Leveling you archery sight

แชร์
ฝัง
  • เผยแพร่เมื่อ 22 ธ.ค. 2024

ความคิดเห็น • 31

  • @incorporeal3793
    @incorporeal3793 5 ปีที่แล้ว +1

    I've no interest in target archery, but I still like watching your content and find these videos interesting, Steven. Keep it up, dude.

  • @lloydwellington5271
    @lloydwellington5271 5 ปีที่แล้ว +1

    Brite site customer service is top notch. I purchased the whole set up, the magnet in the string level wasn't glued in. I was more than content to slop some glue in the recess and be done with it. I only emailed them to ensure QC was being watched, they promptly sent out a new one.
    That being said why don't you have the over engineered PSE fixture?

  • @mosestomas6460
    @mosestomas6460 5 ปีที่แล้ว

    Looking jacked Steven. Thank You for all the info.

  • @reviloford5072
    @reviloford5072 4 ปีที่แล้ว

    You and Lucas from Lancaster Archery are my favorite archery youtube guys.

  • @TheAegisClaw
    @TheAegisClaw 5 ปีที่แล้ว

    We have a bike stand at our club to clamp the long rod in. A vice and a couple of blocks of wood would be similarly useful.

  • @HighRoad317
    @HighRoad317 3 ปีที่แล้ว

    Excellent tools.... Good times

  • @cjlures8618
    @cjlures8618 5 ปีที่แล้ว +2

    just because bubble is between 2 Ines does not make it level should be equal distance from edge of bubble to line

  • @timjoinson7232
    @timjoinson7232 5 ปีที่แล้ว +1

    Did you check the bow against the upright to see what happened to the bubble on the sight after tuning? It would be interesting to know whether it ended up level or still slightly off.

    • @archerash6695
      @archerash6695 2 ปีที่แล้ว

      After any tuning, its common practice to go through all your sight levels again incase the string angle has change slightly.
      Especially with Bowtechs Deadlock Cam System.

  • @anthonyfranken1306
    @anthonyfranken1306 5 ปีที่แล้ว +2

    Very informative vid thanks.
    BTW does your missus know you use the kitchen bench to work on your bows? XD XD

    • @sahhull
      @sahhull 5 ปีที่แล้ว +1

      I use the gas stove for heating points when I'm making arrows , kitchen work surfaces are great.
      I also use the dining table to align my bows and for fletching arrows

  • @saahilminocha4403
    @saahilminocha4403 5 ปีที่แล้ว +1

    Could you please do a review on the Hoyt Invicta?

    • @playa3086
      @playa3086 5 ปีที่แล้ว

      @ don't know. He liked the other Hoyt he reviewed not long ago. I think he is honest.

    • @playa3086
      @playa3086 5 ปีที่แล้ว +1

      @ I know Steven it's his sense of humour. That's all

  • @mick-d101
    @mick-d101 5 ปีที่แล้ว

    What about using a HTM levelling vise & tools?

  • @nathinlynn4090
    @nathinlynn4090 5 ปีที่แล้ว +2

    You have to watch the bottom level on the bright sight leveler mine was off because of the glue that held it on had more glue on one side then the other. So I put another level where the sight mount goes and glued the bright sight level correctly.

  • @BrockNessMonster1991
    @BrockNessMonster1991 5 ปีที่แล้ว +2

    Hey bro, you got a cabinet open 🧐

  • @sahhull
    @sahhull 5 ปีที่แล้ว +1

    I bought a few level tools and made a jig to sort my bow.
    I live in a house that is 120 years old. Nothing is either flat or plumb. No way can I use any door or wall in the house

  • @rolyebe1066
    @rolyebe1066 5 ปีที่แล้ว

    Interesting tips great stuff all ways good

  • @Son_of_Docent
    @Son_of_Docent 5 ปีที่แล้ว

    Don't you need to adjust 3d axis when the bow is at full draw? Raiser geometry is changing and sight angle too.

    • @sahhull
      @sahhull 5 ปีที่แล้ว +1

      I've never needed to

  • @b4bluey
    @b4bluey 5 ปีที่แล้ว +2

    Please put the camera on what your doing as all we can see is YOU ??

    • @sahhull
      @sahhull 5 ปีที่แล้ว

      Listen to the words. To be fair this isn't difficult. It can be a fiddle and take some time. You don't need to see

  • @Gibsonlife573
    @Gibsonlife573 3 ปีที่แล้ว

    I believe your 100% correct and I believe it's me It is bull crap you only make less than 10% that's crazy early all the cheaper made stuff the Internet is gonna drive good archery shops out of business

  • @pellet_on_pellet
    @pellet_on_pellet 5 ปีที่แล้ว +1

    Do you really think those bubbles are in the dead centre of the marks? Wow I would not take my bow to you to adjust. Whatever makes you happy but if you charged me and set it up like that I wouldn’t be happy!!!!

    • @charlesjones1535
      @charlesjones1535 5 ปีที่แล้ว

      Looks like a parralax error in the photo to me. And even if it's not, his scores aren't too bothered by being a little bit out.

  • @skepticalmechanic
    @skepticalmechanic 4 ปีที่แล้ว

    Leveling you archery sight?

  • @playa3086
    @playa3086 5 ปีที่แล้ว

    Can I "borrow" your leveling gear please Steve. Lol

  • @archerash6695
    @archerash6695 2 ปีที่แล้ว

    Bow vise.

  • @popcorngenerator1925
    @popcorngenerator1925 5 ปีที่แล้ว +1

    Good chance your doorframe isn't level.