Industrial Sewing Machine clutch motor cleaning to properly engage the drive pulley.

I'll be cleaning the mechanism on a Consew industrial clutch motor. Preparing it to be used on my Singer 241-12 Industrial sewing machine.
0:00 - Intro
0:40 - Singer 241-12 clutch motor condition.
1:37 - Singer 241-12 industrial sewing machine clutch motor, how it engages.
9:36 - Clutch motor parts cleaned.
13:00 - Clutch motor cleaned and adjusted.

[@jeanettemitchell6357]

Thank you! Just what I needed to see for a motor that is not engaging. ❤🎉😊

[@fuzzjunky]

omg thank you. fixing my brothers heavy weight seiko. he thinks it's too worn to save, i keep telling him the bitey clutch is just making it awful to use. he SHALL NOW THE TRUTH

[@mickey2pair]

Thank you! I’ll be taking my 111w clutch apart immediately for this service. I had no idea. So glad I can across this video.

[@petemacfarlane6478]

Excellent 👌 thanks for posting, very thorough and helpful.

[@OldspeedMFG]

Hi, just got a 1941 Singer 241-2 (for free!) and thought I would put a servo I have lying around on it, but it turns out the entire setup, the machine, the motor, the table, bobbin winder and switch box are original to 1941 and in great shape so now I don't want to separate them. I will be trying this cleaning method to get the clutch to slip nicely again. Thanks for making this video!

[@OldspeedMFG]

Update: this worked great! It's a little eager to start moving fast but I can go slow enough to navigate turns and inch up to a needle-down 90 degree turn etc. Thanks for the video!

[@magicman9486]

Need to try this tomorrow.

[@LennertBakker]

Thanks! My Adler was kind of on/off when I bought it. Now I can go slow again. Almost ordered a servo motor, now it can wait.

[@Junniebaby]

S

[@docmazet]

SAME THING! The motor for a mitsubishi I recovered was beyond filled with dust balls. Gave it a major clean up and scrub and it worked beautifully. Now the machine is amazingly smooth! Thanks for uploading this video!

[@mcm9329]

still helpful..thanks from Australia

[@tonyd8721]

Thank you, very helpful.

[@jackgabbert3233]

Hello Again,
Thank you for doing this video, I appreciate it very much.
I get the feeling from watching a number of your other videos that you have quite a strong knowledge base.
Please consider this request to do more of this type of video showing how to adjust - maintain - repair and operate the various sewing machines and equipment you highlight.
Best Regards,
Jack

[@RaphaelKoduah]

Hi
Please can you show me how to connect the motor to the switch

[@toni8632]

Hey i have a juki motor that humms when on but the wheel doesn't engage. It used to sound like yours too but now you just feel the hum, what might be the problem?

[@katherinebarbery1762]

What would cause the motor to scream when running fast and when power is switched of,stopping the motor?

[@BlacksPorsche986]

possible dry or bad bearing

[@judithannan1726]

Hello,how about if the clute is broken

[@yonasyosief1542]

Why put marking on the motor with pencil

[@katherinebarbery1762]

I have had a new cork plate fitted to a singer motor,the hand wheel is jammed any ideas???

[@BlacksPorsche986]

Have a tech look at it.

[@doylekoehn220]

readjust the brake, the cork is probably thicker, so the brake is too tight.

[@lisaconnell-hudson9623]

What kind of oil

[@BlacksPorsche986]

Quality sewing machine oil.