Ulanzi Just Made a NEW Carbon Fibre Video Tripod!

แชร์
ฝัง
  • เผยแพร่เมื่อ 29 ส.ค. 2024

ความคิดเห็น • 20

  • @ulanzi
    @ulanzi 10 หลายเดือนก่อน +4

    Thank you for the deep review! :D

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  10 หลายเดือนก่อน

      You're welcome! Thanks for sending out the Tripod! :)

  • @benjocabarro
    @benjocabarro 10 หลายเดือนก่อน +1

    Hi Shane, wanted to ask if you fully tighten the pan or tilt lock screws, is the videohead securely locked in or does it still pan or tilt if you try to force it to move?

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  10 หลายเดือนก่อน

      Hi Ben. It locks in really well but if you forced it really hard it does move. It won't move much unless you were really pushing on it hard. The other one I talked about (F38) - has a non-video head you can lock in a lot more.

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  10 หลายเดือนก่อน

      I was talking about the actual video head in my prior reply. The part that sits into the base locks in great, and I can't get that to move at all. (the silver clip at the front that sits horizontally)

  • @nuzusecam
    @nuzusecam หลายเดือนก่อน

    Have u tried the coman zero? Which one is better?

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  หลายเดือนก่อน

      The Zero is better build quality, but both have fine for what I do in regular shooting scenarios.

  • @mystic_alchemist
    @mystic_alchemist 9 หลายเดือนก่อน

    Is this the best compact video tripod? Like the peak design for photography.

    • @pitzkale
      @pitzkale 8 หลายเดือนก่อน

      My Ulanzi video go tripod broke on first use. It's made of the most terrible materials.

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  8 หลายเดือนก่อน

      Did you return it? Mines been hammered the last few weeks and it's been working great.

    • @pitzkale
      @pitzkale 8 หลายเดือนก่อน +1

      @@GeekyNerdyTechy they are not very responsive. I'm still stuck with a broken tripod and no refund. I emailed Ulanzi directly and the seller and nothing.

  • @pitzkale
    @pitzkale 8 หลายเดือนก่อน

    I just got the Video Go tripod and it was a terrible mistake.
    Middle column got stuck on first full extension with a small piece of plastic falling out, and then when I tried to open the legs for access to the column one of them SNAPPED CLEAN OFF with no force applied. I don't know what it's made of but that's NOT ~$250 worth of materials.
    On paper it's near perfect. In reality absolutely terrible QC.
    My Peak Design tripod may have cost more and doesn't have the f38 system, but it's been through hell and not a scratch!
    It also feels wayyyyy more robust in the hand just handling it.

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  8 หลายเดือนก่อน

      That's not good. Send it back for a refund/swap. Mine has been going strong, sorry to hear that. If it was crap or damaged I would have mentioned it in the video, but it's been great so far.

  • @3Five2Guy
    @3Five2Guy 5 หลายเดือนก่อน

    Dumb question.......but is this compatible with osmo pocket 3??

    • @GeekyNerdyTechy
      @GeekyNerdyTechy  5 หลายเดือนก่อน +1

      If there's a tripod mount at the base of the unit yes. They keep the mounting points the same. I don't have an osmo pocket 3 yet, but just check the manual or see if there's a tripod hole.

    • @3Five2Guy
      @3Five2Guy 5 หลายเดือนก่อน

      @@GeekyNerdyTechy grateful thank you!

  • @aldolega
    @aldolega 10 หลายเดือนก่อน

    There's no need to shoot your closeups so shallow. Stop down a bit and let the viewer actually see what youre talking about.

    • @GalZiv
      @GalZiv 7 หลายเดือนก่อน

      are you bored? don't have any other smart note to say?

    • @aldolega
      @aldolega 7 หลายเดือนก่อน

      @@GalZiv Wasn't bored at all until I read your comment.

    • @GalZiv
      @GalZiv 7 หลายเดือนก่อน +1

      ye I can see, otherwise you wouldn't reply 😜@@aldolega