high powered RC planes
Draco darn near did!
Looks like an airboat prop
@@austinzimmerman2934 Lol, It IS an airboat prop!
@@daverohn383 probably would have if he tried... cant blame him for using proper instincts to save himself tho.
In a world of chaos and Mike Patey shines bright like a genius. My man!
@Matt Diamond are you taking your medication and seeing your therapist?
Scrappy when the engine fires: "I don't need wings! Let's go!"
Wasn't sure that strap was gonna hold it...
Pull the chute and give it the full beans.
Probably doesn’t need wings! Just hang it off that ridiculous prop... oh wait, no, where do you put the fuel? I guess I’ll need wings after all
@@tanguyadriaenssen9755 The baffled center tank is probably good for at least a few gallons... but with all the cubes on that engine it's probably thirsty!
Just needs something to counter the crazy torque that engine makes
Why is it pimping the most docile aircraft form since the biplane, into a demonic beast of performance is so pleasing. I want it.
Only thing: You hear the music longer than the engine.
:(
I am always impressed by your attention to detail with your engineering Mike. There is no “cutting corners” or “close enough is good enough” approach with your aircraft builds. The most recent example where you took the time to manufacture the throttle and mixture control bell crank levers with ball bearings instead of plain bushings is just another example of going that extra yard and is fantastic.
Thanks Jeff 🤠
AWESOME!!!! Mike's BACK. THE man with the GREATEST 8 year old kid on Christmas morning grin and level of excitement.
Yo!! Mike thanks for taking time to explain what your doing and why, i have learned so much (already knew a bit) about aeronautical engineering from your patient explanations.
Top tier TH-cam, exactly what the platform SHOULD be about.
Thanks m8
That was one of the best explanations I have seen for having tuned exhaust. Thanks Mike!
This is only equal length NOT tuned length. Tuning is FAR more involved and if you want to read up on it have a look at the Race Engine Spec Form on BUNS Stainless website and some of their articles on the subject.
@@timphoto83ec
Indeed. A very long winded explanation at that. Guy is acting like he invented the concept.
At startup I thought Scrappy was going to completely come apart lol. So much power and thrust from the prop.. Wow!!! Can't wait to see the titanium-carbon fiber reinforced wings lol. Amazing work, Mike. You are the Nikola Tesla of Airplanes. The Wright Brothers are smiling from ear to ear watching this.
Love your videos!! Watching your videos have distracted me from pretty serious times
“It’s really not practical”, he says. And doesn’t care one bit. 🤤
Oh it's practical.
I guarantee it!
Every flyer in my world is reconfiguring the mechanix of their craft😃
@Matt Diamond 😐
@Matt Diamond who is we?!? If you would take those blinders off and realize that "we" are all ignorant in some areas, which we can slowly change, but very smart in others, then you would understand that Mike Patey is just as smart as he has always been, and a genius in what he does in fabricating. Don't like the pilot, jump, "with or without a parachute", now! Have a day! :o)
This is not a “practicality project”. It IS a “dream testing”’ project. I am in awe.
Thank you fore letting us be part in this build. Best regards from Norway 😊
Why didn't we get to see it running? You big tease! Sounds Wicked.
Scrappy is going to be an absolute monster! I can’t wait to see it fly!
It is a Frankenplane
You’re going to have too.
@@Sillyturner #thebigsad
With this amount of power i would rather call it a heli 😀😀😀😀
Howard Hughes just leaned over & told Charles Lindbergh "WOW! That guy really knows how to build a plane".
Mike sticks two fingers up to all the so called 'experts' out there by doing it his way.
This plane is superb, its well thought out and done to a very high standard. Nothing wrong with having this much power, it's actually safer than a low powered plane. It can get you out of
trouble in the air and will have much shorter take off. Great work.
Greetings from Russia.. ❤️
I just KNOW the wing will be in design stage until the last rivet is driven home. We won't know until Scappy is finished (if it ever truly is) if it will have slats, slots, Fowlers, spoilers, stall fences, speed brakes, rock-scorching lights, or all of the above. Can't wait to watch the build!
With headphones on it sounded.........good! Dang!
That look on your face Mike when that thing leaped forward as soon as it lit off. That thing is a monster!
It's nothing short of amazing. Watching someone put their dream together one part at a time. One can almost feel the nervousness and anticipation he feels as he created his dream to share with the world. I know this man's feelings, but on a much smaller scale having created the motorcycle of my dreams. Thank you so much for sharing your dream with the world....
I understood all of 3% of this video. But the plane looks amazing and you built it yourself! Smh amazing doesn’t even touch the talent you have
Mike has more hours tied up in dreaming, engineering and building aircraft...
Then all of the major aircraft manufacturers combined!!!!
and a very fat wallet too, I would do the same....
Loading some ammo and watching the Scrappy build. Life's good.
Hey, I do the same thing!
You got me thinking... A 50 cal gun pod under each wing... would pay to see that!!
My god! The avionics in that plane! 😍😍😍😍
To my mind, in this moment, this is the best aircraft that has ever been built. All hail Mike Patey. Cheers again mate.
Its great but that's a Shout that not correct I could name some excellent Aircraft that would blow Your mind, Don't get Me wrong it's a great build but No1 no chance.
I’ve never been so excited about something I’ll never get to own. Amazing work 🇺🇸
YEE HAW!!! Nice job mike and your editor is amazing as well!!
That throttle and mixture linkage is a thing of beauty! Honestly it is a bit of a shame that so much gorgeous engineering will ultimately be covered-up. Keep up the good work Mike, your positivity and enthusiasm are infectious and are definitely keeping my head above water this morning!
I have no words that can convey the emotions you are creating with this build. You are above and beyond most of us. Thank you for taking the time needed to show us, FOR FREE, the insane amount of work it takes to build a flyable work of art. Two thumbs up and Know you have inspired everyone that's been exposed to the privilege of your videos. Carry on with your bad ass self!!
Since you introduce this engine I've had a question. With the power to weight ratio, is there some reason that you still need wings? KJZI
Torque control! like the tail rotor on a helicopter! LOL
Scrappy #33 no need for wings, lets fly it.
Wings schmings........ let er rip!
He's got wings on the landing gear...
Without wings there would be nowhere to mount nav lights :D
G’day Mike Chandra & Co ;-) Wahoo... Happy Birthday Scrappy!
“Build It They Will Come”
“Everything Is Energy & Frequency”
“You’re Gonna Need A Bigger Hanger”. Lol..
With many source blessings with truth love light laughter joy fun play happiness creativity adventures and may peace be with you all!
Victoria Australia xoxo
Just discovered your channel. As a hot rodder, an off-roader and an F-15 Eagle maintainer of 34 years, I totally dig what you have created. As an Eagle Keeper, the world's ultimate hot rod, I can totally appreciate putting a big engine into a small package. Good stuff! I just subscribed.
@Hydin Biden Well, yeah, the Blackbird was faster and flew higher... but the Eagle set numerous time to altitude records and I'm pretty sure is more maneuverable. Probably easier to maintain as well. Never worked the Blackbird but I've heard the horror stories.
@Hydin Biden Right on. Once a Marine, always a Marine! Once it's in ya, ain't no getting rid of it.
Being a hot rod builder..... 780 cubic inches. Makes me smile like a cat with a sack full of mice. Can’t wait to see the first flight
Don't need to sit there and make engine noises anymore :-) -Daven
oh hey i know you lol
Time to drown out the imagination with the brutality of reality!
Didnt expect to see TIFO here lol
Oi, what are you doing over here?!?!
no more spit on the dashboard!!
Fantastic! Congratulations, we are with you all the way ! Thank you for including us.
OMG Mike you’re killing me.....!!!! You gotta finish this thing and get it up in the air!! I can’t wait any longer to see this thing fly!!!
BEAUTIFUL EXPLANATION OF THE EXHAUST SHAPE FOR THE BACK BLAST TIMING AT THE COLLECTOR!
Just lovely to se this be alive :)
Just skip the silly shortclips in between. Back to work !
I can’t remember ever being this excited to see a project come together. I’m still convinced this is a hybrid airplane or need be helicopter! Let’s get this awesome project in the air and out to be seen.
I enjoy watching your creativity. After a fall and four seizures I do not always think properly and enjoy watching and listening to those who can.
Congratulations on the birth of the newest member of the family! 🤗
I got goosebumps when it fired... I'm so excited for you, and thrilled that you've brought us along on this epic project.
The monster is alive 💪
Us glider pilots can't help to watch some GA now and then can we 😆
@@Haralddv Scrappy can be ya' tug!
That glider guy
“It’s really not practical” 🤣yes please🙌🏼
I'm giddy with excitement to see this thing in the air!!
sounds freakin awesome on my 200 watt system! nice audio!
Man, I wanted to watch another half hour of that initial run-up...
IKR...!!!
Great, great, great!! It's been amazing to follow the Scrappy build from day 1. Mike, you make us feel like we've been with you all the way! Love your enthusiasm, energy & PASSION FOR AVIATION. Thanks so much for continuing to share Scrappy with us all, it means a hell of a lot :)
Love the attention to the detail. Every "thousandth" is performance and reliability.
I just love the way you think and work 😀 that motor is sweet music .
Mike patey you’re one of my favorite TH-camrs I always make sure I tap on your videos first
With that engine, scrappy won't need a runway 😁
His rework of the flight control systems tells a little about his real knowledge!!! Genius!
"Oh, back when I was 15 building race motors".
This man 👍👍
I had to sit through that whole vid to see just a few seconds of goodness at the end and now have to wait for another vid to see more?!? Sign me up...
I like this guy. Kind of a showoff but in a humble, happy, enthusiastic, educational manner. Love it. I have no knowledge of airplanes but definitely subscribing to the channel. And the plane is awesome as hell. What a great engineer.
And there I was thinking I would never love a bush plane more than Draco...man this is sweet! Great job Mike.
And I thought a 427 cobra was the ultimate. This is insane for an airplane.
Never heard of the Weineck AC Cobra 780? Check it out! ;)
So that's a flat 8 in there then? How would that compare/function if it was shoved in a car?
In 1960,
stefan w my dad told be, after WWII he say a guy put a Spitfire Rolls-Royce engine in a car. As it drove down the highway at 80 miles an hour he could give it gas and smoke the tires
@@garrygballard8914 www.classicdriver.com/en/article/cars/john-dodd-and-merlin-engined-monstrosity-infuriated-rolls-royce
I’ve been going through a divorce the last few months. Thank you so much for being an inspiration and always being so positive
same here man, mikes videos are a great help to ease the pain! better days ahead to you
Same here. Thank you Mike!
Mine has just come to an end after 7 years of unnecessary torment. Hang in there lads, it will get better.
Just when I think I'm getting this guy, he starts talking in a way that leaves me fully aware of my own shortcomings.
Epic. How are there not 1M subscribers? This is where innovation is at.
THAT'S TOTALLY INSANE. But I love it. Best explanation on tuned headers.
That ending is such a tease! The way it lurched forward after the first crank and the just the sound! Your killing me! I can't wait to see more! (did I use enough "!" in this comment?)
You sir are making the world a better place
It’s coming together and it’s looking beautiful
YES YES YES!!!! I put this video on the home theater and cranked up the volume. I could see the wife's mouth moving but couldn't hear her yells. Thanks Mike!!!!
😂😂😂
Once you are married long enough you don't even need actual noise to pull that off.
@@--_DJ_-- Dude, it’s been 21 years. She has a special gift. Mike helped me cure this. GO SCRAPPY!!
#GETTOWORK
Jean and I shave a Great Deal of Respect for you Brother and we Both TY for the Excellent Videos and your Humor and Humanity ( Jean is Terminally ill ) you do make her Smile 😊
🙏🏼 That put a smile on my face. Give our best to your dear Jean. ♥️
Congratulations it’s been fun to watch the creation of Scrappy.
Maybe not quite a Turner, but you are still an artist. Brilliant to watch.
OMG. Listing to that motor idle with my headphones on is truly impressive. What a sound. Mike ...you da man.
Wow, that thing LUNGED forward on start up, holy cow. Serious power with a serious prop. Can't wait till she's done!
Epic! That motor is so smoooth.
Didn't expect to see you here Andrew
I can't wait to see your wing design for that airplane
From the looks of it you're never going to see a ring on that street machine
That things sounds like the voodoo P-51 race plane. That thing sounds amazing sir. Great work. Now get wings built so you can fly it.
The content is so incredible... its easy to overlook the absolute pro level editing in these videos. Great sense of humor and really adds to the videos.
So here is a nod to the editor!
Also, holy shit mike so excited for you! What an awesome project. I just passed my A&P tests this last week. I am constantly inspired by you and your thoughts for safety and just engineering in general. Hope i end up half the mechanic and engineer you are.
Hope to meet you some day too.
I'm in my last semester of powerplant right now. Gotta take general and airframe tests still cause covid delayed that for me. Its really cool listening to Mike talk, and understand what he's talking about. Little stuff like the slack in the throttle and mixture control cables.
Thank you Mr. Patey for sharing yet another episode of your pursuit of passion. If you're ever looking for a 55 year old apprentice, please call !
this guys smile is contagious
recently started reading some books about internal combustion and high temperature gas dynamics, and am also deeply inspired by Mike Patey, awesome!
Mike I've always herd. Headers this and Headers that and they perform better and sound better. But I have never understood how and why. Thank you for making that so easy to grasp. Another great video!
One more thing Mike. I think you got the best plane video on youtube hands down.
What a finish...man, what a tease. Can't wait for the static thrust test....will prove to make Scrappy "practical" after all as it could double as a tow truck...
Where is the LOVE button on this page?! What a massive beast. You're amazing Mr. Patey! Your down to earth persona is unconditional and the world needs more of it!
You got that right! ......Then I realized that the SUBSCRIBE is the love-button😁❤
It’s been like a month of pure hell waiting for this episode aaaarrrggghhhh
man, Scrappy looks SO cool!
Let's fire this thing up at 3:00 am! Hell yeah!!