How to install rear view reversing night vision camera. 2004 Honda Accord. Xtron

แชร์
ฝัง
  • เผยแพร่เมื่อ 7 พ.ย. 2024

ความคิดเห็น • 51

  • @Jez1963UK
    @Jez1963UK ปีที่แล้ว +3

    A really useful video because whilst I have a different camera and requirement, you've shown me how to remove some of those interior trim panels :) So, thank you for that and well done!

  • @bazperkins
    @bazperkins 11 หลายเดือนก่อน

    Thanks for the video I am putting a dash cam with reverse camera in my wifes honda accord euro 2004 in Australia. What a nightmare running the cable from the rear to the dash. Thanks for your help mate.

  • @blouie0
    @blouie0 ปีที่แล้ว +1

    Thanks for sharing. When I install the camera on my 2012 Accord, I had cut a slit in the license plate light fixture. Planning to install one in a 2007 Accord. Will check out if would be better to go through the taillight as you had done.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว

      Welcome. And Ofcourse what ever it’s easier with minimal damage to original car set up

  • @ggtaruc2578
    @ggtaruc2578 3 ปีที่แล้ว +3

    Thaks for the video. Was it really necessary to remove the back seats if you were just going thru to the rocker covers anyway?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  3 ปีที่แล้ว +4

      Hey thank you. The wire I tapped to it’s right there behind the back of the back seat. It’s not necessary to remove but it made the job easier if you chose to tap into another wire. I also needed to fix the lining of the carpet under the seat. So it was convenient for me.

  • @breezy1840
    @breezy1840 2 ปีที่แล้ว +2

    hey bro, wiring in my headunit and which cable did you put the orange one on ? i have the yellow plugged in but can’t seem to know where the orange goes to

  • @bobreichel
    @bobreichel ปีที่แล้ว +2

    Was there anything you had to do in the android unit to get the camera to work? I've got power but the camera does not come on when I go into reverse.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว +1

      Im sure a wire plugs into the android and the other to the reverse light I went through the whole thing on my video.

  • @TopSpin361
    @TopSpin361 2 ปีที่แล้ว +3

    Roman Reigns over here in his backyard upgrading his ride.

  • @PeepTHISOut
    @PeepTHISOut 3 ปีที่แล้ว +4

    Fantastic video, my friend! I'm looking into the XTRONS model for my 2005 Honda Accord EX. Definitely gonna get the backup cam with it too. How could you not when it's only $25 or so and it'll give you the added security and convenience when you park?! Thanks for producing this! :-)

  • @EduardoDiaz-v9d
    @EduardoDiaz-v9d 7 หลายเดือนก่อน

    Great video, thankfully for me I was swapping my brown ugly tan interior for a black leather/carbon fiber plastic combination so my interior can be destroyed or is removable at this point.. until I finish the interior fully new steering wheel and dash as well

  • @all_the_hype
    @all_the_hype 4 ปีที่แล้ว +3

    Nice video, much appreciated 👍🏼

  • @MrJoec68
    @MrJoec68 3 ปีที่แล้ว +2

    Excellent video

  • @christopherbeltran5020
    @christopherbeltran5020 2 ปีที่แล้ว +1

    hey brother I have the same unit as you what did you do with the wire that is labeled "reverse in" because when I put it in reverse the head unit doesn't seem to know its in reverse and doesn't change the source to display the back up camera. I have the wire that just says reverse and the red power positive wire connected together so it should be working but its not.

  • @ARSONXBELLA
    @ARSONXBELLA 7 หลายเดือนก่อน

    reverse lights?

  • @LilBoi1da
    @LilBoi1da 4 ปีที่แล้ว +3

    Mine shows no input when it goes into reverse. Is there a setting that I have to change?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 ปีที่แล้ว +1

      SoSo Beats did you make sure you plug your power to the light and the input to the reverse wire?

    • @LilBoi1da
      @LilBoi1da 4 ปีที่แล้ว +1

      @@Jaime.grijalva.official yes, everything is plugged in. The screen automatically goes to the reverse camera but just keeps saying no input.

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 ปีที่แล้ว +1

      SoSo Beats so basically it’s not getting power into the input wire. So change the source I ran a wire from the reverse lights to the input behind the radio.

    • @LilBoi1da
      @LilBoi1da 4 ปีที่แล้ว +1

      @@Jaime.grijalva.official so run a wire from the green backup light to the back of the radio to the wire that says backup?

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  4 ปีที่แล้ว +1

      SoSo Beats yes it should be back up input.

  • @LegalizeAsbestosMerica
    @LegalizeAsbestosMerica ปีที่แล้ว +1

    I spliced my wires now the back up lights won’t come on 😤 and yes positive with positive and negative with negative. I checked the fuse and it’s not burnt…

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว

      You didn’t cut it completely right. Check that the other end in not making contact with metal.

    • @LegalizeAsbestosMerica
      @LegalizeAsbestosMerica ปีที่แล้ว

      Yes I did cut it completely…. 💀

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว

      Oh no. Connect the wire back and make sure the red wire attached to it.

  • @heavensent5181
    @heavensent5181 ปีที่แล้ว +1

    Can you change mine for me please

  • @TruthitInc
    @TruthitInc ปีที่แล้ว +1

    He didn’t show where the wires go in the back of the radio. 🙄

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว

      Ofcourse I did watch it again. Red wite goes with pink. Then the yellow plug in goes with camera in.

  • @rcombs121
    @rcombs121 ปีที่แล้ว +1

    My god, it's a wire, you didn't need to remove all that!

    • @Jaime.grijalva.official
      @Jaime.grijalva.official  ปีที่แล้ว

      😂🤣😂🤣 I was doing other things as well. Just showed people who may want to tuck it properly.