Easily one of the best Instructional videos I’ve ever seen. And I’ve seen A LOT throughout my time. Short, sweet, to the point, and covered everything. Awesome video man, thanks for the help!
Cannot thank you enough for making this video!! By far, your video is the clearest one on TH-cam explaining the touches of throttle and return ledges. Your tutorial is simple, clear & concise. Here is what happened : I put bar risers making my cables ended up too tense and the throttle became very sticky. My local dealer said I need to get a pair of new cables and it costs me around 250 dollars. Plus, I need to leave my bike with him for one week because of all the cable measurements, swapping and adjustments. Thanks a lot !!!! You have a good one !!
Thanks so much for the video! I was having too much play before the throttle opened up. Can't wait to go home and adjust it. Your videos are amazing bud!
Hey dude. This saved my ass today. I was ankle deep in tension issues with the throttle, and not even the HD dealership could explain it as well as you did. Thanks for passing on your knowledge, as well as keeping me safe on the roads.
Have had my original throttle cables for 20 years on my sportster. This weekend it broke for the first time.I ve never lubricated anything. But like your videos!
Very good video. I am a new rider and I just noticed that my 2022 Harley XL883N Iron 883 has way too much free play in the throttle. My bike has very low mileage on it also. It only had 1200 km on it when I bought it from the dealership so maybe the throttle was never adjusted before, I am not really sure. When I roll on the throttle there is a lot of free play until the throttle actually opens up to tension. I also noticed this as when I am upshifting to a higher gear when I roll back on the throttle, it takes a bit for my bike to respond to the acceleration of upshifting thus the shifts are not smooth because of the lag response of the throttle.
Hi Tony's Garage your video is very good! I from to Brazil and I have one sportster 1200. My bike has a problem or balance. Do you have a video that changes the balance? Sorry, but my english is terrible.
I was wondering if you could help. My throttle cable is max adjusted and even if I run out of threads my throttle doesn't open 100% are my cables stretches
Tony's Garage hi watched your video on adjusting the throttle cable on the Sportsters I have a question for you I own a 97 883 hugger Sportster CV 40mm carb now on this type of carb routing the throttle and I del cable's would I route the throttle cable to the front side of the butterfly cam and the Idea cable to the rear side of the cam?
I just got a 2018 Sportster custom XL 1200. My idling app is very high and even without applying throttle the engine races. How can I reduce the idle so that the bike goes slow when not applying thro?
Hey Tony, I want to get magnum cable as well. I have I 8 inch bars, I want to replace all the wiring, would you be able to help select which options are needed?
nice vid but i do believe you do not put the lube tube in the hole in the top the lube hole is on the side opposite the tightening screw the hole on the top is for holding the rubber insert in place at least it is on the one i have in the uk.
I installed a stage 1on my sporste. I was an idiot and fiddles with throttle body flap when i had the air cleaner off. When i started my bike up with the vance and hines fp3 it gave me a throttle position sensor too low and i can smell my bike running rich. will this help me reset my throttle and fix that issue? Thanks for any tips or advic.
Hey Tony, I hope you are okay. I'm new on this, got a question! Both cables need to be lubricated is it? Or only the front one that opens the butterfly? You made me that confident to do this, and go a head with my bike 😅
6 years late but great video man. great explanations and how to.
So far this is the best video I've seen on how to adjust the throttle cables. Thanks a million !
Easily one of the best Instructional videos I’ve ever seen. And I’ve seen A LOT throughout my time. Short, sweet, to the point, and covered everything. Awesome video man, thanks for the help!
Cannot thank you enough for making this video!! By far, your video is the clearest one on TH-cam explaining the touches of throttle and return ledges. Your tutorial is simple, clear & concise.
Here is what happened : I put bar risers making my cables ended up too tense and the throttle became very sticky. My local dealer said I need to get a pair of new cables and it costs me around 250 dollars. Plus, I need to leave my bike with him for one week because of all the cable measurements, swapping and adjustments.
Thanks a lot !!!! You have a good one !!
Thank you for this thorough guide - Been wanting to adjust my cables for some time and you just inspired me to go with it
Just got my first Harley. A 2007 Sportster Custom 1200. Thank you for these videos. New subscriber.
Thanks so much for the video! I was having too much play before the throttle opened up. Can't wait to go home and adjust it. Your videos are amazing bud!
Glad it helped! Thanks for watching!
Hey dude. This saved my ass today. I was ankle deep in tension issues with the throttle, and not even the HD dealership could explain it as well as you did. Thanks for passing on your knowledge, as well as keeping me safe on the roads.
Glad it helped👊👊👊
What a great, clear video that explains how everything works. This is probably one of my favorite car/bike maintenance videos I’ve ever watched.
Watching in 2024. Ty so much for this vid
Thanks. Much easier to follow than the Clymer manual...
Have had my original throttle cables for 20 years on my sportster. This weekend it broke for the first time.I ve never lubricated anything. But like your videos!
Thanks for watching👊
Thank you for posting this video! Very good instructions. God bless in Jesus' name.
Glad it was helpful.
Thanks, good video instruction, great for changing grips.
You’re video helped me adjust new cables. Thanks man!
Glad it helped👊👊
Very helpful. Great video. Thanks.
Dude these videos are on point!! Excellent series so far!!
+RideWithGonk Thanks Gonk! Hopefully I can get the auto focus to work better on the next one.:)
Thank you Tony, much appreciated.
Damn bro , great video . Very easy to understand and right to the point . Thank you!
Dude I love your videos keep the info coming brothuuuurr
Good stuff, thank you sir
Great video that’s helped me out with adjusting my cables. Thank you 🙏
Very good video. I am a new rider and I just noticed that my 2022 Harley XL883N Iron 883 has way too much free play in the throttle. My bike has very low mileage on it also. It only had 1200 km on it when I bought it from the dealership so maybe the throttle was never adjusted before, I am not really sure. When I roll on the throttle there is a lot of free play until the throttle actually opens up to tension. I also noticed this as when I am upshifting to a higher gear when I roll back on the throttle, it takes a bit for my bike to respond to the acceleration of upshifting thus the shifts are not smooth because of the lag response of the throttle.
Very good/informative 👍🏼
Will be adjusting my throttle cable today. Thank you !!
Glad it was helpful. Thanks for watching ride safe
Can you do a video on how to replace a clutch safety interlock switch? I broke that piece when trying to replace grips
This was extremely helpful. Thank you!
Thank for watching!!! Ride safe.
You sound alot like Bill Pullman. True lies lol. Thnx again bro
Your video's are so clear and concise. Keep them coming, much appreciated :)
Thanks, glad they are helpful
Very informative. Nice video !
Glad it helped Geno. Thanks for watching and ride safe.
Hi Tony's Garage your video is very good! I from to Brazil and I have one sportster 1200. My bike has a problem or balance. Do you have a video that changes the balance? Sorry, but my english is terrible.
Glad the videos are helpful. I am not sure what you mean by “balance”.
Thanks for the video
Thanks for watching👊👊👊
What is the star like dial between throttle and return/idle cables under housing?
You deserve way more subs these videos are extremely helpfull
Thank you, only about 5 months in hopefully the suns will come. Thanks subscribing.
Thanks for the help!
this is very good. gives me confidence to do this. nice.
Thanks, hope it helps
Very clear instruction👍🏻
Thank you.
I was wondering if you could help. My throttle cable is max adjusted and even if I run out of threads my throttle doesn't open 100% are my cables stretches
Some explain how to adjust or use that star looking screw adjuster between the two cables... Thanks.
Tony's Garage hi watched your video on adjusting the throttle cable on the Sportsters I have a question for you I own a 97 883 hugger Sportster CV 40mm carb now on this type of carb routing the throttle and I del cable's would I route the throttle cable to the front side of the butterfly cam and the Idea cable to the rear side of the cam?
Throttle cable will always pull the throttle open. More than likely it is the frontside. Hope this helps thanks for watching and ride safe.
Thanks Tony
Thank you, another great and informative video
Thanks for watching👊👊
Great Help. Good video . Good Teacher.
Thanks, glad it was helpful.
I just got a 2018 Sportster custom XL 1200. My idling app is very high and even without applying throttle the engine races. How can I reduce the idle so that the bike goes slow when not applying thro?
Another great video!
+Jeffrey Swiggett thanks
Thanks bro i brok my idle cable and i was just goin to order a throttle cable i thought they where the same ill order an idle cable now
Glad it was helpful. Thanks for watching!
Hey Tony, I want to get magnum cable as well. I have I
8 inch bars, I want to replace all the wiring, would you be able to help select which options are needed?
It has been a few years since I purchased those. Let me see if I can dig up some old invoices
@@TonysGarage thank you🙇
Great lesson man. Thanks!
Glad it was helpful!! Thanks for watching and ride safe.
appriciate the video, just a suggestion, maybe have someone operate the camera, it's hard to see what you're doing sometimes.
nice vid but i do believe you do not put the lube tube in the hole in the top the lube hole is on the side opposite the tightening screw the hole on the top is for holding the rubber insert in place at least it is on the one i have in the uk.
Great freaking video man. 👍🏻
Thanks for watching 👊👊
I installed a stage 1on my sporste. I was an idiot and fiddles with throttle body flap when i had the air cleaner off. When i started my bike up with the vance and hines fp3 it gave me a throttle position sensor too low and i can smell my bike running rich. will this help me reset my throttle and fix that issue? Thanks for any tips or advic.
I would give Venice and Hines a call for a recommendation. They are very helpful with situations like this. Ride safe.
@@TonysGarage i got it foxed myself i was making it out to be bigger than it was lol but thanks.
Thanks so much! Super helpful
Glad it was useful!
Great video. Thanks!
Thanks for watching
Mucho gracias Amigo, throttle cable loose and has play at entrance to housing
so how do you adjust the throttle cable and return
Hey Tony, I hope you are okay.
I'm new on this, got a question! Both cables need to be lubricated is it? Or only the front one that opens the butterfly? You made me that confident to do this, and go a head with my bike 😅
Both cables need to be lubed. Thanks for watching👊
@@TonysGarage Thanks a lot. 🤘🏼
Great video, subscribed.
Thanks for watching!!! Thanks for the sub
Do you have a video how to but on a longer cable kit
I’m not sure what mean?
@@TonysGarage He want's Ape Hangers.
i cant thank you enough
Glad it helped👊👊👊
Thanks mate.
Glad it helped!
Awesome thanks.
Glad is was helpful! Thanks for watching.
@@TonysGarage went on a group ride and my shit kept sticking at 10%, you saved me a ton of cash. Do you got merch?
@@willx1987x working on it now should have some in the next couple of weeks .
Do you have too lube both cables?
Yes maam
I swapped grips and didn’t adjust anything, now my bike won’t start unless in neutral, is it because I didn’t adjust the cables?
Check the clutch pressure switch.
Thank you thank you thank you LOL
Subbed!
Thanks for watching and the sub Eric👊👊
Cool,know I know which one is throttle
I know, I got a little excited there. With all the different views I just wanted to be clear.
Tony's Garage all the views are great,now I know difference between the two
My stock adjustement nuts, ust wont move. It is driving me crazy.
Try some heat and pb blaster.
Now I SEE
We really need to drop our wrench like that ?
Or... you can count the threads and put both of them back where you had them to begin with.
Saving me 800.00
Tbh, there’s a lot of talking and you still don’t clearly show how to adjust it.
Excellent video thanks!
Great video, thanks.