I like Glock but hate the grip angle so I've been waiting for a reliable clone to come out and I hope this will be the one. We'll see how it performs in the next 6 months or so, and if it shows to be reliable I'll get one.
I tried it out early this week it’s a decent firearm and will sell good. If I had $400-$450 and wanted more bang for my buck I would grab this!I think if you don’t own a Glock 19…and don’t wanna spend quite as much. This would be a great buy. Ruger quality is decent. And The customer service has been great from the 2 times I’ve contacted them. Firing pin broke in my LC9S. Ruger sent me a new part. Slide rusted on my LCP max. They sent me a new slide right away. This would be a great buy for a 1st time gun owner!
I’ve also had issues with Ruger’s oxide coating and quality of the LC9s. I’m happy to see the rxm using the same quality engineering of Glock gen 3 parts and nitride finish that will resist rust much better than black oxide.
If only everyone else saw it that way instead of hiding their precious little ears and eyes from things, they don’t want to hear because they are fan boys. Maybe they could get a real review instead of petting their ego and hearing what they want to hear from people that received free guns
Come on, bro why do you say that. I don’t have a right to be angry about a American company that should have made their own gun instead of copying someone else and getting another company to make a lower for them. I was hoping for better from them.
Loaded chamber indicators are required for sale in some jurisdictions in the USA. The "peep hole" is a low maintenance answer to the problem without adding the oft used flip up lever with spring. That being said, a raised area on the extractor (ala Glock) would suffice rather than the peep hole.
Yeah, anything but something to throw oil all over my glass. I was not aware of the loaded chamber law. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Sounds like you don’t like Glocks, with green tritium 😂 Glock should’ve done these upgrades first. For $400 it’ll be great seller, and really a bargain for what it is.
About copying of Glock. It’s the AR15 of pistols. More competition is more better. Glocks are seriously lacking in features. The slick slides and poor ergos are brutal. I actually run Shadow Sytems and picked up an echelon recently too.
Man, I wonder if the people making these comments have even held this gun or have they even seen this gun in person or better yet? Have they even shot this gun because I believe they would feel differently about it if they saw it in person. Thanks for watching it for commenting and be sure to subscribe if you have not already.
@@GSquaredTactical I have not held one, but glocks are bricks. Really most consumers buy with no real knowledge. They don’t know proper grip positioning, sights, trigger pull or anything. Then the price this is coming in at, and Rugers ability to get it in every gun shop, it’ll be the next High Point, S&W Sigma, Taurus -in every police evidence locker room 😆
@ they arrived today at my local gun store while was there. Got to handle one. For $400 it’s a fine pistol with lots of features for the money. It needs nothing but an optic if the purchaser wants. The plastic feels cheap. It’s typical magpul. The trigger is typical Glock. The slide serrations and finish is leagues better. I wasn’t prepared to take one home today, but they set one aside for me to pick up tomorrow. I’m gonna run it. For the $400 and the features, this thing is more nipping on the Shadow Systems market. Unless there is reliability issues, I can’t see Glock being worth the cost. Plus these upgrades would make a Glock well over $1k. I don’t feel like I’ll love it, but I’ll appreciate its utility. The echelon is my top favorite duty gun of all time, but it’s simply not supported like Glock.
Here’s the thing about it the open and closed if you will. I have said for a long time with Ruger being a great American company with great customer service that makes tremendous rifles and revolvers. Why is it other than some of their 22s which are steel frame why are there polymer offerings so bad so horrible and I have said for a long time they needed to make a change. Give them a facelift if you will. When I heard that they were releasing a new polymer frame gun I was super stoked for that. Then I learned they basically punked out and had someone else make the lower for them and then to a T cloned a Glock it was just disappointing to me. Then I thought to myself well maybe they know something I don’t of course I have to review the gun being a reviewer so I went and picked it up and having probably shot or reviewed every other Glock clone that has probably ever been made including BCA this one probably ranks somewhere in the bottom 20% as in if there were 100 Glock clones, this one would be about 80 on the list with one being the best and 100 being the worst and to be honest that’s giving them some credit only because I have not got to shoot it a ton and I had some issues with the optic I was using. I mean, not only did they clone a Glock but in my humble opinion, they did not even do a great job of that and I wonder if all the people getting angry at me and casting shade my way have even sold. The pistol in person have even held it. Do they even own it or have they even shot it or are they so sold out to a brand? Are they such fan boys? They cannot accept someone basically just telling it like it is and just because everyone else on TH-cam who likely got their gun for free says that it’s great. They reference those people as if that means anything to me. I don’t give a crap what somebody said who likely got the gun for free because less face it other than a handful of tubers only really two that I can think of that get free guns actually will dog a free gun. If it’s not great the rest of them literally never have a bad thing to say about any gun ever nothing all of them are great every single one one’s better than the next come on people you have to know that’s not true. Don’t get me wrong. I would love to get free guns from manufacturers, but because I have spent the last three years telling the truth about any of them that was not great. I likely never will get free guns from manufacturers because they don’t want to send guns to people who are going to not have all things great to say about them and that’s perfectly fine with me because I’m going to buy these guns anyway. I did not start this TH-cam channel to get filthy Rich and people can support me on other platforms like Patreon or send me a super thanks TH-cam. Sorry about the ranting thanks for watching and be sure to subscribe if you have not already.
This is a good, honest review. At the $360-399 it's currently going for, Ruger will sell truckloads of them. The big deal is not that it's "another clone." The big deal is the Glock mag compatible chassis system. This initial offering is only the beginning. Ruger should partner with Flux Defense to make a Glock mag compatible Raider with their chassis.
This is why I watch Gene. When you spend your hard earned money on something, you get it straight, unlike the countless others who get it for free or get paid and the reviews are never worth anything, just entertainment
Thanks for the review Gene. I appreciate you pointing out the guns finish. Seems as if they rushed this gun out to compete with the echelon 4.0C. I will wait to add this to my collection until maybe they work the kinks out. I don’t know why other ppl are making fun of you or how you talk. Keep doing what you do brother, and God be with you. Thanks again!
Listen man it’s just the way it is bro. One thing I have learned doing this channel is that there really is no genuine 2A like-minded community. In fact, that “” nonexistent community attack one another more than the gun control advocates do. But the thing that is more mind-boggling to me is, if you will notice most of the people who comment and attack me for saying something bad about the gun they’re doing so based off of what other TH-camrs have said not understanding that there is at least a 90% chance they got their gun for free and even if they didn’t, that is their hope they don’t want to piss off any manufacturers and never get anything from them whereas I genuinely don’t care because that’s why I started this channel. In fact, if I was a manufacturer, I would want to send my firearms to people like me people that the community can trust will tell the truth. But we both know that’s never going to happen. So these people are trashing me for three reasons one because they are fan boys of the brand and if the CEO from Ruger pulled his pants down and crapped in their face, they would say it was an accident and congratulate him on a fine turd and that’s just facts. The second group or groups of people that are likely sitting in a beanbag chair in their mom‘s basement eating Doritos playing the game boy and watching other TH-cam videos, and because all of the rest of them were raving reviews I must be the one telling a lie when the reality is the opposite is true. And three most of these people have probably never even held the gun do not own the gun have likely never even saw it in person so how do they know and I genuinely want to know that? Knowing what I know about this gun with the understanding that I’m going to shoot it some more I’m going to give it a fair shake as I have not shot it much because I was running low on ammunition and my optic failed, but knowing what I know so far, there is literally no way that some of the TH-camrs I have saw rave and carry on about this gun can be telling the complete utter and honest truth just no way they are definitely doing it because they got the gun for free and although Ruger is not paying them to do a review if they send them a free $400 gun that they can turn around and sell for profit they basically are and they don’t want to bite the hand that feeds them. Well. God is going to be the only hand that feeds me and if I can’t make it with the TH-cam channel otherwise then I will just shut it down, but you are going to get the truth on this channel. You feel me?
My guess is this gun will sell well. Glock clone, availability, budget price and Ruger’s notoriety. The Bul Armory Axe would dominate the clone wars but they can be hard to find.
I'm sure the axe would but thing is its more expensive then 99% of the glock 19s my gun store has. Same with shadow systems I'd rather have the original. Where guns like the ruger and psa dagger shine is they're $100-$300 cheaper then glock. That's why I think this will sell well personally
This gun is no clone. It's better than any glock clone. Get it cerakoted if you don't like the finish. You're still keeping it under price for what a glock fan boi would spend on a new glock, and then tack on another $300 plus on upgrading it.
@GSquaredTactical so you mentioned the cost of grip modules and I thought I would chime in as I did a deep dive on this firearm as soon as the videos were released a few days ago. You can order additional frames directly from Magpul for 39.99 and it comes with 2 15 or 10 round P.mags included. They are only offering the 19 sizes frame as of right now but have said that different sizes and colors are in the future but the release dates are in a TBD status. Not having handled one yet, I do not know how thick the wall material is, but if it were me I would simply invest the 40 bucks plus shipping and get another frame and do some custom contouring to the trigger guard under cut and in the beaver tail area. If the palm swell areas are sturdy enough I might even put in some scalloping where the thumb and forefinger contact the grip frame so that the frame isn't simply flat and then maybe add some extra stippling in that area. Look at it like this it is like building a poly-80 lower and even if you mess it up it wasn't a total loss because you still have two more magazines for the existing pistol.
The rxm comes with a really nice built-in sight. when there is a red bullseye at the shooting range which one is easier to see the Green Dot or the red? Why put extra hand sites on a hand pistol ? A rifle or a shotgun yes I can understand that one.
Alright, I'll throw up a question to you since you have rounds through them. The RXM or the CZ P09 Nocturne? I know they're different styles of gun but just curious.I plan on buying one or the other after Christmas.
The only negative review I’ve come across. Personally if you don’t like the RXM trigger , what’s your opinion on a stock Glock trigger? I like the 1911 grip angle and grip texture . What better then my G45. The finish on mine is fine . Overall it’s a steal for the price and very very accurate . The optic mounting system is far far superior to the MOS system as well.
You see that’s what everyone always says. They don’t ever say hey I have held this gun. Heck I’ve even saw it in person. I mean, you know hey I have actually shot this gun and I don’t agree with your assessment. They always compare what I have to say with This is the first negative review I have saw everyone else was singing its praises not understanding that everyone else that currently has reviews up received that their guns for free and I do not and when I pay my hard earned money for something it’s going to be a fair and honest review no matter if the Ruger fan boys get angry about it or not.
And to answer your question, I’m not a fan of Glock in general, but I also don’t hate them. The best striker fired trigger sadly is Canik as much as I hate to admit that, but in light of just being honest, I must and my favorite brand of fire arm overall is CZ
Better stock grip (feel in the hand), better slide and optic mounting systems complete with way better serrations, better sights, more accurate, better material from the polymer to the slide and barrel and that’s just getting started
glad to hear a more 'meh' take on it. I'm still somewhat interested to see where they take the platform, but I'm definitely not running out to get one. I do love modular systems though once they get supported well like the 365 series.
I don’t know, man maybe but I buy my own guns. There’s no company going to tell me how to feel about a gun to get paid because I don’t need their money. I just need to be honest, live my life die, and spend eternity with my savior. Thanks for watching and for commenting and be sure to subscribe if you have not already.
I just think there's absolutely way too many Glock style pistols out there especially with Turkish companies. A lot of pistols that come from Turkey derive their blueprints from Glock. You've got PSA, Bear Creek Arsenal, Armscore, etc. all have Glock style pistols. I understand this is Magpul's first test run but I agree as well I think they could've spruced up the lower assembly a little bit.
The only Turkish company I know that uses the Walther design basically a clone of it is Canik. Most of the Turkish companies are pretty original, although there are a couple that has cloned a Glock like Tisas. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Some one else said something like that but I don’t know what that means or how to fix it. I listen on my PC, MacBook, I pad android and I phone and I hear audio fine. I’m not sure what left and right channel means
@@GSquaredTactical We humans have stereo hearing, meaning 2 channels, that being the left and right ears. The left channel is for the left ear & the right channel is for the right ear. In this instance, sound only came for the right ear.👂
@GSquaredTactical oh no my p07 isn't going no where it will always have a spot in my carry rotation. I love my echelon 4.5 and want an optic ready compact for carry
@ I love Glocks dude like I love this gun I think ruger is wack but I wish I could get one of these they did a great job it would look sick with a Glock slide
Right? I can assure you that anyone that does not like my comments concerning the gun and thinking that I have bias and that I do not like Ruger could not be more wrong and they have likely not held this gun nor have they shot this gun and likely have not even saw this gun in person. They are just Ruger fan boys that don’t want to hear anyone say anything negative about the brand But this in my opinion is a very cheaply made firearm and there are way better Glock clone options on the market for $400 or in a lot of cases less.
That's exactly what pisses me off with Ruger. They have their own pistol design. It's the Ruger American Pistol. That gun needs a face lift the same way Beretta did their APX-A1. Redesign slide with Magpul doing the grip mods for the Ruger American. That would've been perfect that gun already has an FCI, and it's wayy easier to take out. They made Glock clone for what, just to tap in that already saturated market. When they could've been doing what Sig is doing with the P320 years ago. The American pistol came out in 2015 with an FCI. This was a lame move by Ruger. Hopefully it does better than i anticipated. Great video. I appreciate the first honest non 🐓 slupping review.
Exactly I started this TH-cam channel. Never believing it would be much of anything much less receiving 42,000 subscribers in three years for that very reason refusing to coward down to the big manufacturer that wanted to pay me to say nice things about their gun and honestly, it’s not that they Pay the reviewer but they give them a free gun and let them keep it and they sell it for profit and it’s not always that they tell you to say nice things. It’s just a given that if you’re trash yet, they won’t send you anything else. I don’t need their guns or their money I was going to buy them anyway so I’m going to say what I believe to be true. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Interesting. I think your evaluation is the most negative one I've watched. Thanks. Personally I have no current interest in another striker 9 glock clone but the modular concept is interesting. Already subscribed.
Yeah well as the new guy in the gun store said when he found out I review guns….”man that’s cool bro ima watch yours first.” What’s cool?…”that you buy your own guns to review bro the other tuber locally that comes in here would eat a turd I crapped in a napkin straight off the floor in front of everyone if there was $20 in it for him.” You can’t be bought because you bought it so it can’t be anything but unbiased
I went to my LGS yesterday as they got them in. Was intrigued initially when I seen the first reviews but after seeing and holding the RXM, nothing special or "most have" variant of a Glock Clone. I was really wanting to like this new clone but a hard pass for me. Went and bought me a Radian Ramjet and Afterburner for my P365 instead, think that was a better investment on my side. Some will like it and that is fine, just not something that tickled my fancy.
That’s what I’ve been saying, all along half of the people that will dog me for what I had to say about it has not even held one probably not even seen one and certainly probably does not even own one. They just watched other reviews from people that was given the gun and/or trying to impress Ruger so they can get something for free And that makes them feel good about themselves because they’re Ruger fan boys and they don’t want to hear anything negative about it. Thanks for watching and for commenting and be sure to subscribe if you have not already
@@GSquaredTactical I personally love your reviews. As I said, I watched several and it had me intrigued. But in the end, when I actually got to handle it, it just is another Glock clone that others have done already, with the exception maybe of the serialized trigger assembly. I like Ruger revolvers but not a fan of their semiautomatic line of handguns. And I also agree that Ruger is a bit late to the game with another clone gun, and for a big name manufacturer, come up with something that is yours and not just a copy. Keep it up brother, haters gonna hate but in the end, honest reviews is what I like, if it is a good gun, great, if it sucks, I want to know. This one, even though I did not shoot it, just is nothing special that I need to fill a square, I will stick with my Sigs, Springfields and Caniks that fill this space.
Finally someone actually paid for this POS gun. I own one of these. The trigger is garbage, grip sucks, (actually got slide bite). It just sits in the range bag until I upgrade the trigger and grip frame. Hoping they take the Echelon approach with various sizes. It’s a disappointment though waste of money. But at least it fits holsters I already have.
Makes a difference when you spend your own money doesn’t it. I wish more people would subscribe and watch my videos instead of wetting their pants over other free gun tubers because they want to believe their favorite brand is the best. Ruger crapped the bed on this one.
Yeah, that’s because it is made very cheaply. The same day I bought a Bul Armory Axe that was $51 cheaper and although it’s not optic ready and does not have a front site is built like a tank in comparison to this one and shoots way way better.
Steyr was the first to come out with a modular removable chassis. They even sued sig for patent infringement. I love Glocks but who cares about another Glock rip off.
Mine never had issues out of the box put a viridian sro style dot on and radian ramjet afterburner and armament guide rod and spring and have shot over 300 rounds flawless and I have tiny hand syndrome check it out on my page and it’s Glock gen 3 part compatible so change what you want
I don’t delete any comments only some viewers all together so if you aren’t hidden from the channel which obviously you are not then it wasn’t me who deleted your comment sir!! What was the positive comment?
"I'd say this will be more reliable than a Sig(not a high bar) while only costing about a third of what some Sigs do. You're getting a gen 3 Glock with an FCU for the price of a Taurus G3, and your only real complaints are nitpicks. You kinda come off like an old fud who don't care about what the young hipsters are doing with guns these days. You also complain about an American company not using an American design, but American, foreign stuff bad, but you have an el-cheapo Chinesium optic on the gun...you're wearing a hoodie with an Israeli company on it, and driving a vehicle made by an Italian owned company. Your high horse is looking like a jenga tower... Personally can't wait for the pdw chassis using this FCU and Glock accessories. And there is a good chance magpul will be offering one. meaning quality at a reasonable price."
Mine never had issues out of the box put a viridian sro style dot on and radian ramjet afterburner and armament guide rod and spring and have shot over 300 rounds flawless and I have tiny hand syndrome check it out on my page
Yeah, I spent $350 on a Bul Armory Axe that will shoot circles around this thing and built like a tank in comparison into this Lego. Same can be said about the XD mod3. With Guns like that out there $400 is not necessarily budget especially for this toy.
Guy doesn't get it. Are Glock clones getting tiring? Yes, absolutely. But Glocks are getting tiring, overpriced, and outdated. Modern buyers want modern features, future-proofing, and not just safety/reliability. Until now, with the RXM, no gun has offered all three while also being reasonably priced. Let's go over it. By "modern features," I mean a well-thought-out optics mounting system since these days, if you're not running a red dot, you're living in the past. The Glock MOS is a joke. Custom-cut slides are an overpriced hassle that usually results in a commitment to a single optic or a lack of ability to hold zero. Sig and the RXM are the only platforms worth a damn for this. For future proofing, I mean a swappable FCU or chassis system so the user can adapt a single firearm to cover a broader range of roles. This is why the AR platform is so popular. Glock might be working on this, but the clock is ticking. Right now, it's just Sig, again, and Zev that offer these features. We'll come back to Zev. Nothing mentioned above beats the old Gen 3 Glock platform in terms of safety and reliability. Sig is still teething through its drop-safe issues and dealing with surface rust. Woof. This just about leaves us with the Zev OZ9 and this new RXM. Zev does not have a mounting system as well developed as Ruger's, which is genius. I do, however, appreciate your insights about the loaded chamber indicator cutaway. You made an excellent point. It's too bad that nobody makes Gen 3 aftermarket barrels without it (that's sarcasm). Something else Zev needs to have that Ruger does is the mass production infrastructure to churn these little bits of freedom out at a reasonable price. Forget reliability: Zev wants $1,500.00 for their Glonk, while the RXM retails for $500 and under if you're lucky enough to live in the middle of nowhere. So if you go with the Ruger, you're supporting an entirely stateside American company without a pompous attitude that wants to put as many of the most reliable, safe, feature-rich weapons in as many Americans' hands as possible, regardless of economic status. It's embarrassing that you couldn't see this. Sure, there's a high chance we'll see some gremlins pop up over the next few years as we do with any new gun, but starting with a proven platform will help offset and minimize them. You're welcome for the comment. Gobbless.
Yeah a bunch of fan boys that can’t accept that Ruger continues the tradition of making great rifles and revolvers but continues to make ugly low quality polymer semis and this one isn’t any different. Everyone talking the smack probably hasn’t even held one lol. Wipe the Cheeto stains off your keyboard because obviously you sitting in a beanbag chair next to a PlayStation typing up a novel. ✌️
@@GSquaredTactical Magpul is making the polymer on this one pops. Ruger is just beating Glock at their own game. Ruger continues to provide high value pistols at a low price point while you spout ignorant outdated opinions at people who know more and shoot better than you do.
Bro video was up 2-1/2 minutes and you already talking about the fuse 😂🤣😂. Video is 23 minutes long. Come on bro did you watch the video? Man you on that Fuse aren’t you? Do you own the Fuse
My Jeep has brought me a lot of joy and got me out of a lot of tight spots. I wasn’t a fan when I initially bought it I drive a 2022 3500 Duramax the jeep is my wife’s
@ cool Jeep is not the same as the old days. Cool but build quality is lacking. Not like the old days. I’m an old guy so I remember when they were super cool.
@ something about the gun never sparked my interest in the first place and to hear what I already thought in your review. Let me know how accurate I was just from a glance that’s all big brother.
@ Good ole Croatian polymer imported by a company that donates money to anti gun legislators and has extractors, grip safeties, and trigger bars that constantly fail, over American Magpul polymer and a sturdy Glock design manufactured by Ruger? No thanks.
@@CloyceSpears Why would I care if it's an Austria copy? It works and it's successful. The AK is a copy of the Garand gas system. Almost every modern machinegun in some way copies the MG42, and how many copies are there of the 1911, CZ-75, or Ar-15? How many handgun designs copy the browning locking breech? Like it or not, Glock got the design for a simple inexpensive polymer pistol right; and it's about time we're getting some value options from large reputable American brands like Ruger and Magpul.
I agree with everything he said on this video. The critiques of the gun and the dig on Ruger! that is embarrassing. They should be ashamed of themselves. When you have to make a Glock clone, you're Admitting defeat
Is every major gun company that makes a 1911 admitting defeat? Is every major gun company that makes an AR admitting defeat? Every 1911 that is not a Colt or a military issues is a clone. Every AR that is not an Armalite or Colt is a clone. You have to realize that Glock is not simply it's own brand anymore. Glock is a platform now, just like a 1911 or an AR.
@mikevaquero3766 well said brother! Glock is definitely a platform that other manufacturers can build on. Ruger did a great job by making an affordable gun that the average Joe can afford to buy so they can use for ccw with modern upgrades like the optic system, and trigger. I honestly don't understand all the hate! Not everyone may like it, but they don't have to like it, a lot of other people will!
Couldn't disagree more. This was a smart move by Ruger and Magpul and my guess is this will sell really well. I'm all for any new gun that uses cheap Glock mags. Glock OEM mags are roughly 1/3 of the price of virtually every other gun maker like Sig, Smith and Wesson and Springfield if you look in the right places.
@quoththeraven7 absolutely I’m not hating on Ruger. I’m just disappointed as long as I have wished they would change their ugly lackluster, polymer handguns, and then they do this
OK, so they cloned a competitor for the Almighty dollar that makes me think even less of them and it’s OK if you disagree because I disagree with you disagreeing lol 😂
I have a hard time trusting someone on their opinions of anything if they drive a Jeep.
I will trust a person driving any gasoline or diesel powered vehicle before someone driving an electric vehicle.For damn sure😂
@briancasey8569 hahaha well I guess I can agree with you on that.
What a roast!
What if it was a CJ5 or CJ7?
@DS..69 I guess I should specify any Jeep post 2006. Before then you're good and I'll trust you, especially if it's a 69 gladiator swapped with a 6BT.
I love an honest review. I always seek out the critical reviews on a new gun I am considering. Thanks!
Yeah for watching and be sure to subscribe if you haven’t already
I like Glock but hate the grip angle so I've been waiting for a reliable clone to come out and I hope this will be the one. We'll see how it performs in the next 6 months or so, and if it shows to be reliable I'll get one.
Get a Dagger honestly...
Get a Bul Armory Ace Cleaver full size or compact. Thanks for watching in the commenting and be sure to subscribe if you have not already.
Yess..Mi us that Glock hump?? Shud be much nicer?? 😊
I tried it out early this week it’s a decent firearm and will sell good. If I had $400-$450 and wanted more bang for my buck I would grab this!I think if you don’t own a Glock 19…and don’t wanna spend quite as much. This would be a great buy.
Ruger quality is decent. And The customer service has been great from the 2 times I’ve contacted them. Firing pin broke in my LC9S. Ruger sent me a new part. Slide rusted on my LCP max. They sent me a new slide right away.
This would be a great buy for a 1st time gun owner!
I’ve also had issues with Ruger’s oxide coating and quality of the LC9s. I’m happy to see the rxm using the same quality engineering of Glock gen 3 parts and nitride finish that will resist rust much better than black oxide.
👍🏻
👍🏻
Nice to see an honest review, clear review. Nice job.
If only everyone else saw it that way instead of hiding their precious little ears and eyes from things, they don’t want to hear because they are fan boys. Maybe they could get a real review instead of petting their ego and hearing what they want to hear from people that received free guns
Thanks for watching and for commenting and be sure to subscribe if you have not already
Someone needs a Snickers lol
Come on, bro why do you say that. I don’t have a right to be angry about a American company that should have made their own gun instead of copying someone else and getting another company to make a lower for them. I was hoping for better from them.
Loaded chamber indicators are required for sale in some jurisdictions in the USA. The "peep hole" is a low maintenance answer to the problem without adding the oft used flip up lever with spring. That being said, a raised area on the extractor (ala Glock) would suffice rather than the peep hole.
Yeah, anything but something to throw oil all over my glass. I was not aware of the loaded chamber law. Thanks for watching and for commenting and be sure to subscribe if you have not already.
grip will be blocky because it uses Glock mags. Glock mags are thicker than any other manufacture mags so you get a thick glock grip all the way up.
The grip looks more rounded than the original Glock. It should be slightly less 2x4 like.
Another reason not to clone a glock
Thanks Gene for the honest feedback
@mikeburklin2675 thanks for watching
Sounds like you don’t like Glocks, with green tritium 😂 Glock should’ve done these upgrades first. For $400 it’ll be great seller, and really a bargain for what it is.
About copying of Glock. It’s the AR15 of pistols. More competition is more better. Glocks are seriously lacking in features. The slick slides and poor ergos are brutal. I actually run Shadow Sytems and picked up an echelon recently too.
Man, I wonder if the people making these comments have even held this gun or have they even seen this gun in person or better yet? Have they even shot this gun because I believe they would feel differently about it if they saw it in person. Thanks for watching it for commenting and be sure to subscribe if you have not already.
@@GSquaredTactical I have not held one, but glocks are bricks. Really most consumers buy with no real knowledge. They don’t know proper grip positioning, sights, trigger pull or anything. Then the price this is coming in at, and Rugers ability to get it in every gun shop, it’ll be the next High Point, S&W Sigma, Taurus -in every police evidence locker room 😆
😂🤣😂🤣😂🤣😂🤣 that’s hilarious
@ they arrived today at my local gun store while was there. Got to handle one. For $400 it’s a fine pistol with lots of features for the money. It needs nothing but an optic if the purchaser wants. The plastic feels cheap. It’s typical magpul. The trigger is typical Glock. The slide serrations and finish is leagues better. I wasn’t prepared to take one home today, but they set one aside for me to pick up tomorrow. I’m gonna run it. For the $400 and the features, this thing is more nipping on the Shadow Systems market. Unless there is reliability issues, I can’t see Glock being worth the cost. Plus these upgrades would make a Glock well over $1k. I don’t feel like I’ll love it, but I’ll appreciate its utility. The echelon is my top favorite duty gun of all time, but it’s simply not supported like Glock.
Appreciate the thoughtful process in your assessments. I think this goes to validate that there is something out there for everyone?
Yessir
Thank you for your honesty. That is why I watch. Really wanted this to be a good one. Oh well, wait and see
Here’s the thing about it the open and closed if you will. I have said for a long time with Ruger being a great American company with great customer service that makes tremendous rifles and revolvers. Why is it other than some of their 22s which are steel frame why are there polymer offerings so bad so horrible and I have said for a long time they needed to make a change. Give them a facelift if you will. When I heard that they were releasing a new polymer frame gun I was super stoked for that. Then I learned they basically punked out and had someone else make the lower for them and then to a T cloned a Glock it was just disappointing to me. Then I thought to myself well maybe they know something I don’t of course I have to review the gun being a reviewer so I went and picked it up and having probably shot or reviewed every other Glock clone that has probably ever been made including BCA this one probably ranks somewhere in the bottom 20% as in if there were 100 Glock clones, this one would be about 80 on the list with one being the best and 100 being the worst and to be honest that’s giving them some credit only because I have not got to shoot it a ton and I had some issues with the optic I was using. I mean, not only did they clone a Glock but in my humble opinion, they did not even do a great job of that and I wonder if all the people getting angry at me and casting shade my way have even sold. The pistol in person have even held it. Do they even own it or have they even shot it or are they so sold out to a brand? Are they such fan boys? They cannot accept someone basically just telling it like it is and just because everyone else on TH-cam who likely got their gun for free says that it’s great. They reference those people as if that means anything to me. I don’t give a crap what somebody said who likely got the gun for free because less face it other than a handful of tubers only really two that I can think of that get free guns actually will dog a free gun. If it’s not great the rest of them literally never have a bad thing to say about any gun ever nothing all of them are great every single one one’s better than the next come on people you have to know that’s not true. Don’t get me wrong. I would love to get free guns from manufacturers, but because I have spent the last three years telling the truth about any of them that was not great. I likely never will get free guns from manufacturers because they don’t want to send guns to people who are going to not have all things great to say about them and that’s perfectly fine with me because I’m going to buy these guns anyway. I did not start this TH-cam channel to get filthy Rich and people can support me on other platforms like Patreon or send me a super thanks TH-cam. Sorry about the ranting thanks for watching and be sure to subscribe if you have not already.
This is a good, honest review. At the $360-399 it's currently going for, Ruger will sell truckloads of them. The big deal is not that it's "another clone." The big deal is the Glock mag compatible chassis system. This initial offering is only the beginning. Ruger should partner with Flux Defense to make a Glock mag compatible Raider with their chassis.
Yeah, like Sig did I just picked up the Legion flux raider and that thing is sick.
This is why I watch Gene. When you spend your hard earned money on something, you get it straight, unlike the countless others who get it for free or get paid and the reviews are never worth anything, just entertainment
That’s exactly right and why more people don’t watch or want to watch truthful reviews is beyond me
@ takes time, they will.
Let’s hope
The truth hurts.. just more money for something new. Great video and thanks Gene. Keep up the good work bro!
Yes sir
Thanks for the review Gene. I appreciate you pointing out the guns finish. Seems as if they rushed this gun out to compete with the echelon 4.0C. I will wait to add this to my collection until maybe they work the kinks out. I don’t know why other ppl are making fun of you or how you talk. Keep doing what you do brother, and God be with you. Thanks again!
Listen man it’s just the way it is bro. One thing I have learned doing this channel is that there really is no genuine 2A like-minded community. In fact, that “” nonexistent community attack one another more than the gun control advocates do. But the thing that is more mind-boggling to me is, if you will notice most of the people who comment and attack me for saying something bad about the gun they’re doing so based off of what other TH-camrs have said not understanding that there is at least a 90% chance they got their gun for free and even if they didn’t, that is their hope they don’t want to piss off any manufacturers and never get anything from them whereas I genuinely don’t care because that’s why I started this channel. In fact, if I was a manufacturer, I would want to send my firearms to people like me people that the community can trust will tell the truth. But we both know that’s never going to happen. So these people are trashing me for three reasons one because they are fan boys of the brand and if the CEO from Ruger pulled his pants down and crapped in their face, they would say it was an accident and congratulate him on a fine turd and that’s just facts. The second group or groups of people that are likely sitting in a beanbag chair in their mom‘s basement eating Doritos playing the game boy and watching other TH-cam videos, and because all of the rest of them were raving reviews I must be the one telling a lie when the reality is the opposite is true. And three most of these people have probably never even held the gun do not own the gun have likely never even saw it in person so how do they know and I genuinely want to know that? Knowing what I know about this gun with the understanding that I’m going to shoot it some more I’m going to give it a fair shake as I have not shot it much because I was running low on ammunition and my optic failed, but knowing what I know so far, there is literally no way that some of the TH-camrs I have saw rave and carry on about this gun can be telling the complete utter and honest truth just no way they are definitely doing it because they got the gun for free and although Ruger is not paying them to do a review if they send them a free $400 gun that they can turn around and sell for profit they basically are and they don’t want to bite the hand that feeds them. Well. God is going to be the only hand that feeds me and if I can’t make it with the TH-cam channel otherwise then I will just shut it down, but you are going to get the truth on this channel. You feel me?
My guess is this gun will sell well. Glock clone, availability, budget price and Ruger’s notoriety. The Bul Armory Axe would dominate the clone wars but they can be hard to find.
I'm sure the axe would but thing is its more expensive then 99% of the glock 19s my gun store has. Same with shadow systems I'd rather have the original. Where guns like the ruger and psa dagger shine is they're $100-$300 cheaper then glock. That's why I think this will sell well personally
This gun is no clone. It's better than any glock clone. Get it cerakoted if you don't like the finish. You're still keeping it under price for what a glock fan boi would spend on a new glock, and then tack on another $300 plus on upgrading it.
The Axe $349.99 on the high end in my area
Not better than any clone except maybe a BCA
@@GSquaredTactical wow I've never seen one under $600
@GSquaredTactical so you mentioned the cost of grip modules and I thought I would chime in as I did a deep dive on this firearm as soon as the videos were released a few days ago. You can order additional frames directly from Magpul for 39.99 and it comes with 2 15 or 10 round P.mags included. They are only offering the 19 sizes frame as of right now but have said that different sizes and colors are in the future but the release dates are in a TBD status. Not having handled one yet, I do not know how thick the wall material is, but if it were me I would simply invest the 40 bucks plus shipping and get another frame and do some custom contouring to the trigger guard under cut and in the beaver tail area. If the palm swell areas are sturdy enough I might even put in some scalloping where the thumb and forefinger contact the grip frame so that the frame isn't simply flat and then maybe add some extra stippling in that area. Look at it like this it is like building a poly-80 lower and even if you mess it up it wasn't a total loss because you still have two more magazines for the existing pistol.
Thanks for this info
Is the grip the same thickness as a Glock?
I’m not a fan of a Glock either
The rxm comes with a really nice built-in sight. when there is a red bullseye at the shooting range which one is easier to see the Green Dot or the red? Why put extra hand sites on a hand pistol ? A rifle or a shotgun yes I can understand that one.
Thanks for watching and for sharing your thoughts
Alright, I'll throw up a question to you since you have rounds through them. The RXM or the CZ P09 Nocturne? I know they're different styles of gun but just curious.I plan on buying one or the other after Christmas.
100,000% the Nocturne
The only negative review I’ve come across. Personally if you don’t like the RXM trigger , what’s your opinion on a stock Glock trigger? I like the 1911 grip angle and grip texture . What better then my G45. The finish on mine is fine . Overall it’s a steal for the price and very very accurate . The optic mounting system is far far superior to the MOS system as well.
You see that’s what everyone always says. They don’t ever say hey I have held this gun. Heck I’ve even saw it in person. I mean, you know hey I have actually shot this gun and I don’t agree with your assessment. They always compare what I have to say with This is the first negative review I have saw everyone else was singing its praises not understanding that everyone else that currently has reviews up received that their guns for free and I do not and when I pay my hard earned money for something it’s going to be a fair and honest review no matter if the Ruger fan boys get angry about it or not.
And to answer your question, I’m not a fan of Glock in general, but I also don’t hate them. The best striker fired trigger sadly is Canik as much as I hate to admit that, but in light of just being honest, I must and my favorite brand of fire arm overall is CZ
Saw this for $399. I don’t care about looks on a polymer piece. As long as its reliable.
Fair enough
Normally I should ask how it compares to sig fuse. But this has become boring. Will there be a comparison to the echelon compact?
No need echelon way way way way way way way way way way better
@@GSquaredTacticalHow? Back up the hyperbole.
What?
@@GSquaredTactical how’s it better
Better stock grip (feel in the hand), better slide and optic mounting systems complete with way better serrations, better sights, more accurate, better material from the polymer to the slide and barrel and that’s just getting started
glad to hear a more 'meh' take on it. I'm still somewhat interested to see where they take the platform, but I'm definitely not running out to get one. I do love modular systems though once they get supported well like the 365 series.
I don’t know, man maybe but I buy my own guns. There’s no company going to tell me how to feel about a gun to get paid because I don’t need their money. I just need to be honest, live my life die, and spend eternity with my savior. Thanks for watching and for commenting and be sure to subscribe if you have not already.
I just think there's absolutely way too many Glock style pistols out there especially with Turkish companies. A lot of pistols that come from Turkey derive their blueprints from Glock. You've got PSA, Bear Creek Arsenal, Armscore, etc. all have Glock style pistols. I understand this is Magpul's first test run but I agree as well I think they could've spruced up the lower assembly a little bit.
Glock style, 1911 style, revolver style, not much to pick from
Yeah, that’s what I was thinking. Like come on, bro it’s the most blocky plain lackluster frame. I have probably seen in quite some time.
Actually a lot of Turkish companies use what was originally a Walther design.
The only Turkish company I know that uses the Walther design basically a clone of it is Canik. Most of the Turkish companies are pretty original, although there are a couple that has cloned a Glock like Tisas. Thanks for watching and for commenting and be sure to subscribe if you have not already.
@@GSquaredTactical Don’t forget the CZ75 clones.
BTW, for some reason on YT, I only hear you on the right channel. There is no audio on the left channel.
Some one else said something like that but I don’t know what that means or how to fix it. I listen on my PC, MacBook, I pad android and I phone and I hear audio fine. I’m not sure what left and right channel means
@@GSquaredTactical We humans have stereo hearing, meaning 2 channels, that being the left and right ears. The left channel is for the left ear & the right channel is for the right ear. In this instance, sound only came for the right ear.👂
Like you had AirPods in
@@GSquaredTactical I use wireless headphones. Other YT videos do not have this issue, so I assumed the problem was not the headphones.
Well, heck man, I would have no idea on how to fix that. I will research it.
Really do like this, but now that springfield has the echolon compact thats probably what will fianally replace my trusty old cz p07
No don’t get rid of the P07 lol. Thanks for watching and commenting and be sure to subscribe if you haven’t already
@GSquaredTactical oh no my p07 isn't going no where it will always have a spot in my carry rotation. I love my echelon 4.5 and want an optic ready compact for carry
Ok good 😂
Dudes pissed
lol I mean come on who wants another Glock clone especially not even a good one and from an American company that has always been their own
@ I love Glocks dude like I love this gun I think ruger is wack but I wish I could get one of these they did a great job it would look sick with a Glock slide
Haha I might try that
So Basically It's If Sig And Glock Had An American Made Poverty Baby 😂 And Magpul Just Happened To Watch In The Corner
😂🤣😂🤣😂🤣😂🤣
I don't understand why they developed a gun that has a universal optic mounting system and then added a witness hole in front of it.
Right? I can assure you that anyone that does not like my comments concerning the gun and thinking that I have bias and that I do not like Ruger could not be more wrong and they have likely not held this gun nor have they shot this gun and likely have not even saw this gun in person. They are just Ruger fan boys that don’t want to hear anyone say anything negative about the brand But this in my opinion is a very cheaply made firearm and there are way better Glock clone options on the market for $400 or in a lot of cases less.
Another great video! Praise to Yahweh!
Yessir
By the way, I'll keep my Mod3...
Yeah good choice
That's exactly what pisses me off with Ruger. They have their own pistol design. It's the Ruger American Pistol. That gun needs a face lift the same way Beretta did their APX-A1. Redesign slide with Magpul doing the grip mods for the Ruger American. That would've been perfect that gun already has an FCI, and it's wayy easier to take out. They made Glock clone for what, just to tap in that already saturated market. When they could've been doing what Sig is doing with the P320 years ago. The American pistol came out in 2015 with an FCI. This was a lame move by Ruger. Hopefully it does better than i anticipated. Great video. I appreciate the first honest non 🐓 slupping review.
Exactly I started this TH-cam channel. Never believing it would be much of anything much less receiving 42,000 subscribers in three years for that very reason refusing to coward down to the big manufacturer that wanted to pay me to say nice things about their gun and honestly, it’s not that they Pay the reviewer but they give them a free gun and let them keep it and they sell it for profit and it’s not always that they tell you to say nice things. It’s just a given that if you’re trash yet, they won’t send you anything else. I don’t need their guns or their money I was going to buy them anyway so I’m going to say what I believe to be true. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Interesting. I think your evaluation is the most negative one I've watched. Thanks. Personally I have no current interest in another striker 9 glock clone but the modular concept is interesting. Already subscribed.
Yeah well as the new guy in the gun store said when he found out I review guns….”man that’s cool bro ima watch yours first.” What’s cool?…”that you buy your own guns to review bro the other tuber locally that comes in here would eat a turd I crapped in a napkin straight off the floor in front of everyone if there was $20 in it for him.” You can’t be bought because you bought it so it can’t be anything but unbiased
@@GSquaredTactical true, but my statement was simply one of fact. I have no idea of the interest or possible bias of any reviewer. Thanks.
Fair enough
I went to my LGS yesterday as they got them in. Was intrigued initially when I seen the first reviews but after seeing and holding the RXM, nothing special or "most have" variant of a Glock Clone. I was really wanting to like this new clone but a hard pass for me. Went and bought me a Radian Ramjet and Afterburner for my P365 instead, think that was a better investment on my side.
Some will like it and that is fine, just not something that tickled my fancy.
That’s what I’ve been saying, all along half of the people that will dog me for what I had to say about it has not even held one probably not even seen one and certainly probably does not even own one. They just watched other reviews from people that was given the gun and/or trying to impress Ruger so they can get something for free And that makes them feel good about themselves because they’re Ruger fan boys and they don’t want to hear anything negative about it. Thanks for watching and for commenting and be sure to subscribe if you have not already
@@GSquaredTactical I personally love your reviews. As I said, I watched several and it had me intrigued. But in the end, when I actually got to handle it, it just is another Glock clone that others have done already, with the exception maybe of the serialized trigger assembly. I like Ruger revolvers but not a fan of their semiautomatic line of handguns. And I also agree that Ruger is a bit late to the game with another clone gun, and for a big name manufacturer, come up with something that is yours and not just a copy. Keep it up brother, haters gonna hate but in the end, honest reviews is what I like, if it is a good gun, great, if it sucks, I want to know. This one, even though I did not shoot it, just is nothing special that I need to fill a square, I will stick with my Sigs, Springfields and Caniks that fill this space.
Yes sir I just wish others agreed I’d be a lot bigger
I have 2 just because.
Well whatever works for you that’s great. Thanks for watching and for commenting and be sure to subscribe if you have not already.
Finally someone actually paid for this POS gun. I own one of these. The trigger is garbage, grip sucks, (actually got slide bite).
It just sits in the range bag until I upgrade the trigger and grip frame. Hoping they take the Echelon approach with various sizes. It’s a disappointment though waste of money. But at least it fits holsters I already have.
Makes a difference when you spend your own money doesn’t it. I wish more people would subscribe and watch my videos instead of wetting their pants over other free gun tubers because they want to believe their favorite brand is the best. Ruger crapped the bed on this one.
It just looks cheap to me not as bad as a high point but just looks cheap. I don’t care what people say, You get what you pay for.
Yeah, that’s because it is made very cheaply. The same day I bought a Bul Armory Axe that was $51 cheaper and although it’s not optic ready and does not have a front site is built like a tank in comparison to this one and shoots way way better.
Steyr was the first to come out with a modular removable chassis. They even sued sig for patent infringement. I love Glocks but who cares about another Glock rip off.
Thanks for that info and yes I agree. Thanks for watching him for commenting and be sure to subscribe if you have not already.
Mine never had issues out of the box put a viridian sro style dot on and radian ramjet afterburner and armament guide rod and spring and have shot over 300 rounds flawless and I have tiny hand syndrome check it out on my page and it’s Glock gen 3 part compatible so change what you want
Nice
Positive comment deleted. Would love to know if deleted by the channel or YT.
I don’t delete any comments only some viewers all together so if you aren’t hidden from the channel which obviously you are not then it wasn’t me who deleted your comment sir!! What was the positive comment?
@@GSquaredTactical I like the format and honesty of your reviews. Based on your response - thank you - must have been YT, human or algorithm.
Ty sir
Great video one of my 1st guns was a ruger p95
Ruger is a great American company that should have kept a new release original and made it their own.
"I'd say this will be more reliable than a Sig(not a high bar) while only costing about a third of what some Sigs do. You're getting a gen 3 Glock with an FCU for the price of a Taurus G3, and your only real complaints are nitpicks. You kinda come off like an old fud who don't care about what the young hipsters are doing with guns these days. You also complain about an American company not using an American design, but American, foreign stuff bad, but you have an el-cheapo Chinesium optic on the gun...you're wearing a hoodie with an Israeli company on it, and driving a vehicle made by an Italian owned company. Your high horse is looking like a jenga tower...
Personally can't wait for the pdw chassis using this FCU and Glock accessories. And there is a good chance magpul will be offering one. meaning quality at a reasonable price."
We will see what happens. Thanks for watching and commenting and be sure to subscribe if you haven’t already
Mine never had issues out of the box put a viridian sro style dot on and radian ramjet afterburner and armament guide rod and spring and have shot over 300 rounds flawless and I have tiny hand syndrome check it out on my page
Will do
Easy lighting. It's not a top tier pistol. It's a $400 budget pistol . I think it will fit the needs of the average Joe .
Yeah, I spent $350 on a Bul Armory Axe that will shoot circles around this thing and built like a tank in comparison into this Lego. Same can be said about the XD mod3. With Guns like that out there $400 is not necessarily budget especially for this toy.
Interesting video but a gen 3 glock fcu is new and given all the glock interest it has value but fair point maybe nit for another brand like Ruger.
Yeah man not an established American brand come on Ruger
Guy doesn't get it.
Are Glock clones getting tiring? Yes, absolutely. But Glocks are getting tiring, overpriced, and outdated. Modern buyers want modern features, future-proofing, and not just safety/reliability. Until now, with the RXM, no gun has offered all three while also being reasonably priced. Let's go over it.
By "modern features," I mean a well-thought-out optics mounting system since these days, if you're not running a red dot, you're living in the past. The Glock MOS is a joke. Custom-cut slides are an overpriced hassle that usually results in a commitment to a single optic or a lack of ability to hold zero. Sig and the RXM are the only platforms worth a damn for this.
For future proofing, I mean a swappable FCU or chassis system so the user can adapt a single firearm to cover a broader range of roles. This is why the AR platform is so popular. Glock might be working on this, but the clock is ticking. Right now, it's just Sig, again, and Zev that offer these features. We'll come back to Zev.
Nothing mentioned above beats the old Gen 3 Glock platform in terms of safety and reliability. Sig is still teething through its drop-safe issues and dealing with surface rust. Woof.
This just about leaves us with the Zev OZ9 and this new RXM. Zev does not have a mounting system as well developed as Ruger's, which is genius. I do, however, appreciate your insights about the loaded chamber indicator cutaway. You made an excellent point. It's too bad that nobody makes Gen 3 aftermarket barrels without it (that's sarcasm). Something else Zev needs to have that Ruger does is the mass production infrastructure to churn these little bits of freedom out at a reasonable price. Forget reliability: Zev wants $1,500.00 for their Glonk, while the RXM retails for $500 and under if you're lucky enough to live in the middle of nowhere. So if you go with the Ruger, you're supporting an entirely stateside American company without a pompous attitude that wants to put as many of the most reliable, safe, feature-rich weapons in as many Americans' hands as possible, regardless of economic status.
It's embarrassing that you couldn't see this. Sure, there's a high chance we'll see some gremlins pop up over the next few years as we do with any new gun, but starting with a proven platform will help offset and minimize them. You're welcome for the comment. Gobbless.
Great comment!
🤣🤣🤣🤣🤣🤣🤣🤣🤣
Yeah a bunch of fan boys that can’t accept that Ruger continues the tradition of making great rifles and revolvers but continues to make ugly low quality polymer semis and this one isn’t any different. Everyone talking the smack probably hasn’t even held one lol. Wipe the Cheeto stains off your keyboard because obviously you sitting in a beanbag chair next to a PlayStation typing up a novel. ✌️
👍🏻😏
@@GSquaredTactical Magpul is making the polymer on this one pops. Ruger is just beating Glock at their own game. Ruger continues to provide high value pistols at a low price point while you spout ignorant outdated opinions at people who know more and shoot better than you do.
Echelon compact is better but SIG fuse is the best.
Bro video was up 2-1/2 minutes and you already talking about the fuse 😂🤣😂. Video is 23 minutes long. Come on bro did you watch the video? Man you on that Fuse aren’t you? Do you own the Fuse
👍🏻🤣
😂😂😂
@@GSquaredTactical Ha Ha Okay. I'm done whining about fuse.
you act like glock was innovative. quite frankly - there hasnt been innovation in 100 years.
True
God Bless🙏🏻 Thanks for the review! Always liked the Glock but not a fan or the grip angle. I’m a 1911 guy!
Yessir
Yup
You got a lot of hate about your Jeep. I’m not a fan either but it is your choice! Screw the haters!
My Jeep has brought me a lot of joy and got me out of a lot of tight spots. I wasn’t a fan when I initially bought it I drive a 2022 3500 Duramax the jeep is my wife’s
@ cool Jeep is not the same as the old days. Cool but build quality is lacking. Not like the old days. I’m an old guy so I remember when they were super cool.
Wow ok
Ok
@ something about the gun never sparked my interest in the first place and to hear what I already thought in your review. Let me know how accurate I was just from a glance that’s all big brother.
Yessir
I'll keep my XD mod 3 over this all day.
Ew.
For sure XD Mod 3 is head shoulders and more heads better than any Ruger polymer
@ Good ole Croatian polymer imported by a company that donates money to anti gun legislators and has extractors, grip safeties, and trigger bars that constantly fail, over American Magpul polymer and a sturdy Glock design manufactured by Ruger? No thanks.
@@Godscaliber1911 They fired the 2 people that where anti gun and your sticking up for a Austria copy.
@@CloyceSpears Why would I care if it's an Austria copy? It works and it's successful. The AK is a copy of the Garand gas system. Almost every modern machinegun in some way copies the MG42, and how many copies are there of the 1911, CZ-75, or Ar-15? How many handgun designs copy the browning locking breech? Like it or not, Glock got the design for a simple inexpensive polymer pistol right; and it's about time we're getting some value options from large reputable American brands like Ruger and Magpul.
I agree with everything he said on this video. The critiques of the gun and the dig on Ruger! that is embarrassing. They should be ashamed of themselves. When you have to make a Glock clone, you're Admitting defeat
Is every major gun company that makes a 1911 admitting defeat? Is every major gun company that makes an AR admitting defeat? Every 1911 that is not a Colt or a military issues is a clone. Every AR that is not an Armalite or Colt is a clone. You have to realize that Glock is not simply it's own brand anymore. Glock is a platform now, just like a 1911 or an AR.
@mikevaquero3766 well said brother! Glock is definitely a platform that other manufacturers can build on. Ruger did a great job by making an affordable gun that the average Joe can afford to buy so they can use for ccw with modern upgrades like the optic system, and trigger. I honestly don't understand all the hate! Not everyone may like it, but they don't have to like it, a lot of other people will!
Couldn't disagree more. This was a smart move by Ruger and Magpul and my guess is this will sell really well. I'm all for any new gun that uses cheap Glock mags. Glock OEM mags are roughly 1/3 of the price of virtually every other gun maker like Sig, Smith and Wesson and Springfield if you look in the right places.
@quoththeraven7 absolutely I’m not hating on Ruger. I’m just disappointed as long as I have wished they would change their ugly lackluster, polymer handguns, and then they do this
OK, so they cloned a competitor for the Almighty dollar that makes me think even less of them and it’s OK if you disagree because I disagree with you disagreeing lol 😂
No way this is a $500 (495) gun. This is $295 at best. I'm not picking this over a slightly used g19 for $299
No way you are right. Thanks for watching it for commenting and be sure to subscribe if you have not already.
I think the best Glock clone is the grit grips gg19 awesome company and phenomenal customer service
I will check them out. Thanks for watching and commenting and be sure to subscribe if you haven’t already