How to Remove 3M Tape and Trim Pieces from Car (Vortex Generator Delete)

แชร์
ฝัง
  • เผยแพร่เมื่อ 6 พ.ย. 2024

ความคิดเห็น • 131

  • @bluehydro88
    @bluehydro88 3 ปีที่แล้ว +42

    Dry ice would've helped you out a lot. 3m vhb is only sticky to about 0 C or 32F. Dry ice gets to -78C or -109F. Just put it on top of the part and wait a couple mins and pull off. Any remaining tape can be frozen and broken off with that panel separator. That's how we do it at our shop. No scratches or mess. Hope this helps in the future

    • @steinway325
      @steinway325 2 ปีที่แล้ว

      can you do this for a duckbill spoiler? wouldn't cooling the CFRP damage it as well? i'm afraid the clearcoat and plastic will become really brittle and get stress fractures easily when pulling off the spoiler...

    • @SylvesterPotter
      @SylvesterPotter 2 ปีที่แล้ว +6

      @@steinway325 Honestly, ...I use dental floss to cut though the tape and then I use goo gone...no scratches and comes off easy...the tape that is left can be heated along with the good gone...I would NEVER use the tool he used...

    • @steinway325
      @steinway325 2 ปีที่แล้ว

      @@SylvesterPotter that is the method i would go with as well. i've always used fishing line but dental floss is a great idea too

    • @ej5376
      @ej5376 ปีที่แล้ว

      Science right there!

    • @MichaelSeven7777
      @MichaelSeven7777 ปีที่แล้ว

      Yeah but how do you do it if it is on a vertical surface?

  • @Na1984
    @Na1984 2 หลายเดือนก่อน

    I had to remove some side skirts that me and my boyfriend installed because the 3M tape was pulling away in spots. I got 99% of the tape off my car, but need to get it off the side skirts so that I can reapply 3M tape and put them back on the car. Thank you so much for this video, I just ordered this rubber wheel from Amazon.

  • @martyisokay
    @martyisokay ปีที่แล้ว +5

    Straight and to the point. Thanks! Exactly what I was looking for. I have some large chrome plates I want to take off my truck and your video guided me in the right direction.

    • @e36ayden
      @e36ayden 11 หลายเดือนก่อน

      no way we here for the same shii lmaoooo

  • @CautionJetblast
    @CautionJetblast ปีที่แล้ว

    I had some things attached to painted surfaces on my house with 3M tape, and after using dental floss to detach them, I could not figure out how defeat the black residue without destroying paint. Tried a heat gun and lost the battle. Your recommendation of the Wonder Wheel was the game changer, and all is good now. I only wish I'd known about that device when I removed the cheesy pinstriping that came on my car a dozen years ago, where I spent hours instead of minutes removing all traces. Thank you so much for this great video.

    • @jaemaximumride
      @jaemaximumride 7 หลายเดือนก่อน

      Goo Gone works amazing as well, just apply n let it soak for a few minutes and it wipes right off

  • @aps-pictures9335
    @aps-pictures9335 5 หลายเดือนก่อน +2

    Vids like this are why I love TH-cam, cheers mate

  • @johnnysnyder4048
    @johnnysnyder4048 2 ปีที่แล้ว +1

    I’m with you. Not a fan of the vortex generator. I’d rather it be on the rear window. Not a fan on crap stuck to paint. Using 3m adhesive remover once I use fishing line. Cool vid bro. 👍🏼

  • @brandongonzalez6277
    @brandongonzalez6277 2 ปีที่แล้ว +2

    Thanks a ton! Removing aftermarker louvers from a car I just bought, was afraid of damaging the paint. Seeing you muscle that vortex generator off gives me confidence she'll be fine.

  • @jeanettefielding9201
    @jeanettefielding9201 2 ปีที่แล้ว +13

    To remove the piece of trim simply slide a length of strong nylon fishing string underneath and slide it back and forth, cutting through the tape. Straightforward and doesn't cause damage to paintwork or the trim.

    • @billbradskey7063
      @billbradskey7063 2 ปีที่แล้ว +1

      The real best method lol. Braided fishing line works best. Also eraser wheels are the shit.... just keep it moving because you CAN burn through the paint

    • @jaemaximumride
      @jaemaximumride 7 หลายเดือนก่อน

      yes he definitely did it the hard way

  • @Tenorman1100
    @Tenorman1100 2 ปีที่แล้ว +3

    Use a mono filament fishing line to "saw through" the adhesive tape. If you pull on the part you are removing you can stretch it out of shape or break it. The heat gun can distort the plastic part as well.

    • @jaemaximumride
      @jaemaximumride 7 หลายเดือนก่อน

      I removed my spoiler using twine. Worked wonders! But pretty much any thin strong durable string would work, even dental floss!

  • @JeromyBranch
    @JeromyBranch 4 หลายเดือนก่อน +7

    WD40. That's all you need. Let it soak in a few minutes and you can just wipe it off. Might take twice if it's thick. And WD 40 won't harm your paint.

  • @jzxwood
    @jzxwood 4 ปีที่แล้ว +7

    I appreciate it bro! Gotta remove my window vents on my Pontiac. They been on there awhile. Got new replacements. Hopefully the rubber wheel with do the job..

  • @CedricSatterfield
    @CedricSatterfield 3 ปีที่แล้ว

    Thanks much! This cam in very handy. I used this technique on a guitar- wood surface, to remove a custom armrest that had become cracked. Different surface, mostly the same technique. That regular double side tape that came with the armrest was not very secure and as it heats up from your arm it slides gradually down the surface of the guitar. 3M auto tape to the rescue! Except that if the overhang of the armrest becomes cracked from being bumped (my fault) you are then faced with removing the tape from a very delicate surface, also with a clearcoat. Thanks for the quick but detailed video demo of this! It saved me from spending about 150.00 at a guitar shop.

  • @briandimascio3624
    @briandimascio3624 ปีที่แล้ว +2

    Nice. I didn’t even know those erasers existed lol. Fishing line or dental floss in a ‘sawing’ motion works great on getting underneath whatever u are removing for the initial item removal part also… especially for rain guards which might crack when flexing or wings and spoilers that won’t bend and will be hard to get under with a heat gun

  • @shuvang6878
    @shuvang6878 ปีที่แล้ว

    The heat gun and finger method was what i did for like a whole hour. This product is what I need. Lol

  • @АрхитектурныйДизайн
    @АрхитектурныйДизайн 4 หลายเดือนก่อน +1

    Спасибо, очень помогли , делаю антихром, не знал чем скотч 3м снять )

  • @mcorkery
    @mcorkery 4 ปีที่แล้ว +6

    Fishing line underneath helps as well.

    • @Andreas16375
      @Andreas16375 4 ปีที่แล้ว +2

      Can i just pull it hard if i dont care about damaging the car? Looking to steal some of these ty for the video

    • @CedricSatterfield
      @CedricSatterfield 3 ปีที่แล้ว

      @@Andreas16375 you can if you are REALLY sure (are you sure?) you don't (REALLY REALLY sure?) care about the paint.

    • @azimaslam6375
      @azimaslam6375 3 ปีที่แล้ว

      I will try fishing line.. what bait you used .

  • @metaframe2k
    @metaframe2k 3 ปีที่แล้ว

    To remove 3m, any rubber attachment for a conventional drill or screwdriver is suitable. Even a rubber T bolt spacer will work for attaching the toilet barrel. And you don't need to buy any "special" attachments! You can also use a regular nippel from car camera, its end part is made of rubber.

  • @brianbowersii3115
    @brianbowersii3115 3 ปีที่แล้ว +16

    laughs at heat gun in georgia heat, also cries bc georgia heat

  • @kenmueller6029
    @kenmueller6029 2 ปีที่แล้ว

    That rubber wheel looks like it works so good

  • @therealguido987
    @therealguido987 ปีที่แล้ว

    I have vinyl roof wrap underneath mine I am assuming the wrap will lift up removing it ?

  • @merovingian688
    @merovingian688 ปีที่แล้ว

    I use a infrared heater. One I had laying around because the hair dryer wasn’t getting it done

  • @nonstopnomads1268
    @nonstopnomads1268 ปีที่แล้ว

    Braided fishing line pulled though in sawing motion works best

  • @LAdumpsterbaby
    @LAdumpsterbaby 2 ปีที่แล้ว

    Thanks man, one came on my 22 WRX and i'm not too fond of it

  • @static_Tricolor_camry
    @static_Tricolor_camry 2 ปีที่แล้ว

    I have a Spoiler King Rear window visor. I'm currently taking the old 3M tape off and it's leaving pieces of the foam tape on the back, will this pad help take the remaining stuck foam tape off. They removed my Rear window visor when I was getting a new paint job done. And Spoiler King put glue on the visor and stuck the tape onto the visor so it's harder to pull the tape off.

  • @stay4theride
    @stay4theride 3 ปีที่แล้ว +1

    I put on a AVS bug deflector on my 2019 Tundra. I did it today and realized it's not centered. It has 3M adhesive on the hood. I live in South Florida and we get a lot of heat, will it be safe to take off the bug deflector with the 3M adhesive without damaging my paint??

  • @jefferyknudsen4028
    @jefferyknudsen4028 ปีที่แล้ว

    This video was great for on the paint surface but I’m trying to clean the plastic piece to put it back on another vehicle. I used the eraser and it leaves a residue I can’t clean off. I also tried acetone and it’s still not working easily..

  • @donAKAthedonjp
    @donAKAthedonjp 4 ปีที่แล้ว

    Man, now that is a tool I need to have along with a garage! I have to be out in the elements to do some simple projects. Richmond, Va sucks sometimes.

    • @donAKAthedonjp
      @donAKAthedonjp 4 ปีที่แล้ว

      @Captain Buff The Third I was talking about the orange rubber piece he used to remove the 3M tape off the paint.

  • @rolopolo7975
    @rolopolo7975 3 ปีที่แล้ว +1

    Looks so much better.

    • @akqjtn
      @akqjtn  3 ปีที่แล้ว

      I agree

  • @christopheresquivel4169
    @christopheresquivel4169 4 ปีที่แล้ว +2

    I'm planning on getting one for my WRX

  • @antonionavarro9506
    @antonionavarro9506 4 ปีที่แล้ว +4

    I just got the tool today and it’s messing up my paint do you have a email to send you pictures I really need your help bro

    • @daveeshaaw7650
      @daveeshaaw7650 3 ปีที่แล้ว

      Same thing happened to me bro what I found to fix it was very simple, I washed my car so the rubber wheel couldn’t rub any dirt on the paint and it didn’t scratch my car

  • @JaelLo-uu3zm
    @JaelLo-uu3zm ปีที่แล้ว

    heat gun safe on glass? im place a louver on the window of my car

  • @annmariepollock1684
    @annmariepollock1684 3 ปีที่แล้ว

    Good video.....What video editing software do you use to make your videos? I am trying to learn on my own how to make videos.

  • @jac_franc
    @jac_franc 4 ปีที่แล้ว +1

    Have any idea if the eraser wheel will work on headlights? I’m trying to remove the residual 3m tape from eyelids that were on my car. Thanks!

    • @jac_franc
      @jac_franc 4 ปีที่แล้ว

      Thank you! I’ll give it a shot.

  • @mjssblazer
    @mjssblazer ปีที่แล้ว

    Instead of buying a panel removal tool, I was able to get away with using a plastic spatula from the kitchen utensil drawer. A few swipes of car wax for clean up and it was good to go.

  • @roneeshahbudgets2769
    @roneeshahbudgets2769 2 ปีที่แล้ว

    Wait so can I just use a drill gun to attach the soft sponge to remove the 3m tape?

  • @tylermartin9474
    @tylermartin9474 3 ปีที่แล้ว

    Your from the Rochester area aren’t you? Lol I saw the dealer plate haha

  • @angiethompson2370
    @angiethompson2370 3 ปีที่แล้ว

    Thanks! I have a lot of 3m foam tape all around a window that was smashed. It was holding a tarp over while i was sourcing a new window. The Decal Remover Eraser Wheel will hopefully get it removed quickly.

    • @Sanchy777
      @Sanchy777 3 ปีที่แล้ว +2

      Did it work?

  • @stevewasilow5556
    @stevewasilow5556 8 หลายเดือนก่อน

    Thanks for the tips… nice Ride btw

  • @garrettpritchett7648
    @garrettpritchett7648 3 ปีที่แล้ว

    Any word on the Scotch mount tape? It says it can be used on metal but I'm concerned that it may peel paint... any thoughts?

  • @UFOSgotme
    @UFOSgotme 2 ปีที่แล้ว

    Very nice guide,Well done!

  • @pumpkinpie7254
    @pumpkinpie7254 3 ปีที่แล้ว +3

    Good old hair dryer also works well if you enjoy your privacy before throwing away those amber medication bottles 👍

  • @NinjaKillerYoshi
    @NinjaKillerYoshi 4 ปีที่แล้ว +4

    Awesome video! I messed up mine :( the aligning part with antana and didn’t watch video prior wish I did but my question is; if I uninstall it am I able to reinstall it again? Or should I purchase another lol
    Thank you so much!

    • @phillip_83yt24
      @phillip_83yt24 3 ปีที่แล้ว +1

      Nobody replied to you so I’d say get everything off and reapply new adhesive or buy a new one since it’s probably messed up from pulling it off and it’s not straight anymore

    • @Nakaamaa
      @Nakaamaa 3 ปีที่แล้ว

      Same situation for me. My friend was doing one side and I was doing the other. He told me his side was good and I looked after I pulled the tape and it wasn’t -_- I just left it lol

  • @ronaldogarde8366
    @ronaldogarde8366 4 ปีที่แล้ว

    Thanks for ur info I just took of my side mount of my truck and can't take the 3m of so this will b vary handy

  • @amymarieclarke9210
    @amymarieclarke9210 ปีที่แล้ว

    But how do I get it off the rubber of my doors?
    I took old weathersheilds off my doors and it looks like this roof and residue but it's on rubber😢

  • @rey5design
    @rey5design 10 หลายเดือนก่อน

    Great video!

  • @hasashi38
    @hasashi38 3 ปีที่แล้ว

    I have a triangle spoiler on my triangle windows (small windows at the backseat). Can I take it off ? It is also 3M but i'm afraid to break the glass.

  • @draw0833
    @draw0833 8 หลายเดือนก่อน

    man this is my first time messing with tools but does anyone know how to fit the winder wheel attachment onto the drill itself? the drill and attachment provided in the package does not fit

  • @markphilpot4981
    @markphilpot4981 4 ปีที่แล้ว

    I’m not going on a tear because it just isn’t my place and not my car. Don’t know if this does any good anyway. Seems to me that it was shabbily installed. If they had of installed it like you did in your previous vid, this may have been a non issue, but it is tacky looking after I saw it off so who cares? Not hard to get off really based on your vid. If it isn’t of any use, good riddins! Keep your vids up dog, you got this down!

  • @nate8036
    @nate8036 3 ปีที่แล้ว +1

    I plan on buying a rear window visor/spoiler which uses 3M tape to hold. Would 3M tape actually hold the visor? I fear it will blow away in high winds or something.

    • @nate8036
      @nate8036 3 ปีที่แล้ว

      @@akqjtn thanks for the response. Why’d you end up taking it off? Any particular reason? I’m still a bit hesitant to buy it. I have a 21 Camry XSE. If you happen to know of any good places to buy one at please lmk.

  • @tranhuytuong1843
    @tranhuytuong1843 3 ปีที่แล้ว +2

    Use 3m general adhsive remover

  • @jmk2888
    @jmk2888 3 ปีที่แล้ว

    I used a steamer to remove any trim it emblems with 3M
    They Comes off clean

  • @Dee--Jay
    @Dee--Jay 4 ปีที่แล้ว +1

    When I did this, it did nothing but smear the old adhesive on the car instead of taking it off. What did I do wrong

    • @CedricSatterfield
      @CedricSatterfield 3 ปีที่แล้ว

      he DID say that the older the tape, the harder it is. Ive had this happen before. I didn't have a rubber wheel at the time, but I used rubbing compound and about 3000 grit sanding paper in extreme moderation and was able to get off a sunroof lip. I put down a new one, though, so while there was some slight discoloration from doing the above (I DID apply wax before I put down the new overhang to protect the paint again) you couldn't see it.

  • @ruddynicolas7590
    @ruddynicolas7590 3 ปีที่แล้ว

    hello, what was the 3M tape reference?

  • @turboN13
    @turboN13 6 หลายเดือนก่อน

    Excellent - many thanks

  • @dimaz927
    @dimaz927 4 ปีที่แล้ว

    Great video, quick question. If I have it applied on a car's roof that is VINYL wrapped, how would I go about removing the double side tape? I have shark fins installed, but want to remove them, the roof of the car is vinyl wrapped though...THANK YOU

    • @dimaz927
      @dimaz927 4 ปีที่แล้ว

      @@akqjtn thanks!

  • @-thecokeaddict-8640
    @-thecokeaddict-8640 4 ปีที่แล้ว +2

    I shall get the rubber wheel! Song name?

  • @khe8969
    @khe8969 2 ปีที่แล้ว

    is this 3m VHB or 3m auto tape?

  • @shaunmcinnis566
    @shaunmcinnis566 7 หลายเดือนก่อน

    My friend, use fishing line back and forth behind it. takes 5 minutes.

  • @187bootleg
    @187bootleg 2 ปีที่แล้ว

    Fishing line and heat gun 👍

  • @elenabarker4358
    @elenabarker4358 3 หลายเดือนก่อน

    Houston is so hot and humid I was able to roll off the old tape with my thumb and pull bigger pieces off slowly and carefully in big chunks.

  • @boozer0473
    @boozer0473 3 ปีที่แล้ว

    Very Helpful! Thanks!

  • @DRaKe6900
    @DRaKe6900 4 ปีที่แล้ว

    What temperature did you set the heat gun to?

  • @zulaiman5948
    @zulaiman5948 2 ปีที่แล้ว

    Any link to buy at shopee bro?

  • @djeddieo
    @djeddieo 4 หลายเดือนก่อน

    nice video!

  • @VictorVenro
    @VictorVenro 8 หลายเดือนก่อน

    Great video

  • @alfredoalvarez3426
    @alfredoalvarez3426 ปีที่แล้ว

    What is the part called on the drill?

  • @babycakes8434
    @babycakes8434 3 ปีที่แล้ว +1

    Great idea. I don't have a drill though.

  • @halfwaytobedlam3234
    @halfwaytobedlam3234 4 ปีที่แล้ว +1

    very helpful and concise cheers man

  • @ko5913
    @ko5913 4 ปีที่แล้ว

    Fire! Salute!!!

  • @bbhoustontx
    @bbhoustontx 2 ปีที่แล้ว

    thanks my brotha.

  • @c0011j
    @c0011j 2 ปีที่แล้ว

    Just bought that decal remover.... 😂 I kill my fingers every time trying to do it myself.

  • @georgesebastian6306
    @georgesebastian6306 2 ปีที่แล้ว

    Very helpful! Thanks,

  • @henryn2076
    @henryn2076 2 ปีที่แล้ว

    Eraser wheel is useful on paint without damaging, but! DO NOT use it on chrome strip! Door frame, side strip wherever, never use it on this kind of surface! Is there anybody can help me to remove the adhesive on chrome strip? My door visor left those tape there.

  • @haroldbautista133
    @haroldbautista133 3 ปีที่แล้ว +1

    will 3m tapes damage the paint? 🥺

    • @ESPonMe
      @ESPonMe 3 ปีที่แล้ว

      Not if you remove it slowly and without force, rubber wheel and then wax and buff

  • @MrDahkilla
    @MrDahkilla 2 ปีที่แล้ว

    Thank you mate!

  • @IC3N1N3
    @IC3N1N3 2 ปีที่แล้ว

    What was the wheel??

  • @A_Pt_9298
    @A_Pt_9298 4 ปีที่แล้ว

    Hmm, ok, pretty much a logical way BUT what if its on a tank on a motorbike, for instance, that you can't apply heat to? That's why I'm searching, i have heated grips, i installed them, then thought I'd start customising the panels and fairings, so i want to get the thermostat to the grips, that i stuck on the inlet panels, so i need to get it off so i paint them, but i also want to replace the tank pad as well, but obviously it's on the fuel tank and you can't really risk using any kind of heat like a hair dryer or heat gun to loosen the glue to get it off, hence he looking for a video of how and what to use to get it off...

    • @LuckyCharms777
      @LuckyCharms777 2 ปีที่แล้ว

      Dude, a blow dryer or heat gun aren’t going to ignite the fuel in your gas tank. 🤦‍♂️ 😂

  • @mk-ef9cp
    @mk-ef9cp 3 ปีที่แล้ว

    Omg this saved my poor fingers

  • @JC-hi6yi
    @JC-hi6yi 3 ปีที่แล้ว

    great video, very informative - but, ah, if that's a Subaru you don't need a whale-tail to keep it on the road...I know I owned one! Thanks for the video

  • @cbradiomizfit7562
    @cbradiomizfit7562 3 ปีที่แล้ว

    Good vid

  • @enrilleetizon7416
    @enrilleetizon7416 7 หลายเดือนก่อน

    Thanks 🤙💯

  • @keepsharpncalm
    @keepsharpncalm 8 หลายเดือนก่อน

    Prepare a heat gun and a can of WD40
    heat the surface and spray
    just wait
    dont use any tools otherwise
    they will damage your varnish

  • @Леонардо-ж2з
    @Леонардо-ж2з 4 ปีที่แล้ว

    Man if only this video came out last week, because my dumbass decided to cut off 3m with a razor blade on the window frame. My blowdryer didn’t have enough heat so it was my last resort. Luckily my new rain guards cover most of the damage...

  • @Chase_Shadow
    @Chase_Shadow 2 ปีที่แล้ว

    They look dumb u made a good choice

  • @pankajSDG
    @pankajSDG 3 ปีที่แล้ว

    Thank you

  • @Me-fv6qq
    @Me-fv6qq 3 ปีที่แล้ว

    This is what i do.......Use a old tooth brush & diesel to soak the old 3 M tape properly. Let it soak for 5 minutes or so & gently rub the soaked tape with a dry cloth & ur old 3M tape is removed.

  • @scavbus5057
    @scavbus5057 ปีที่แล้ว

    I did the thumb method and my skin got detached from the meat 😐

  • @figuresix
    @figuresix 3 ปีที่แล้ว +1

    First off you should have had heavy gloves on using heat gun, then not have to worry about burning your hands, and would have been easy to heat and pull..

    • @akqjtn
      @akqjtn  3 ปีที่แล้ว

      Good tip thanks!

  • @drift318
    @drift318 ปีที่แล้ว

    Anybody try a regular hair dryer?

  • @morloc-d5l
    @morloc-d5l 4 ปีที่แล้ว

    helpful

  • @colthoover
    @colthoover ปีที่แล้ว

    I think it would’ve looked better if it was body color

  • @GrandMaMaYT
    @GrandMaMaYT 25 วันที่ผ่านมา

    next you remove the wing

  • @jossse217
    @jossse217 3 ปีที่แล้ว

    I personally like how the vortex generator looks
    But I have to remove mine so I can get my roof wrapped

  • @tucoramirez9729
    @tucoramirez9729 2 ปีที่แล้ว

    Should have removed that spoiler,,rice!!

    • @LuckyCharms777
      @LuckyCharms777 2 ปีที่แล้ว

      You sound xenophobic. I bet you don’t call unnecessary lowrider modifications “Spanish rice”.

  • @PeterFeltersnatch852
    @PeterFeltersnatch852 ปีที่แล้ว

    Isopropyl alcohol works wonders