2024 TOYOTA TACOMA WITHOUT JBL | Plug and Play Amplifier Installation

แชร์
ฝัง
  • เผยแพร่เมื่อ 31 ม.ค. 2025

ความคิดเห็น • 37

  • @side.hustle24.7
    @side.hustle24.7 2 หลายเดือนก่อน +1

    This will be a nice add on without breaking the bank on a new system. It is now on the wish list!

    • @BeatSonicUS
      @BeatSonicUS  2 หลายเดือนก่อน

      Thanks for your support!

  • @JoshBlieden
    @JoshBlieden 8 หลายเดือนก่อน +1

    thanks for the amazing video. I've notice the sound lacking a bit as i play some pretty heavy metal and i have to blast the sound to really hear it and i feel like this is going to change it completely thanks!

    • @BeatSonicUS
      @BeatSonicUS  8 หลายเดือนก่อน

      Give it a try, you’ll be surprised how much difference this small amp will make

  • @Seth-pi5gw
    @Seth-pi5gw 5 หลายเดือนก่อน +1

    Just confirming this version will work with the 2024 taco without JBL? Excited to see if this helps the bleh factory system.
    SKU: ENA-2T3

    • @BeatSonicUS
      @BeatSonicUS  5 หลายเดือนก่อน +1

      The ENA-2T3 will work with your 2024 Tacoma without JBL.

  • @luisrios4017
    @luisrios4017 หลายเดือนก่อน

    Can you put the bigger screen on a none jbl version. I wiil like to upgrade the head unit for 14 in radio

    • @BeatSonicUS
      @BeatSonicUS  หลายเดือนก่อน

      Not sure, we just upgraded the sound in this one.

  • @kennyrivera7497
    @kennyrivera7497 6 หลายเดือนก่อน +1

    It’s there any option to add a subwoofer 🔊 to those RCA ports on the amp ?

    • @BeatSonicUS
      @BeatSonicUS  6 หลายเดือนก่อน

      You will need the BH10 Speaker harness to add on a subwoofer. www.beatsonicusa.com/bh10.html

    • @nuvolari1892
      @nuvolari1892 5 หลายเดือนก่อน

      What if i want to install a under the seat subwoofer with an integrated amp? Would it still work with the Encore amp? ​@@BeatSonicUS

    • @BeatSonicUS
      @BeatSonicUS  5 หลายเดือนก่อน

      @@nuvolari1892 yes it will. You can use this harness www.beatsonicusa.com/bh10.html

  • @patrickp3693
    @patrickp3693 5 หลายเดือนก่อน +1

    On my 24 Tacoma TRD Sport with the JBL system and the EQ all at the factory position has the a rattle/vibration on the passenger side door panel. The rattle/vibration comes from the right behind part on the panel that says TRD. No its not me putting the radio too loud, so its not that. Anyone else have that problem? Haven't taken it to the dealer yet.

    • @BeatSonicUS
      @BeatSonicUS  5 หลายเดือนก่อน

      Some sound deadening should help

    • @side.hustle24.7
      @side.hustle24.7 2 หลายเดือนก่อน +1

      If you slide the plastic piece off that says "TRD", there is a screw behind it. Tighten that and your rattle will most likely go away. I had the same issue on the drivers side.

  • @myjunkinyourtrunk1872
    @myjunkinyourtrunk1872 8 หลายเดือนก่อน

    is it possible to install a dash centre speaker and a behind the seat sub woofer on this truck with your products?

    • @BeatSonicUS
      @BeatSonicUS  7 หลายเดือนก่อน

      Yes you can but we don’t offer speakers or woofers

  • @staceynoelanis.7160
    @staceynoelanis.7160 24 วันที่ผ่านมา

    So, if I later want to put in a sub or upgrade the speakers (I don't have the JBL version), is this specific unit not compatible?

    • @BeatSonicUS
      @BeatSonicUS  24 วันที่ผ่านมา +1

      You can upgrade speakers within 4~8 ohms, and if you wish to add a sub, you may use the additional BH10 with our amp. www.beatsonicusa.com/products/beat-sonic-bh10-speaker-harness-for-toyota-10-pin-connector

    • @staceynoelanis.7160
      @staceynoelanis.7160 24 วันที่ผ่านมา

      @@BeatSonicUS And this is for the model ENA-2T3?

    • @BeatSonicUS
      @BeatSonicUS  24 วันที่ผ่านมา +1

      @@staceynoelanis.7160 Yes!

    • @staceynoelanis.7160
      @staceynoelanis.7160 23 วันที่ผ่านมา

      @@BeatSonicUS Thank you!

    • @BeatSonicUS
      @BeatSonicUS  23 วันที่ผ่านมา

      @@staceynoelanis.7160 No thank you!

  • @Simbahimself13
    @Simbahimself13 4 หลายเดือนก่อน

    I have the bigger 14 inch screen but no jbl will this amp be the same for that?

    • @BeatSonicUS
      @BeatSonicUS  4 หลายเดือนก่อน

      Yes! This amplifier will still be compatible.

  • @myjunkinyourtrunk1872
    @myjunkinyourtrunk1872 6 หลายเดือนก่อน

    does this product change the audio profile at all like a dsp or does it just increase amplitude?

    • @BeatSonicUS
      @BeatSonicUS  6 หลายเดือนก่อน +1

      Factory audio profile is retained. Our amp will add more clarity, depth, bass and separation between the different instruments and vocals of the music

    • @myjunkinyourtrunk1872
      @myjunkinyourtrunk1872 6 หลายเดือนก่อน

      ​@@BeatSonicUSsome clarity and separation of instruments would be nice. Stock non jbl seems very compressed. Vocals are fine but you wont hear a kick, snare or punchy bassline.

    • @BeatSonicUS
      @BeatSonicUS  6 หลายเดือนก่อน

      @@myjunkinyourtrunk1872 let us know how you like it if you decide to give us a chance!

  • @PaulaSautu
    @PaulaSautu 2 หลายเดือนก่อน

    Any reviews from people who’ve installed this ?

    • @BeatSonicUS
      @BeatSonicUS  2 หลายเดือนก่อน

      It’s amazing

  • @craigcrawfordfitness4034
    @craigcrawfordfitness4034 3 หลายเดือนก่อน

    Can this work with 2022 model ??

  • @elmergas2814
    @elmergas2814 2 หลายเดือนก่อน

    have to be a better one Rockford or something

    • @BeatSonicUS
      @BeatSonicUS  2 หลายเดือนก่อน

      I like ours.