Spanky, A very nice job on building the foam. I am digging the blue plaid & off white. As always, Thank you for sharing your expertise & knowledge. Rick
I’m going to go take a look at those. If I get one I’ll show everyone and give you a shout out for the tip. Thanks for watching and your message. Please subscribe if you haven’t yet.
For the glue gun I use a small pancake compressor like a nail gun would use. Less than $100 at a big box store. The glue gun is from harbor freight and it’s a cheap paint gun @$15-20 and last a few years before swap it out for a new one. I’ve got 2 later videos on the channel of this seat snd the finished seat video as well. Thanks for watching and for your comments. Please subscribe and check out the latest videos on this seat.
Where do you get the fabrics you’re using and do you really need a industrial sewing machine just to do vinyl ?,. Thanks for sharing your work and tips!,.. GREATLY APPRECIATED!!
I get my supplies from wholesale supply co. Most major cities have a few and you can find others online that ship. I’ve never tried it with a small sewing machine but it would probably be hard on it. I can send you more info if your interested just message me. Thanks for watching -Spanky
Most of the time the padding is sized off the materials from the stock seating. Trying to keep it the same thickness and height. If layering use 1” or 2” foam to build your height and design. Thanks for watching
You can maybe modify the lock/pin that holds the seat from falling back. It want take much but I’ve never looked into doing this. Let me know how it goes
Good morning Young man. I have question regarding listing wires. I've watched these Bronco seat builds a few times so I know at the end the you install listing wires and hog rong them to something down on the seat frame. My question is did you hog ring listing wires to seat frame or are you just hoping you find a seat spring piece to crimp the seat cover listing hog ring to? Thanks as always.
You can add a second wire but it’s usually easy to find a spring if your seat has a spring. The listing wire is there to even the pull on the cover so the seem looks even and not pulled in areas. Hope this helps and ask more questions if needed. Good luck and thanks for your support by watching the channel
Thanks for showing us how to do it...always enjoy
Thanks buddy, thanks for watching have a great weekend
Spanky,
A very nice job on building the foam. I am digging the blue plaid & off white.
As always, Thank you for sharing your expertise & knowledge.
Rick
Thanks Rick. Great to hear from you buddy. Thanks for your always watching
Nice work.
I just upgraded my turkey cutter for a bubba fish knife. It works way smoother than the turkey cutter.
I’m going to go take a look at those. If I get one I’ll show everyone and give you a shout out for the tip. Thanks for watching and your message. Please subscribe if you haven’t yet.
thank you for sharing this video and the time it took to produce it. What type of compressor do you have to spray the glue?
For the glue gun I use a small pancake compressor like a nail gun would use. Less than $100 at a big box store. The glue gun is from harbor freight and it’s a cheap paint gun @$15-20 and last a few years before swap it out for a new one.
I’ve got 2 later videos on the channel of this seat snd the finished seat video as well. Thanks for watching and for your comments. Please subscribe and check out the latest videos on this seat.
Where do you get the fabrics you’re using and do you really need a industrial sewing machine just to do vinyl ?,. Thanks for sharing your work and tips!,.. GREATLY APPRECIATED!!
I get my supplies from wholesale supply co. Most major cities have a few and you can find others online that ship. I’ve never tried it with a small sewing machine but it would probably be hard on it. I can send you more info if your interested just message me. Thanks for watching
-Spanky
Can you list the size of each padding you used to layer them looks good thanks in advance
Most of the time the padding is sized off the materials from the stock seating. Trying to keep it the same thickness and height. If layering use 1” or 2” foam to build your height and design. Thanks for watching
Can you think of any way I can make my 69 nova bench seat recline so im not so up right
You can maybe modify the lock/pin that holds the seat from falling back. It want take much but I’ve never looked into doing this. Let me know how it goes
A Model A pickup doesn't have a lot of room in the cab. Can a foam seat be mad comfortable enough?
Yes I’ve driven 10 hours in my roadster and felt great afterwards. I show how to build that seat in a few of my videos. Thanks so much for watching
Look up my 1932 ford roadster seat build from a year or so ago. I get into detail on building it from scratch
Good morning Young man. I have question regarding listing wires.
I've watched these Bronco seat builds a few times so I know at the end the you install listing wires and hog rong them to something down on the seat frame.
My question is did you hog ring listing wires to seat frame or are you just hoping you find a seat spring piece to crimp the seat cover listing hog ring to? Thanks as always.
You can add a second wire but it’s usually easy to find a spring if your seat has a spring. The listing wire is there to even the pull on the cover so the seem looks even and not pulled in areas. Hope this helps and ask more questions if needed. Good luck and thanks for your support by watching the channel
CANT HEAR YOU!!!
Ok I’ll check on that thanks for watching
Whats the name of the site to order the fabric from
Albright upholstery supply…
Thanks for watching
-Spanky
I really like that orange and green
Yes, Volkswagen camper bus/van used it I love it also. Thanks for watching