With built in reverbs, a compressor configurable before or after the amp, and solid eq options……..I can take a Tonex one, loaded with an amp. Sprites at the edge of breakup and then the same amp dimed with a tube screamer………and be ME……….no other gear but that little pedal and whatever di box the venue has
When you adjust the input trim setting, can you save that for each preset so you can have one for single coil guitars and another for higher output humbucker guitars?
It’s very impressive how much this little pedal is capable of but in a live situation on a pedalboard it’s too much tap dancing & button pressing it’s probably just going to be a bedroom pedal for most IMO
Understandable...for me, I'm used to playing with one amp and I never change settings on it. I use my pedals to do that....so the fact that I can get 2 amps with one click is double all I'd ever need, even though it can do more.
@@HeyWorshipLeaderIf there was an option to let the HX Effects do that one click, the ToneX One would be all I need. I even thought of wiring an additional small jack in parallel with the footswitch.
I love the room and plate reverb sounds on the plugin, that alone is worth it. Cant wait for it to be available since everything right now is on preorder.
very informative! question: I know it has the "auto-save" feature but say that I'm modifying the gain on the pedal on a preset, does it tell me via colors or whatever where the original stored value was? I mean like on the iridium it goes green light when you have your knob on the original stored value...so you know by how much you are going up or down without having to rely only on your ear...pretty important! thank you.
ooo...that's a good question...Im not sure...I know the larger units do...but haven't noticed yet...when I begin using every week I'll try to remember to let you know
If you have two TONEX, then just go into the 2 inputs on your interface...if you have a single input on your interface, then you'll need to go mono, or put the TONEX ONE last and use the TRS out...but just know that the TONEX ONE is mono in...so your reverb will be summed before going back out stereo if that makes since
Dumb question time: this probably goes without saying, and so I haven't heard anyone say it - can the output go straight to FOH? Can the output level be adjusted?
I bought the big boy and the T-one as well. They sound great and I’m super pumped to get them on my board! Thanks for the video, always super helpful 🤘🏻🤘🏻🤘🏻
agreed with this...there's a point where the quality is not worth the sacrifice...but that point will be different for different people, needs, and budgets
@@HeyWorshipLeader yes! Each to their own needs. And there’s a reason why Tonex are up there against the giants like fractal, QC, line 6 and kemper. I even consider it 2nd to fractal when it comes to the quality of amp sounds.
Clickbait and useless recap. Documentation is NOT "tips". It's called RTFM and this is basic knowledge. And input trim discussed billion times on all sources already.
not clickbait...and it's no secret in the guitar community that people will do almost anything except reading a manual. This video is for those people. Have a great day
Alter Amp Works Captures 20% OFF Code (HEYWORSHIPLEADER) HERE: ►► www.alterampworks.com
Please shoot a video building a mini pedal board for live gigs with one or two of these awesome pedals sir!!!
thank you!
@@HeyWorshipLeader Maybe even with an HX Stomp
Very disappointed in the sounds especially the OD /High Gain sounds. Very grainy /fizzy. flabby bass .
They should have called it the Tonex two because practically every review I've ever seen on this pedal involves using two of them.
With built in reverbs, a compressor configurable before or after the amp, and solid eq options……..I can take a Tonex one, loaded with an amp. Sprites at the edge of breakup and then the same amp dimed with a tube screamer………and be ME……….no other gear but that little pedal and whatever di box the venue has
Thank you. Quickest tutorial I've seen thus far!
Bought one, thx for the tipps. Btw your background music is annoying and too loud. ;)
thanks for the feedback
When you adjust the input trim setting, can you save that for each preset so you can have one for single coil guitars and another for higher output humbucker guitars?
Yes! It’s per preset
It’s very impressive how much this little pedal is capable of but in a live situation on a pedalboard it’s too much tap dancing & button pressing it’s probably just going to be a bedroom pedal for most IMO
Understandable...for me, I'm used to playing with one amp and I never change settings on it. I use my pedals to do that....so the fact that I can get 2 amps with one click is double all I'd ever need, even though it can do more.
@@HeyWorshipLeaderIf there was an option to let the HX Effects do that one click, the ToneX One would be all I need. I even thought of wiring an additional small jack in parallel with the footswitch.
I love the room and plate reverb sounds on the plugin, that alone is worth it. Cant wait for it to be available since everything right now is on preorder.
thanks for sharing!
very informative! question: I know it has the "auto-save" feature but say that I'm modifying the gain on the pedal on a preset, does it tell me via colors or whatever where the original stored value was? I mean like on the iridium it goes green light when you have your knob on the original stored value...so you know by how much you are going up or down without having to rely only on your ear...pretty important! thank you.
ooo...that's a good question...Im not sure...I know the larger units do...but haven't noticed yet...when I begin using every week I'll try to remember to let you know
Need a mini pedal board build around this ToneX instead of HX Stomp 😋 ultimate mini travel rig
yes!
Can the ToneX One do acoustic IR’s well?
yes
0:37 can't wait to run my amp into the tonex one and listen on headphones ... bet that sounds amazing 😂
Haha! When I said “Your amp” I meant “ this is your amp so run any effects you want into it”
@@HeyWorshipLeader 😅🤪👏👏
Lets say i have 2 tonex and a strymon timelime and want to go stereo , how do i connect that to my audio interface? Thanks
The output is stereo, use a Tip/ring/sleeve cable, and plug into any stereo time based effects you want
@@ArtGuglielmo that s what i wanted to hear, thanks
If you have two TONEX, then just go into the 2 inputs on your interface...if you have a single input on your interface, then you'll need to go mono, or put the TONEX ONE last and use the TRS out...but just know that the TONEX ONE is mono in...so your reverb will be summed before going back out stereo if that makes since
Can you make some content with the tonex one stereo with the Hx stomp?
Coming soon! Been out of town, but I’ll be making some more videos like this shortly
Dumb question time: this probably goes without saying, and so I haven't heard anyone say it - can the output go straight to FOH? Can the output level be adjusted?
Have been wanting to get into the modeling world but was just to expensive but this I’m forsure buying
good choice
Make an all Nano pedal board video based on the ToneX 1 for church. All mini pedals. How small/good can a board be made?
I bought the big boy and the T-one as well. They sound great and I’m super pumped to get them on my board! Thanks for the video, always super helpful 🤘🏻🤘🏻🤘🏻
If you use two of them and hook your headphone on the last one in the chain both amps will sound stereo?
No, that won’t work
Did anyone else with a Tonex One start watching for the cut when he started picking at the usb cover?
M-vave Tank-G can load profile and the price is cheaper than Tonex One, I wonder how they compare to each other🤔
I think you’ll get what you pay for.. There should be a compromise as the prices go low. Im not sure
agreed with this...there's a point where the quality is not worth the sacrifice...but that point will be different for different people, needs, and budgets
@@HeyWorshipLeader yes! Each to their own needs. And there’s a reason why Tonex are up there against the giants like fractal, QC, line 6 and kemper. I even consider it 2nd to fractal when it comes to the quality of amp sounds.
Clickbait and useless recap. Documentation is NOT "tips". It's called RTFM and this is basic knowledge. And input trim discussed billion times on all sources already.
not clickbait...and it's no secret in the guitar community that people will do almost anything except reading a manual. This video is for those people. Have a great day
You are truly a special person. Ill bet you are great at parties, too.