I have watched a lot of different tutorials and many are very good. What I like about this one, is you smoothly transitioned from each step and explained why you are doing what you are doing! I found this excellent. And..... there is nothing wrong with learning something knew no matter how many years you have been riding. 30+ YEARS for me and still learning something new! Thanks bro!
My kind of service tech. You can work on my bike anyway. Like how you do the little extras that most service guys neglect to do. Thanks for the great video of how to adjust the throttle cables the correct way. Great channel I look forward to seeing what you're working on next.
finally had a day off,started my 06 RK Carlini upgrade got all the way to the throttle/idle cables and totally could not remember the cable orientation at the hand grips your video is so well recorded showed me exactly what I needed just wanted to say..thank you.
Thanks best throttle adjusting walkthrough I have seen. I have tried several times to get mine right on my 2000 Softail FLSTC Heritage. I always did it lIke I did on my carb Harleys, but it was like I was missing something. I think the combination of using the /2” ext to hold open the throttle combined with the holding the fork straight then left and right is my issue. I’m going through it tomorrow and I will drop you a comment if successful. Thanks you got a new subscriber. Thanks Dave C
Hey Mr church thanks for the info however I believe I have to start from o again it was a bit frustrating to put everything back together on my 03 1100 Shadow Sabre but I enjoy wrenching and fixing things myself with the limited knowledge I have the manual held a lot when I’m stuck but not much illustration on cable adjustment I have beyond free play throttle and your video reaffirms I need to redo it step by step with the same patience you displayed thanks again psi I have the attitude that nothing mechanical can never intimidate me or discourage me 😊
I've been riding Harleys for over 60 years starting with panheads. I've never once adjusted or lubed a throttle cable on any of them. The things you don;t know about. One more regular maintenance thing to add to the list. sigh... :)
Great video! I have a question though. At the 12:48 mark you point out which cable is the idle cable, and say that you're going to adjust it. A couple seconds later the camera cuts off and then at 12:56 you say that the idle cable was adjusted, but it's not clear what work you did. Is that just taking up excess slack / movement in the possible fore-aft rotation of the throttle?
@@norsemencustomcycles7289 Thank you for making it I always like to learn more you can never learn too much. I shared your vid with a few friends who were having cable adjustment problems on their high apes. I will have to check and see what other videos you have. Currently working on dialing in a 00 Softail Standard I re jetted trying to find the happy medium of not too rich yet not too lean. Your the third person I have ever seen who know that cardboard trick right on.
Is the procedure on a fuel injection bike much different? I have a 1999 FLHRCI . Any vids on this model would be appreciated. Learning a lot from your videos!
My throttle is starting to stick. I've followed your video and found i had a kink in the idle cable. Can I personally bend it back to just better off replacing it?
I have a 2007 FLHTCU Harley with sidecar.i have a problem with my oil pressure,light works but the gauge does not work.the gauge has been tested out and is good. also engine oil pressure tested and is to Harley spec's .
now i installed a new cable to tight and after a few months it broke. so the next one i made it loose after wide open up... very important that it will break off...
This is the BEST explanation of the procedure by far. Been fighting with those on a fatboy and could not figure it out by the manual. Thank you.
I have watched a lot of different tutorials and many are very good. What I like about this one, is you smoothly transitioned from each step and explained why you are doing what you are doing! I found this excellent. And..... there is nothing wrong with learning something knew no matter how many years you have been riding. 30+ YEARS for me and still learning something new! Thanks bro!
My kind of service tech. You can work on my bike anyway. Like how you do the little extras that most service guys neglect to do. Thanks for the great video of how to adjust the throttle cables the correct way. Great channel I look forward to seeing what you're working on next.
One of the best tutorial videos I've ever watched concerning the throttle cables! Appreciate you putting the time in to make them. Much respect!
Thank you so much! I really appreciate that! Glad it was helpful to someone!
Thank you for explaining the correct way to adjust throttle cables .
finally had a day off,started my 06 RK Carlini upgrade got all the way to the throttle/idle cables and totally could not remember the cable orientation at the hand grips your video is so well recorded showed me exactly what I needed just wanted to say..thank you.
Damn! Thanks man! Honestly comments like this is what makes me want to put out more videos!
Thanks best throttle adjusting walkthrough I have seen. I have tried several times to get mine right on my 2000 Softail FLSTC Heritage. I always did it lIke I did on my carb Harleys, but it was like I was missing something. I think the combination of using the /2” ext to hold open the throttle combined with the holding the fork straight then left and right is my issue. I’m going through it tomorrow and I will drop you a comment if successful. Thanks you got a new subscriber.
Thanks Dave C
Awesome! Glad you found it useful! Let me know how it goes for sure. Feel free to message me directly if you cant seem to get it right still.
Thank you I learned an awful lot. I just got a new bike and I don’t know much about the Harley. Thank you.
I couldn't get the snap back on the throttle until I stuck the extension into the intake. good trick.
Thank you! Glad you found it helpful!
Thanks brother! Working through cables with a 98’ honda shadow and this video is really coming in handy
Thanks for The Video ! Going out to adjust my cables on My Softail Deuce !
Just what I was looking for. Thanks.
Hey Mr church thanks for the info however I believe I have to start from o again it was a bit frustrating to put everything back together on my 03 1100 Shadow Sabre but I enjoy wrenching and fixing things myself with the limited knowledge I have the manual held a lot when I’m stuck but not much illustration on cable adjustment I have beyond free play throttle and your video reaffirms I need to redo it step by step with the same patience you displayed thanks again psi I have the attitude that nothing mechanical can never intimidate me or discourage me 😊
Information that was really needed. Thank you so very much
Great video, helped me out.
Good stuff, brother! You helped a total noob not lose his shit, well some of it, installing new cables last night.
Great job, love your vids, keep em comin!
Thanks! So clear able to translate info to different project than HD.
I really appreciated the little trick with the 1/2 drive extension my cables dont have as much slack as most videos show
Hell yeah! Im glad you found it helpful! If you ever have any questions about anything I do in the videos feel free to ask me! Im here to help!
Another thing nobody mentions is the housing for the return is larger than the trottle
Forgot about the brake switch till i saw the video..thanks
Thanks going to install new cables on 2006 fatboy will help a lot.
Very informative, as usual. Nice job.
Glad you liked it!
You are the man GREAT TIPS TY
Thanks man excellently done.
Plain and simple to understand ❤
I've been riding Harleys for over 60 years starting with panheads. I've never once adjusted or lubed a throttle cable on any of them. The things you don;t know about. One more regular maintenance thing to add to the list. sigh... :)
Very informative, as usual. Thank you.
Our pleasure!
Good teaching skills. Thanks
Nice bike. Keep the videos coming. Great job.
More to come!
Absolutely awesome. Thanks dude!!!
That helps me alot. Thank you
Feeding the Al Gore Rhythms!😉
Outstanding, thank you.
Straight forward tutorial 👌
Very thorough!
Great video! I have a question though. At the 12:48 mark you point out which cable is the idle cable, and say that you're going to adjust it. A couple seconds later the camera cuts off and then at 12:56 you say that the idle cable was adjusted, but it's not clear what work you did. Is that just taking up excess slack / movement in the possible fore-aft rotation of the throttle?
Best how to service and adjust throttle cables. Thank you man.
No worries at all man. My pleasure. Glad you found it useful!
@@norsemencustomcycles7289 Thank you for making it I always like to learn more you can never learn too much. I shared your vid with a few friends who were having cable adjustment problems on their high apes. I will have to check and see what other videos you have. Currently working on dialing in a 00 Softail Standard I re jetted trying to find the happy medium of not too rich yet not too lean. Your the third person I have ever seen who know that cardboard trick right on.
Great imfo 👍 good video 👀😎
Thank man very informative 🤙🏼
Is the procedure on a fuel injection bike much different? I have a 1999 FLHRCI . Any vids on this model would be appreciated. Learning a lot from your videos!
As far as the throttle cables go, yes. Adjusting the idle is a little diffrent though.
My throttle is starting to stick. I've followed your video and found i had a kink in the idle cable.
Can I personally bend it back to just better off replacing it?
I have a 2007 FLHTCU Harley with sidecar.i have a problem with my oil pressure,light works but the gauge does not work.the gauge has been tested out and is good. also engine oil pressure tested and is to Harley spec's .
Great vid
Nice. Thanks man
Thank you 😊
Super helpful
nice work now my turn to do mine tks
Thank you
very good video....Norsemen....thanks.....canada
Any vrod work mate?
so how do you adjust throttle and return cables
Do I have to disconnect the battery to do this?
Of course! That's always the first step 😎
now i installed a new cable to tight and after a few months it broke. so the next one i made it loose after wide open up... very important that it will break off...
Thanks
you should of showen the return cable adjustment
Good jod
Banana