If you have the space in the bottom of the chamber, I would recommend you line it with silicone baking paper, and a grate, to act as a standoff for boiled over resin. A stitch in time saves 9. Great build, and seal making tips!
I appreciate you applied the Teflon tape in the correct direction. In videos I all too often i see it applied in reverse direction 🙄. There are premade vaccume chambers available but i like the flexibility of separate components. Thanks for sharing this project! 😃👍
That DIY filter cone is what I need for my pump. These standard demisters always leak and the oil trails down, forming a puddle underneath the pump area.
Good job.. Years ago I built an almost identical system using a deep presser cooker.. It's still being used for de- bubbling investment for lost wax casting..
Do you think that a pot where the handles are bolted onto the pot would affect the vacuum? I can't find a pot where the handles are just on the outside and not fastened through the pot like yours are.
So I always see the repressurization and I wonder, is there a reason no one installs a tee inside to have the air disperse more to the sides instead of directly into the pot of whatever you presumably don't want surprise particles in?
Thanks for the aliexpress link, I have a vaccum chamber but I want to build a longer one and couldnt find the fittings and be certain they would fit together ...thanks for sharing
🎶 track? It’s *Sun Melt Waves* by *Öman* - and yes we are THRILLED to be your trusted provider. th-cam.com/video/SVRFj1ZKbXk/w-d-xo.html // Epidemic Sound
If you have the space in the bottom of the chamber, I would recommend you line it with silicone baking paper, and a grate, to act as a standoff for boiled over resin. A stitch in time saves 9. Great build, and seal making tips!
I appreciate you applied the Teflon tape in the correct direction. In videos I all too often i see it applied in reverse direction 🙄.
There are premade vaccume chambers available but i like the flexibility of separate components.
Thanks for sharing this project! 😃👍
Your designs are second to none. Thanks, excellent presentation and instruction too.
Thanks for uploading! Keep making videos! I always enjoy watching them.
That DIY filter cone is what I need for my pump. These standard demisters always leak and the oil trails down, forming a puddle underneath the pump area.
I only wanted this for to make dry freeze food/juices, thank you for the instructions, hope will be a success 😀
as per usual !
Excellent detailed explanation for an excellent project that is very useful for many of us!
Thank you so much
Good job.. Years ago I built an almost identical system using a deep presser cooker.. It's still being used for de- bubbling investment for lost wax casting..
Cool, lemme just use my harbor freight jigsaw to cut this 10mm thick, acrylic. 😂
Do you think that a pot where the handles are bolted onto the pot would affect the vacuum? I can't find a pot where the handles are just on the outside and not fastened through the pot like yours are.
So I always see the repressurization and I wonder, is there a reason no one installs a tee inside to have the air disperse more to the sides instead of directly into the pot of whatever you presumably don't want surprise particles in?
Thanks for the aliexpress link, I have a vaccum chamber but I want to build a longer one and couldnt find the fittings and be certain they would fit together
...thanks for sharing
Superb 🎉
🎶 track? It’s *Sun Melt Waves* by *Öman* - and yes we are THRILLED to be your trusted provider.
th-cam.com/video/SVRFj1ZKbXk/w-d-xo.html
// Epidemic Sound
The name of the Chinese gauge manufacturer is hilarious "YRun"..ineed !! Why run at all?
I must admit the name of video is somewhat misleading. It implies "how to build pump" as well😮
Could you share the stl of the 3D part? thanks
No presentó grietas el acrilico con los usos?
6:10 I would say that you created/installed a scrubber, rather than a filter.
Add some baking soda ash and you got a scrubber, but what are we afraid of here anyway...
@@publicmail2 Misting oil into the surrounding environment?
@@John.Flower.Productions I'm guessing you don't want the oily substance in your house.
👍👍👍👍👍👍👍👍
$80 to build the chamber? But you can get a 3 gallon chamber with fittings, gauge and hose for around $50
Cool
Manda as mensagens em português por favor
Please do a review on positron V3 upside down 3D printer by kraylin 3D.
*PromoSM*