MAN! That knot is the truth!!! I didn't use tape or zip ties on that knot. I was able to pull my direct burial wire out of the almost-frozen ground to keep the contractor from snatching it out of my workshop!! Thanks again!!!
I watched the whole video, and I appreciate the content. Using your knot setup, I just pulled 3 conductor, 4/0 cable through about 70 ft of conduit with 4 full turns. It worked like a charm.
I need to pull a security wire by string through a conduit to my building. I wasn't sure how to attach the string to the wire. I watched some videos and was still a bit confused until I watched yours. Using the big pole to represent the wire and the rope to represent the string made it easy to see and your explanation made it very understandable. Thanks.
I've pulled miles of 500 mcm wire, many parallels, through 4 and 6 inch conduit over the years using the half hitch. Never had a failure to pull, quik and easy .
The way I was shown when I started in the trade was using a simple overhand knot on the first one then taping the knot and the tail of the string to the wire or cable. It doesn’t matter as much what knot is used before the half hitches, as long as it is secured. The one you used is a lark’s head. It has a few other names (Cow hitch, I think).
Just had the worst wire pull I’ve ever experienced. I’m only a second year apprentice. But my journeyman is on year 15. And it was his worst also. Half hitch was the only knot to use. Never seen it used with the first knot you used. But thanks will try it on the next pull!
I use this ALL the time, thanks so much! Fun story: Had to pull parallel 500s over about 300 feet with a 90 degree turn at the end, used this and it worked so good for the first set, second set however.... We got NEARLY to the end and it got stuck, and our 10,000lb tugger (never went over 1000lbs on the controls) BENT IN HALF. So we rented another one, 6000lbs cuz that's what was available and the rope snapped (7500lb rated rope). So we had to cut through the slab and dig down to our PVC, careful not to damage the water pipes right next to them, cut it open and re-tie the end. It had gotten caught on a cheated pipe from the previous crew who did the groundwork. Pulled through the rest like a charm. Needless to say I had some choice words for the guys that put in that PVC originally lmao
You're starting half hitch is as easy as a couple of wraps and some electrical tape. The hitches after that are the ones that really count. Plus, who feels like dealing with that when you're trying to get the rope off the cable at the end of the pull? "Not me," says the guy covered in yellow 77
Come to think of it, besides being useful for pulling wire, that looks like a great way of pulling a straight run of pvc pipe through a straight run of secondary containment pipe.
But how do you pull it? I've got four 2/0 conductors to pull through 130' of pvc.. its ran, but they left 30' on both ends, id like to reclaim some of that, since it's a usable length.
I did this on my job, while the boss wasn't looking . Because if he saw me doing it, he'd demand I just use the fish tape in an overfilled pipe. And struggle and stress like the rest of the crew
In my 50 years as a sparky never tied knots on wire. Produces too much bulge. Have 7 different sizes of pulling grips. Would weave a grip just the right size for pulling 3#2'S and a #6 ground to one end of a 1/2" nylon pulling rope and weave a larger grip on other end to take care of pulling cable thru 2" conduit. Used both ends of these grips hundred of times over the years and gave it to a young electrician when I retired.
Pulling grips are great also but I was told yesterday( which is why I looked up this knot for home use) that you can use this type of know for fiber jumpers to pull indoor fiberotic cables. If you do damage the fiber you can clean the end and light test it and move on!!! Thanks!
I tend to have the most luck splitting the conductors (usually about 1½' for something like 600 kcmil or something) and folding them through a single smaller knot then tape it with 2" super33 or 88
Should let people know that this doesn't work well with the synthetic bailing twine type of pull they sell to homeowners at places like home depot. Electrician tape works well, but the twine pull slipped off using this knot. Lots of time wasted.
NOPE NOT that Knot!! Use the Clove hitch. with a couple of half hitches. Works everytime. As well on your clove hitch have the end long enough to tape to that which is being pulled. Keeps the end from loosening up .
???? This looks like a good knot for dragging downed tree logs through the forest.... but for *cable pulling??!?* This knot, while it might be secure, is adding *bulk* to the diameter of the cable you're pulling - which is the last thing you'd wanna do. If you make your wire loop well enough, which knot you use will be less important.
MAN! That knot is the truth!!! I didn't use tape or zip ties on that knot. I was able to pull my direct burial wire out of the almost-frozen ground to keep the contractor from snatching it out of my workshop!! Thanks again!!!
I watched the whole video, and I appreciate the content.
Using your knot setup, I just pulled 3 conductor, 4/0 cable through about 70 ft of conduit with 4 full turns.
It worked like a charm.
I need to pull a security wire by string through a conduit to my building. I wasn't sure how to attach the string to the wire. I watched some videos and was still a bit confused until I watched yours. Using the big pole to represent the wire and the rope to represent the string made it easy to see and your explanation made it very understandable. Thanks.
Thank you ! Leather work is my next journey been saving scraps to practice the sewing
Thank you for making this video... I just used this for pulling wire from my home to my shop... worked like a charm.
I had a hard time pulling that piece of 3/4" emt along with the conductors.
I've pulled miles of 500 mcm wire, many parallels, through 4 and 6 inch conduit over the years using the half hitch. Never had a failure to pull, quik and easy .
Flawless 170' pull! With lube!! Thank you!!
The way I was shown when I started in the trade was using a simple overhand knot on the first one then taping the knot and the tail of the string to the wire or cable. It doesn’t matter as much what knot is used before the half hitches, as long as it is secured. The one you used is a lark’s head. It has a few other names (Cow hitch, I think).
Thanks for adding the larks knot clarification info. I’m new to knots but this helped me out a lot! #sharetheknowledge THANKS GUYS!!!
You definitely worked with some good journeyman as an apprentice
Just awesome. Thank you, Thank you
my starting half hitch is a piece of tape. Never failed me. If you need more than that than you need to strip the head.
Cool thanks 🙏
Thanks bro, great help!! Wish you well
You're welcome! Thank you for checking it out
Just had the worst wire pull I’ve ever experienced. I’m only a second year apprentice. But my journeyman is on year 15. And it was his worst also. Half hitch was the only knot to use. Never seen it used with the first knot you used. But thanks will try it on the next pull!
works really really well with flat rope too!
Good visuals! Thanks!
Thanks for this dude
I use this ALL the time, thanks so much!
Fun story: Had to pull parallel 500s over about 300 feet with a 90 degree turn at the end, used this and it worked so good for the first set, second set however.... We got NEARLY to the end and it got stuck, and our 10,000lb tugger (never went over 1000lbs on the controls) BENT IN HALF. So we rented another one, 6000lbs cuz that's what was available and the rope snapped (7500lb rated rope). So we had to cut through the slab and dig down to our PVC, careful not to damage the water pipes right next to them, cut it open and re-tie the end. It had gotten caught on a cheated pipe from the previous crew who did the groundwork. Pulled through the rest like a charm. Needless to say I had some choice words for the guys that put in that PVC originally lmao
Good shit!
You're starting half hitch is as easy as a couple of wraps and some electrical tape. The hitches after that are the ones that really count. Plus, who feels like dealing with that when you're trying to get the rope off the cable at the end of the pull? "Not me," says the guy covered in yellow 77
Thank I always forget how to do this
Same here.
Just what I was looking for.
The first knot is actually a girth hitch, but great instructional clip overall.
Helpful 👍🏻⚡🤝🏻
Thanks buddy, saved my a$$ 😎😁
You rock! Needed to pull big cables from meter to panel and couldn’t remember knot electrician friend showed me. Worked slick with lube! Thx!
thank you! well explained
Thank you mike !
Worked a treat!! Thanks for sharing and helping 😊
Instructions unclear, i now have a 2ft length of 1/2'' emt lodged inside my conduit.
Thanks... Hi from Colombia
Thank you for watching! That’s crazy
What are those purple levels and where can I get one? They’re sick!
Come to think of it, besides being useful for pulling wire, that looks like a great way of pulling a straight run of pvc pipe through a straight run of secondary containment pipe.
you need to calm down
Thank you man!
But how do you pull it?
I've got four 2/0 conductors to pull through 130' of pvc.. its ran, but they left 30' on both ends, id like to reclaim some of that, since it's a usable length.
Exelente!!! Gracias
I did this on my job, while the boss wasn't looking . Because if he saw me doing it, he'd demand I just use the fish tape in an overfilled pipe. And struggle and stress like the rest of the crew
Then you’re a wussy
Hey John, did you used to work for Schrader electric?
Back in day I did
You're awesome. Just saying.
In my 50 years as a sparky never tied knots on wire. Produces too much bulge. Have 7 different sizes of pulling grips. Would weave a grip just the right size for pulling 3#2'S and a #6 ground to one end of a 1/2" nylon pulling rope and weave a larger grip on other end to take care of pulling cable thru 2" conduit. Used both ends of these grips hundred of times over the years and gave it to a young electrician when I retired.
Pulling grips are great also but I was told yesterday( which is why I looked up this knot for home use) that you can use this type of know for fiber jumpers to pull indoor fiberotic cables. If you do damage the fiber you can clean the end and light test it and move on!!! Thanks!
Your first knot is a “girth hitch” the next is a succession of “half hitches” making a “Loggers hitch”
Bro, you used to work for DKD!
Yup back in the day
Need some advice
Thanks for the vid, BUT you may appreciate knowing that technically, your starting hitch is a GIRTH hitch. But again, thanks!
I tend to have the most luck splitting the conductors (usually about 1½' for something like 600 kcmil or something) and folding them through a single smaller knot then tape it with 2" super33 or 88
The knot is for pullin the last ten feet when ur original knuckle hits the puller u do the half hitc to pull the rest
@@adamjag7799 personally I use an electrician stopper knot but this one is easier to teach
Turn up the volume
I literally just braid the rope in between the wires then tape the shit out of it. Never slipped once and it’s worked on 200 ft of 500kc copper
Youll obviously cut the slack. Not obvious for ME lol
Should let people know that this doesn't work well with the synthetic bailing twine type of pull they sell to homeowners at places like home depot. Electrician tape works well, but the twine pull slipped off using this knot. Lots of time wasted.
NOPE NOT that Knot!!
Use the Clove hitch. with a couple of half hitches. Works everytime. As well on your clove hitch have the end long enough to tape to that which is being pulled. Keeps the end from loosening up .
???? This looks like a good knot for dragging downed tree logs through the forest.... but for *cable pulling??!?* This knot, while it might be secure, is adding *bulk* to the diameter of the cable you're pulling - which is the last thing you'd wanna do. If you make your wire loop well enough, which knot you use will be less important.
Wireloop? This knot is used for big wire pulls! It is hands down the most used knot
If you think this is too big for the conduit on wire with mule tape - then the conduit is likely too small for the wire you’re pulling….
Was just about to say the exact same thing. Mule tape is what a 16th in thicness. If it's a issue see wire fill lol@@NoName-semi-censored
😂
This is not a half hitch