Beautiful truck and a very clean looking, cool idea with the body mounts! Reminds me of the XMaxx and other trucks with similar mount setups. And you’re right, sport mod trucks get hot super fast with 2S 100C like we use in Trigger King. I typically bring a second sport mod or a retro to alternate driving while one cools down when I practice/bash.
New to the SMT10 and just got a builders kit. I am stuck on knowing which size of body fits the SMT10. ead that 1/10th JS bodies fit and read that 1/8th bodies are needed. Even the JS bodies show different widths and lengths! Looking to buy this mount system and get it printed,great work
you can run many different size bodies on these. It depends on what you want it to look like. It also depends on what you do with the wheelbase. I'd recommend joining a facebook group for the SMT10 and asking if anyone has the body you are looking at mounted on one.
Love this body. New smt10 was just released. I want bodies options because I am thinking of getting the kit. I do love grave digger, but do not want the rtr electronics so I think a kit would be better. Just not sure where to find bodies for it.
JConcepts has some nice bodies. If you know what you are doing, I'd build an SMT 10 from the ground up. I almost have a whole SMT 10 from the parts left over after building this one.
@@outsourcedrc I ordered a kit so i think I might go bigfoot body because I not see so many. Maybe ford but custom paint as well. Will have to see when the time comes.
Just got this for the SMT10 builders kit I'm working on. And what size magnets do I need to get? Still deciding what body to get for my build. Might go with a Black Mamba theme. And thanks for your videos, they've save and cost me money. Haha.
Is the $5.00 for the mounting kit If not you should make them on a pre-order basis the full kit cause I would buy one for my rig a Ground Pounder and see if I could make it work some , but awesome job making those and beautiful rig
Thanks. The $5 is for the files to print them your selves. I'm too busy and my Printers run non stop with other things to take the time to print all of these.
You can just unplug the batteries or you can hold the button on the ESC. Most just unplug the batteries since you need to unplug them when its off anyways.
I run mine on 3s threw the whole battery n never had an issue with stock electronics, my buddies only basher is his smt10 gravedigger n runs his threw a few batteries when we run, but his has brushless set up in his
I was going to put it on Shapeways so you could get it printed but the whole kit is like $70 with zero profit added. That is just too expensive I think.
That's what this hobby is about. CREATING
Beautiful truck and a very clean looking, cool idea with the body mounts! Reminds me of the XMaxx and other trucks with similar mount setups. And you’re right, sport mod trucks get hot super fast with 2S 100C like we use in Trigger King. I typically bring a second sport mod or a retro to alternate driving while one cools down when I practice/bash.
Great job on the body mount system!
Thanks!
Nice job. Learned a lot. Great looking truck!
Cool edit and neat course.
New to the SMT10 and just got a builders kit. I am stuck on knowing which size of body fits the SMT10. ead that 1/10th JS bodies fit and read that 1/8th bodies are needed. Even the JS bodies show different widths and lengths! Looking to buy this mount system and get it printed,great work
you can run many different size bodies on these. It depends on what you want it to look like. It also depends on what you do with the wheelbase. I'd recommend joining a facebook group for the SMT10 and asking if anyone has the body you are looking at mounted on one.
Love this body. New smt10 was just released. I want bodies options because I am thinking of getting the kit. I do love grave digger, but do not want the rtr electronics so I think a kit would be better. Just not sure where to find bodies for it.
JConcepts has some nice bodies. If you know what you are doing, I'd build an SMT 10 from the ground up. I almost have a whole SMT 10 from the parts left over after building this one.
@@outsourcedrc I ordered a kit so i think I might go bigfoot body because I not see so many. Maybe ford but custom paint as well. Will have to see when the time comes.
Just got this for the SMT10 builders kit I'm working on.
And what size magnets do I need to get? Still deciding what body to get for my build. Might go with a Black Mamba theme. And thanks for your videos, they've save and cost me money. Haha.
9.5. I'm glad my videos are helpful.
I think that awsome truck man nice!!
Thanks!
Great video. Did you design a body mount system for a Traxxas Stampede, by any chance?
I have not.
I 3D printed and tried the body mount system it works great I just need to reposition one of the parts to hold the front of the bodybetter
Thats awesome! Put a video of it up and link it here!
Is the $5.00 for the mounting kit
If not you should make them on a pre-order basis the full kit cause I would buy one for my rig a Ground Pounder and see if I could make it work some , but awesome job making those and
beautiful rig
Thanks.
The $5 is for the files to print them your selves. I'm too busy and my Printers run non stop with other things to take the time to print all of these.
Great idea thanks for sharing.
Question
I don't have a 3D printer.
Would I be violating any kind of policy if I gave this design to a Freind to print for me
Thats fine!
Is that a stock wheelbase truck?
Can you recommend a 3D printer.
Nice work I love the creativity and that is a great looking body.
Thanks!. The Ender 3 pro is a fantastic starter printer.
Would these work on a SUV body as well or just Truck bodys?
Hi, i just bought your 3d body mount file. what filament is it. pla or petg?
PLA is what I use.
@@outsourcedrc ok, thx
Tks dude ! Good to know, but still a bit complicated....
Awesome video brotha and cool editing I also subscribed
Those tires look like they would fit on a Marui Big Bear.
What system do you have in this? I have hobbywing 3300kv in might and it's fine on 3s for a full run
I have a Hobbywing 1080 80a and a Reedy Radon 30000 RPM motor.
@@outsourcedrc OK, that is brushed, that's why it runs hot.
any idea when you'll compare the maxx to an e revo?
I don't know. I guess I can do that.
Did subcribed got a? With the 2.0 revo how do u turn the car off new at this rig
You can just unplug the batteries or you can hold the button on the ESC. Most just unplug the batteries since you need to unplug them when its off anyways.
I wish I had a 3d printer, I need this for my SMT10 project
I run mine on 3s threw the whole battery n never had an issue with stock electronics, my buddies only basher is his smt10 gravedigger n runs his threw a few batteries when we run, but his has brushless set up in his
@@STEVOD313 I dont have stock electronics. Mine is set up to race in a competition. They over heat bad.
I have said it before, but this is such a nice truck. Too bad you can't drive it longer.
Can you make these for other cars
Russell Blake I’m going to try it with a 4tec and a clodbuster
Make some money man paten that Idea
First
Nice if you have a printer lol
I was going to put it on Shapeways so you could get it printed but the whole kit is like $70 with zero profit added. That is just too expensive I think.
I would need it for a 2wd rustler trying to build a drag car
@@donaldwhitted8219 I dont have it designed for a Rustler. I dont even own a 2WD Rustler.