I have done Remington 870 and a Remington 270 bolt action, both turned out great. Very easy to apply. I have had the wrap on my 870 for at least 6 years and still looks great.
Dude this was hard af. I do construction and work with tools every day. I mess with guns and bows everyday and I promise you it is not easy. But you can make it looks really good. Just keep peeling back up if you get a bubble or wrinkle and LIGHTLY heat and pull and stick, but yea save your extra pieces, mine didn’t line up and I’m glad I had some extra pieces. DO NOT DO THIS OR CUT WITH A RAZOR ON A EXPENSIVE GUN ESPECIALLY WOOD! I tried to go as light at possible and it still hit the wood.
@@muddypondoutdoors you will get it, we’ll this was 2 days ago so I’m shure you did get it. Just use your extra pieces and just make it look as good as possible.
I love the way my mossberg 500 looks now…. I didnt doo the whole gun.. jus the fore end and butt stock. Looks awesome. But other then some little wrinkles on the curved parts like the hand grip part. But yes i love it.
At 5:53 - For trimming the wrap on the back of the stock. Do you recommend any other way? I think I will just use a sharp pair of scissors to trim the wrap from the back of the stock. This way, it does not scratch the wood stock finish on my 1100.
there is no way I would dampen my barrels cooling by putting a wrap on it NO WAY!!! may be some high temp Thermally conductive paint if need but other wise no!
![ปฏิเสธไม่ไหว (Crush on you) - LIPTA feat. No One Else [Official MV]](http://i.ytimg.com/vi/NBw1jF342vw/mqdefault.jpg)
I have done Remington 870 and a Remington 270 bolt action, both turned out great. Very easy to apply. I have had the wrap on my 870 for at least 6 years and still looks great.
Make sure youre in a good mood and had a good nights sleep before starting this project! Hard work but well worth it!
Glad to see there is a wrap for my shotgun. Almost spent alot of money buying a camo stock and barrel.
Couldn't have done a better job. Bravo and thank you as im about to give it a try.
Dude this was hard af. I do construction and work with tools every day. I mess with guns and bows everyday and I promise you it is not easy. But you can make it looks really good. Just keep peeling back up if you get a bubble or wrinkle and LIGHTLY heat and pull and stick, but yea save your extra pieces, mine didn’t line up and I’m glad I had some extra pieces. DO NOT DO THIS OR CUT WITH A RAZOR ON A EXPENSIVE GUN ESPECIALLY WOOD! I tried to go as light at possible and it still hit the wood.
Same. Started on this project tonight and I’m sweatin
@@muddypondoutdoors you will get it, we’ll this was 2 days ago so I’m shure you did get it. Just use your extra pieces and just make it look as good as possible.
My kit just showed up, the video makes it look so easy but I’d be lying if I said I’m going into this project confident
I just purchased a used FX impact Mark 3 air rifle but it's wrapped and I want to remove the wrap. Is it difficult to do?
Nice job there, excellent tutorial thanks
I just received my kit. The graphics are pretty blurry. Is that normal?
Does it matter if it is a pump?
Can I leave the wrap on the recoil pad or do I cut it off?
I love the way my mossberg 500 looks now…. I didnt doo the whole gun.. jus the fore end and butt stock. Looks awesome. But other then some little wrinkles on the curved parts like the hand grip part. But yes i love it.
Oh and the checkered parts kind of messed with it
The best mossy oak
I know I may sound ignorant for asking this but Will that kit fit a Hatfield sas 20 gauge ?
Yep
Take your time and it’ll turn out good.
That shotgun looked so tough once it was camo-wrapped!!!
Just finished mine, didn't come with the forend piece
I want to put this on my bicycle!
That's a great idea. How did it turn out ?
Is it removable? It's my only concern
+Jean-Christophe Dancause Yes it is.
Mossy Oak Graphics
At 5:53 - For trimming the wrap on the back of the stock. Do you recommend any other way? I think I will just use a sharp pair of scissors to trim the wrap from the back of the stock. This way, it does not scratch the wood stock finish on my 1100.
Hi! Yes, scissors would work fine.
Mossy Oak Graphics Awesome and Thx!
Will it work on laminated wood stocks?
Ryan Ford works on any type stock
Great vid man Smile More God Bless 👍
Does this fit my old Browning Auto-5?
How about a Remington super mag 870 will it fit it
yup
sera que esse tipo de adesivo pega bem em coronha de polímero?
there is no way I would dampen my barrels cooling by putting a wrap on it NO WAY!!! may be some high temp Thermally conductive paint if need but other wise no!
I have an 870 12 gauge